Philips 128MB-SPORT AUDIO PLAYER PSA200 - Firmware Upgrade Readme File Firmware Upgrade Manual

PSA200 Firmware upgrade procedure

1. Download the zip file from the site. Then unzip the file into a temp folder on your
computer.

2. At Start->Programs->Nike->psa200, select and launch “Upgrader”.

3. When the user starts the Upgrader with no device connected, the following screen
is seen with the

Start

button disabled.

• The

Start

button is enabled only when the correct device is connected

• Click on the”…” button to browse and select the unzipped firmware file to be

loaded into the device and then click open

- Place a fresh battery to the set and connected to the PC

• The user is informed that the device will be upgraded with the new firmware.

On pressing OK, the firmware is loaded.

• Disconnect the device so that the device upgrades to the new firmware

-Press the play key and the LCD display shows :” FUpgrade”

-Wait until the set switch off automatically.

-The set is then upgraded.