Philips 15B1322Q11 User Manual

15B1322Q11

AutoScan Color Monitor

English Operating Instructions .................... 2 - 23

Français Mode d'emploi ……………... 24 - 45

Appendix

English Information for Users in the U.S. ........ A1

Declaration FCC ........ A2

Warranty/address ........ A3

TCO'95 A6 ........ A7

ENERGY DECLARATION ........ A8

Français Declaration FCC ........ A4

Deutsch Hinweis/GS/ACHTUNG ........ A5

For Customer Use:

Enter below the Serial No. which is located on the
back of the cabinet. Retain this information for
future reference.

Model No. 15B1322Q11

Serial No.

E
N

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE

CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

NE PAS OUVRIR

This "bolt of lightning" indicates that uninsulated material
within your unit may cause an electrical shock. For the safety

of everyone, do not remove product covering.

This "exclamation point" calls attention to a feature for which
you should read the enclosed literature carefully to prevent operating
and maintenance problems.

IB7948B001

1

E
N

Introduction

The PHILIPS 105B colour monitor displays sharp and brilliant images
of text and graphics with a maximum resolution up to 1280x1024 pixels.
It is optimal for Windows, CAD / CAM / CAE, desktop publishing,
spread sheets, multi-media, and any other application which demands
large screen size and high resolutions.

This monitor automatically scans horizontal frequencies from 30KHz to
70KHz, and vertical frequencies from 50Hz to 120Hz. With
microprocessor based digital controlled circuit, the monitor can
automatically adjust itself to the video card’s scanning frequency and
displays an image with precise parameters you desire. The wide range
of scanning frequency supports variety of operating platforms, such as
IBM PC and compatibles, Apple’s Macintosh, Quadra and Centris
families, Power PC and workstations.

Feature Highlights

• On-Screen-Display function provides more informations when the
user operates the control functions. This feature provides user­friendliness and ease-of-use when operating the monitor.

• Anti-Glare and Anti-Static screen coating eliminate any bad effects
caused by the screen surface such as reflection of the room lights
and dust attraction.

• With Color Adjustment function you can easily choose different
preset color temperatures or set your own customized color
parameters.

• Image Tilt Adjustment function provides correction of rotated image.
This correction can minimize the distortions caused by outside
environments, such as earth magnetic field.

• With built-in Audio Functions and Microphone the monitor can
connect with an MPC system, sound card, CD-ROM, or any sound
source to operate for multi-media applications.

• Green Design including automatic power saving function (NUTEK)
and low emission TCO'95 (15B1322Q) compliance shows our
commitment in environmental care.

• DDC1/DDC2B allows communication between the monitor and PC
system for optimal video configuration.

2

Note: If you experienced your monitor display is changing from color to
mono, it's possible that you are using a non-VESA-DDC-standard video
card. Please consult with your local Philips dealer for more information.

As an Energy Star partner, PHILIPS, has determined that this product
meets the Energy Star guidelines for energy effficiency.

ENERGY STAR is a U.S. registered mark.

IBM, IBM PC and Power PC are registered trademarks of International
Business Machines Corporation.

Apple, Macintosh, Quadra and Centris are registered trademarks of
Apple Computer, Inc.

Some of the functions mentioned above such as Audio and Tilt correction
are optional. You may have different options with the monitor you
purchased.

E
N

3

E
N

Safety precautions and maintenance

◆ Disconnect the monitor from the mains supply if the monitor is not to
be used for an extended period of time.

◆ Do not attempt to remove the back cover, as you will be exposed to
a shock hazard. The back cover should only be removed by qualified
service personnel.

◆ Do not place objects on top of the monitor cabinet, which could fall
into vents or which could cover them and prevent proper cooling of

◆

the monitor’s electronic devices.
Do not expose the monitor to rain or excessive moisture to avoid the

risk of shock or permanent damage to the set.

◆ Do not use alcohol or ammonia based liquid to clean the monitor. If
necessary, clean with a slightly damp cloth. Disconnect the monitor
from the mains supply before cleaning.

◆ Consult a service technician if the monitor does not operate normally
when operating instructions of this manual are followed.

Package

Your PHILIPS 105B package includes the following items:

• The monitor (integrated with tilt / swivel pedestal)

• Power cord

• Interface cable (flying-in)

• Audio cable

• Microphone connector cable

• MAC adapter

End of life disposal

Your new set contains materials which can be recycled and reused.
Specialized companies can recycle your product to increase the amount
of reusable materials and to minimize the amount of materials to be
disposed of.

Please inform yourself on local regulations on disposal of your old set.

4

Installation

B

105

Important: Please refer to the user’s manuals of your computer
and video adapter to make sure these equipments are properly
installed and configured before installing the monitor.

Positioning / Ventilation

◆ Avoid exposing the monitor to direct sunlight, stoves or any other
heat sources.

◆ To prevent overheating, make sure that the ventilation openings of
the monitor are not covered.

◆ Keep moisture and dust away.

◆ Keep away from any magnetic objects, such as speakers, electric

motors, transformers, ...etc.

◆ When positioning this monitor, make sure that the mains plug and
socket are easily accessible.

Pedestal

With the built-in pedestal you can tilt and / or swivel the monitor for a
most comfortable viewing angle.

E
N

5

E
N

Connection

Important: Please make sure the AC power to your computer is
“OFF” before connecting or disconnecting any display
peripheral. Failure to do so may cause serious personal injury
as well as permanent damage to your computer equipments.

1. IBM PC, PC/XT, PC/AT, PS/2, or the compatibles:

• Connect the monitor to the computer using the supplied interface
cables. Connection with computer system other than IBM PC or
Apple computers may need different type of adapters . Please consult
your computer supplier for these adapters. Connect the shielded
power cord to a wall outlet after the interface cable is properly
connected.

Monitor rear view

VIDEO IN

VIDEO IN

Apple adapter

6

2.Earphone Connection :

Connect your earphone plug (must be mini Jack type) to the
earphone connector on the left side of the monitor.

The speakers will be switched off when earphone is plugged in.

3.External Microphone Connection :

Connect your microphone plug to the microphone connector on
the left side of the monitor.

The internal microphone will be switched off when external
microphone is plugged in.

E
N

7