Philips 150P2D74 User Manual

Philips 150P2E/150P2D Electronic User's Manual

file:///D|/Grace/150P2/english/150p2e/index.htm [8/9/2001 11:25:13 AM]

Safety and Troubleshooting Information

Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Unplug the monitor, if you are not going to use it for an extensive period of time.● Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry

cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based liquids.

●

Consult a service technician if the monitor does not operate normally when following the instructions in this manual.

●

The casing cover should be opened only by qualified service personnel.● Keep the monitor out of direct sunlight and away from stoves or any other heat source.● Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.● Do not block the ventilation holes on the cabinet.● Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.● When positioning the monitor, make sure the power plug and outlet are easily accessible.● If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds, then attach

the power cable or DC power cord for normal operation.

●

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or excessive moisture.

●

When positioning the monitor, make sure the power plug and outlet are easily accessible.● Notice that always activate a screen saver program during your application. If an image remains in

the screen for an extended period of time, it may leave an after-image in front of the screen. The after-image will disappear gradually over a period of time after switching off the power.

●

Consult a service technician if the monitor does not operate normally when operating instructions of this manual are followed.

RETURN TO TOP OF THE PAGE

Installation Locations

Avoid Heat and Extreme Cold●

Safety & Troubleshooting

file:///D|/Grace/150P2/english/150p2e/safety/safety.htm (1 of 2) [8/9/2001 11:25:18 AM]

Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold.● Avoid moving the LCD monitor between locations with large temperature differences. Choose a site

falling within the following temperature and humidity ranges.

Temperature: 5-35°C 41-95°F

❍

Humidity: 20-80% RH❍

●

Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD monitor inside a car trunk.

●

Take care not to mishandle this product by either knocking or dropping during operation or transportation.

●

Do not store or use the LCD monitor in locations exposed to high humidity or a dusty environment. Also do not allow water or other liquids to spill on or into the LCD monitor.

●

RETURN TO TOP OF THE PAGE

Safety & Troubleshooting

file:///D|/Grace/150P2/english/150p2e/safety/safety.htm (2 of 2) [8/9/2001 11:25:18 AM]

About This Manual

About This Guide • Notational Descriptions

About This Guide

This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other pertinent information. Its contents are identical to the information in our printed version.

Sections are as follows:

Safety and Troubleshooting Information provides tips and solutions for common problems as well as

other related information you may need.

●

About This Electronic User's Manual gives an overview of information included, along with notation icon descriptions and other documentation for your reference.

●

Product Information gives an overview of the monitor's features and as well as the technical

specifications for this monitor.

●

Installing Your Monitor describes the initial setup process and gives an overview of how to use the

monitor.

●

On Screen Display provides information on adjusting the settings on your monitor.● Customer Care and Warranty contains a list of worldwide Philips Consumer Information Centers

along with help desk phone numbers and information on the warranty applicable to your product.

●

Glossary defines technical terms.● Download and Print Option transfers this entire manual to your hard drive for easy reference.●

RETURN TO TOP OF THE PAGE

Notational Descriptions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions, or warnings. They are used as follows:

NOTE: This icon indicates important information and tips that help you make better use of your computer system.

About This Electronic User's Manual

file:///D|/Grace/150P2/english/150p2e/about/about.htm (1 of 2) [8/9/2001 11:25:20 AM]

CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.

WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem.

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.

RETURN TO TOP OF THE PAGE

part is prohibited without written consent of Philips Electronics N.V.

About This Electronic User's Manual

file:///D|/Grace/150P2/english/150p2e/about/about.htm (2 of 2) [8/9/2001 11:25:20 AM]

Product Information

Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function

Product Features

150P2E / 150P2D

15" color LCD monitor with excellent display performance● Dual input- accepts both DVI Digital and VGA analog inputs● Embedded universal AC power supply● Linear height adjustment for best viewing position● Advance AUTO adjustment optimizes picture quality.● Rotation for both Portrait and landscape display● User installable bezel for optional protective cover choice● Optional USB powered hub●

RETURN TO TOP OF THE PAGE

Technical Specifications*

LCD PANEL

• Type TFT LCD

• Screen size 15" visual

• Pixel Pitch 0.297 x 0.297mm (15.0")

• LCD Panel type

1024 x 768 pixels R.G.B. vertical stripe Anti-glare polarizer hardness

• Effective viewing area 304.1 x 228.1mm (15.0")

• Display Colors 8 bits interface (16M colors)

SCANNING

• Vertical refresh rate 56Hz-76Hz

• Horizontal frequency 30KHz-61KHz

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (1 of 8) [8/9/2001 11:25:22 AM]

VIDEO

• Video dot rate 80 MHz

• Input impedance

- Video 75 ohm

- Sync 2 kOhm

• Input signal levels 700m Vpp

• Sync input signal

Separate sync Composite sync

Sync on Green

• Sync polarities Positive and negative

• Input Frequency

XGA Hsync 48- 61 KHz, Vsync 60 - 76 Hz (N.I.) SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.) VGA Hsync 31- 38 KHz, Vsync 60 - 76 Hz (N.I.)

• Video interface

Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are available It can be switching via OSD selection.

OPTICAL CHARACTERISTICS

• Contrast ratio 300 (typ.)

• Brightness

250 cd/m2 (typ.)

• Peak contrast angle 6 o'clock

• White Chromacity x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)

• Viewing Angle (C/R >5)

Upper >55° (typ.) Lower >60° (typ.) Left >75 ° (typ.) Right >75 ° (typ.)

• Response time <=45ms (typ.)

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Resolution & Preset Modes

• Maximum 1024 x 768 at 75Hz

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (2 of 8) [8/9/2001 11:25:22 AM]

• Recommended 1024 x 768 at 60Hz

14 user definable modes

14 factory preset modes:

H. freq (KHz) Resolution V. freq (KHz)

31.469 640*350 70.086

31.469 720*400 70.087

31.469 640*480 59.940

35.000 640*480 67.000

37.861 640*480 72.809

37.500 640*480 75.000

35.156 800*600 56.250

37.879 800*600 60.317

48.077 800*600 72.188

46.875 800*600 75.000

49.700 832*624 75.000

48.363 1024*768 60.004

56.476 1024*768 70.069

60.023 1024*768 75.029

RETURN TO TOP OF THE PAGE

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving features:

Power Management Definition

VESA Mode Video H-sync V-sync Power Used LED color

ON Active Yes Yes < 23W Green

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (3 of 8) [8/9/2001 11:25:22 AM]

Stand-by Blanked No Yes < 3W Amber Suspend Blanked Yes No < 3W Amber

OFF Blanked No No < 3W Amber

This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the

ENERGY STAR

guidelines for energy efficiency.

RETURN TO TOP OF THE PAGE

Physical Specifications

• Dimension (WxHxD) 380 x 360 x 165 mm (incl. Pedestal)

• Weight 5.4 Kg

• Swivel + - 175°

• Height adjustment range 50mm

• Portrait display 90° rotation counter clockwise

• Tilt (Forward / Backward) - 5° / 25°

• Power supply 100 — 240 VAC, 50/60 Hz

• Power consumption 23 W (typ.)

• Temperature (operating) 5° C to 35° C

• Relative humidity 20% to 80%

• System MTBF 50K hrs (CCFL 40Khrs)

• Cabinet color

150P2E: Light Gray 150P2D: Black

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Pin Assignment

1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the table:

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (4 of 8) [8/9/2001 11:25:22 AM]

Pin No.

Signal Assignment

No.

Signal Assignment

Pin No.

Signal Assignment

1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data02 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+

T.M.D.S. Data2/4 Shield

T.M.D.S. Data1/3 Shield

T.M.D.S. Data0/5

Shield 4 No connect 12 No connect 20 No connect 5 No connect 13 No connect 21 No connect

6 DDC Clock 14 +5V Power 22

T.M.D.S. Clock

Shield 7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ 8 No connect 16 Hot Plug Detect 24 T.M.D.S. Clock-

2. The 15-pin D-sub connector (male) of the signal cable:

No.

Assignment

No.

Assignment

1 Red video input 9 DDC +5V 2 Green video input 10 Logic ground

3 Blue video input 11

Identical output - connected to pin 10

12 Serial data line (SDA)

5 Cable detect 13 H. Sync / H+V 6 Red video ground 14 V. Sync

7 Green video ground 15 Data clock line (SCL) 8 Blue video ground

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (5 of 8) [8/9/2001 11:25:22 AM]

RETURN TO TOP OF THE PAGE

Product Views

Follow the links to see various views of the monitor and its components.

Front View Product Description

RETURN TO TOP OF THE PAGE

Physical Function

1) Tilt

2) Swivel

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (6 of 8) [8/9/2001 11:25:22 AM]

3) Height adjustment

4) Portrait display

Turn monitor from landscape view to portrait view

4.1) Tilt the monitor body at an angle

4.2) Rotate the monitor body 90 degrees counter clockwise.

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (7 of 8) [8/9/2001 11:25:22 AM]

RETURN TO TOP OF THE PAGE

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (8 of 8) [8/9/2001 11:25:22 AM]

Installing your LCD Monitor

Your LCD Monitor : Front View Product Description • Connecting to Your PC • Remove and

Re-install the Base • Getting Started • Optimizing Performance • Accessories (optional)

Front View Product Description

UP and DOWN buttons are used when adjusting the OSD of your monitor

LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor.

BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are pressed, the adjustment controls for the BRIGHTNESS will show up.

OK button which when pressed will take you to the OSD controls

Installing your LCD Monitor

file:///D|/Grace/150P2/english/150p2e/install/install.htm (1 of 2) [8/9/2001 11:25:24 AM]

POWER button switches your monitor on

Automatically adjust the horizontal position, vertical position, phase and clock setting.

RETURN TO TOP OF THE PAGE

Optimizing Performance

For best performance, ensure that your display settings are set at 1024x768@60Hz (for14"/15") or 1280x1024, 60Hz (for17"/18").

●

Note: You can check the current display settings by pressing the "OK" button once.

Go into the Product Information. The current display mode is shown on the item called RESOLUTION.

You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor, included in this CD. A step-by-step instructions is provided to guide you through the installtion process. Click on the link to know more about this program.

More about

FP_setup01.exe

●

RETURN TO TOP OF THE PAGE

Installing your LCD Monitor

file:///D|/Grace/150P2/english/150p2e/install/install.htm (2 of 2) [8/9/2001 11:25:24 AM]

On-Screen Display

Description of the On-Screen Display • The OSD Tree

Description of the On Screen Display

What is the On-Screen Display?

This is a feature in all Philips LCD monitors which allows an end-user to adjust screen performance of monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.

Basic and simple instruction on the control keys.

On the front controls of your monitor, once you press the

button, the On Screen Display (OSD) Main

Controls window will pop up and you can now start making adjustments to your monitor's various features. Use the

or the keys to make your adjustments within.

RETURN TO TOP OF THE PAGE

The OSD Tree

Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments.

Analog signal input:

On-Screen Display

file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (1 of 4) [8/9/2001 11:25:27 AM]

On-Screen Display

file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (2 of 4) [8/9/2001 11:25:27 AM]

Digital signal input:

RETURN TO TOP OF THE PAGE

On-Screen Display

file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (3 of 4) [8/9/2001 11:25:27 AM]

On-Screen Display

file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (4 of 4) [8/9/2001 11:25:27 AM]

Customer Care & Warranty

PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE

WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece •

Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland • Spain • United Kingdom

EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Turkey LATIN AMERICA: Antilles • Argentina • Brasil • Chile • Colombia • Mexico • Paraguay • Peru

• Uruguay • Venezuela

NORTH AMERICA: Canada • USA PACIFIC: Australia • New Zealand ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia •

Pakistan • Philippines • Singapore • Taiwan • Thailand

AFRICA: Morocco • South Africa MIDDLE EAST: Dubai • Egypt

Customer Care and Warranty

file:///D|/Grace/150P2/english/warranty/warranty.htm [8/9/2001 11:25:29 AM]

Glossary

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Color temperature

A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source.

Most Philips monitors offer the possibility of setting the color temperature to any desired value.

RETURN TO TOP OF THE PAGE

D-SUB USB

Your monitor comes with a D-Sub cable.

Digital Visual Interface (DVI)

The Digital Visual Interface (DVI) specification provides a high-speed digital connection for visual data types that is display technology independent. The interface is primarily focused at providing a connection between a computer and its display device. The DVI specification meets the needs of all segments of the PC industry (workstation, desktop, laptop, etc.) and will enable these different segments to unite around one monitor interface specification.

The DVI interface enables:

Content to remain in the lossless digital domain from creation to consumption.1. Display technology independence.2. Plug and play through hot plug detection, EDID and DDC2B.3. Digital and Analog support in a single connector.4.

RETURN TO TOP OF THE PAGE

Glossary

file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (1 of 4) [8/9/2001 11:25:31 AM]

Energy Star Computers Programme

An energy conservation programme launched by the US Environmental Protection Agency (EPA) with the primary aim of promoting the manufacture and marketing of energy-efficient office automation equipment. Companies joining this programme must be willing to commit themselves to manufacturing one or more products capable of going into a low -power state (< 30 W) either after a period of inactivity or after a predetermined time selected by the user.

RETURN TO TOP OF THE PAGE

LCD Liquid Crystal Display

An alphanumeric display using the unique properties of liquid crystal to form characters. The latest flat-panel displays comprise a matrix of hundreds or thousands of individual LCD cells that generate text and colorful graphics on a screen. They consume little power though they do require external lighting to make them legible to the user.

RETURN TO TOP OF THE PAGE

USB or Universal Serial Bus

A smart plug for PC peripherals. USB automatically determines resources (like driver software and bus

bandwidth) required by peripherals. USB makes necessary resources available without user intervention.

USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals.

●

USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example) and a joystick. More and more peripherals for multimedia computers arrive on the market every day. With USB, up to 127 devices can run simultaneously on a computer.

●

USB permits "hot plug-in." There's no need to shut down, plug in, reboot and run set-up to install peripherals. And no need to go through the reverse process to unplug a device.

●

In short, USB transforms today's "Plug-and-Pray" into true Plug-and-Play!

Hub

Glossary

file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (2 of 4) [8/9/2001 11:25:31 AM]

A Universal Serial Bus device that provides additional connections to the Universal Serial Bus. Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub. Hubs

serve to simplify USB connectivity from the user's perspective and provide robustness at low cost and complexity.

Hubs are wiring concentrators and enable the multiple attachment characteristics of USB. Attachment points are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The architecture supports concatenation of multiple hubs.

The upstream port of a hub connects the hub towards the host. Each of the other downstream ports of a hub allows connection to another hub or function. Hubs can detect, attach and detach at each downstream port and enable the distribution of power to downstream devices. Each downstream port can be individually enabled and configured at either full or low speed. The hub isolates low speed ports from full speed signaling.

A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-controlled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host. Hub specific status and control commands permit the host to configure a hub and to monitor and control its ports.

Device

A logical or physical entity that performs a function. The actual entity described depends on the context of the reference. At the lowest level, device may refer to a single hardware component, as in a memory device. At a higher level, it may refer to a collection of hardware components that perform a particular function, such as a Universal Serial Bus interface device. At an even higher level, device may refer to the function performed by an entity attached to the Universal Serial Bus; for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical.

Downstream

The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic.

Glossary

file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (3 of 4) [8/9/2001 11:25:31 AM]

Upstream

The direction of data flow towards the host. An upstream port is the port on a device electrically closest to the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic.

RETURN TO TOP OF THE PAGE

Vertical refresh rate

Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second.

RETURN TO TOP OF THE PAGE

Glossary

file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (4 of 4) [8/9/2001 11:25:31 AM]

Download and Print

Installing your LCD monitor driver • Download and Printing Instructions • Installing FPadjust Program

Installing Your LCD monitor driver

System requirements:

PC running Windows 95, Windows 98, Windows 2000 , Windows Me or later

●

Find your driver ".inf/.icm/.cat" at : /PC/drivers/●

Read the "Driver_install01.txt" file before installing.

This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser.

If you do not have Adobe¨ Acrobat Reader installed, click on the link to install the application. Adobe®

Acrobat Reader for PC / Adobe® Acrobat Reader for Mac.

Download instructions:

To download the file:

1. Click-and-hold your mouse over the icon below. (Win95/98/2000/Me users right-click)

Download

170B2B.pdf

Download

150P2E.pdf

Download

150P2D.pdf

Download

150P2M.pdf

Download

150P2G.pdf

Download and Print

file:///D|/Grace/150P2/english/download/download.htm (1 of 3) [8/9/2001 11:25:33 AM]

Download

150B2B.pdf

2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'.

3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source').

Printing instructions:

To print the manual:

1. With the manual file open, follow your printer's instructions and print the pages you need.

RETURN TO TOP OF THE PAGE

Installing FPadjust Program

The FP Adjust program generates alignment patterns which will help you adjust monitor settings such as CONTRAST, BRIGHTNESS, HORIZONTAL & VERTICAL POSITION, PHASE and CLOCK.

System requirements:

PC running Windows 95, Windows 98, Windows 2000, Winodws Me or later

●

To install FPadjust Program:

Click on the link or icon to install FPadjustment Program.

●

Click-and-hold your mouse over the icon. (Win95/98/2000/Me users right-click)●

Download

FP_setup01.exe

From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'.

●

Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source').

●

Exit your browser and install the FPadjust Program.●

Read the "FP_Readme01.txt" file before installing.

RETURN TO TOP OF THE PAGE

Download and Print

file:///D|/Grace/150P2/english/download/download.htm (2 of 3) [8/9/2001 11:25:33 AM]

+ 59 hidden pages