Rated Average Life in HoursRated Average Life in Hours
BASED ON 3 HOURS PER START
2
Philips Long Life T12 on Programmed Start Ballast
BASED ON 12 HOURS PER START
3
30,000
24,000
Long life, low mercury
Philips T12 Long Life lamps
are environmentally responsible
and offer long life
Ideal for applications where longer relamp cycles would be beneficial
Long life
• Reduce maintenance and recycling costs
• Up to 20% more life on average than a Philips standard
4'T12 34W lamp
Better for the environment
• Only 4.4 mg of mercury with ALTO®LampTechnology
Warranty period: 36 months
1) When compared to a Philips standard 4'T12 34W lamp with 20,000 hours rated average life
(3 hours per start) with 2650 lumens and 62 CRI.
2) Average life under specified test conditions with lamps turned off and restarted no more
frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are
started less frequently.
3) Average life under engineering data with lamps turned off and restarted once every 12
operating hours.
Rated Average Life in HoursRated Average Life in Hours
BASED ON 3 HOURS PER START
1
Philips 800 Series T12 on Programmed Start Ballast
BASED ON 12 HOURS PER START
2
24,000
20,000
High color rendering,
low mercury
Philips 800 Series T12 lamps are
environmentally responsible and
provide excellent color rendering
Ideal for applications where light quality is important
High Color Rendering for more vibrant colors
High lumen output
• Approximate initial lumens include 2800 for the 34W;
3200 for the 40W
• Lumen maintenance: 95% (40W), 93% (34W)
Better for the environment
• Only 4.4 mg of mercury with ALTO®Lamp Technology
Available in 34W and 40W
Warranty period: 30 months
1) Average life under specified test conditions with lamps turned off and restarted no more
frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are
started less frequently.
2) Average life under engineering data with lamps turned off and restarted once every 12
operating hours.
Rated Average Life in HoursRated Average Life in Hours
BASED ON 3 HOURS PER START
2
Philips AdvantageT12 on Programmed Star tBallast
BASED ON 12 HOURS PER START
3
30,000
24,000
Long life, high
performance, and
low mercury
Philips Advantage T12 lamps are
environmentally responsible and
high performing
Ideal for applications requiring maximum quality light output
High performance
• High initial lumens (12% more, on average, compared to the
Philips 800 SeriesT12)—3100 for the 34W; 3600 for the 40W
• 95% lumen maintenance
Long life
• Reduce maintenance and recycling costs
• Up to 20% more life on average than a Philips standard
34W and 40W T12 lamp respectively
High color rendering for more vibrant colors
Better for the environment
• Only 4.4 mg of mercury with ALTO
Warranty period: 36 months
1) When compared to a Philips standard 4'T12 34W lamp with 20,000 hours rated average life
(3 hours per start) with 2650 lumens and 62 CRI or 4'T12 40W lamp with 20,000 hour s
rated average life (3 hours per star t) with 3200 lumens and 82 CRI.
2) Average life under specified test conditions with lamps turned off and restarted no more
frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are
started less frequently.
3) Average life under engineering data with lamps turned off and restarted once every 12
operating hours.
See page 7 for ordering information.
1
®
LampTechnology
Rated Average Life
Philips Advantage T12 Lamps
6 Upgrade to a high performing T12 lamp
Page 7
ProductOrderingNomPackageTempLengthAvg.LifeInitialDesignLumen
Number CodeWattsQty.(Kelvin)(In.)(Hrs.)
1) Average life under specified test conditions with lamps turned off and restarted no more frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are started less frequently.
2) Approximate initial lumens.The lamp lumen output is based upon lamp performance after 100 hours of operating life,when the output is measured during operation on a reference ballast under standard
laboratory conditions.For expected lamp lumen output, commercial ballast manufacturers can advise the appropriate ballast factor for each of their ballasts when they are informed of the designated lamp.
The ballast factor is a multiplier applied to the designated lamp lumen output.
3) Design lumens are the approximate lamp lumen output at 40% of the lamp’s rated average life. This output is based upon measurements obtained during lamp operation on a reference
ballast under standard laboratory conditions.
† This lamp is better for the environment because of its
reduced mercury content.All PhilipsALTO
end-of-life options which can simplify and reduce your lamp
disposal costs depending on your state and local regulations.
®
lamps give you
Upgrade to a high performing T12 lamp 7
Page 8
Philips Lighting Company
200 Franklin Square Drive
P.O. Box 6800
Somerset, NJ 08875-6800
1-800-555-0050
A Division of Philips Electronics North America Corporation
All rights reserved. Reproduction in whole or part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any
license under patent or other industrial or intellectual property rights.
08/07P-5769-B
Printed on chlorine free paper from Sappi Fine Paper mills, who are accredited with EMAS environmental certification.
Sappi claims that the pulp used in the manufacture of Magno Dull paper is derived from environmentally certified forests.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.