10BDL4551T
V1.00
www.philips.com/welcome
User Manual (English)
10BDL4551T
Safety Instructions
Safety precautions and maintenance
This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read this user
manual before you use your monitor. It contains important information and notes regarding operating your
monitor. The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or cash receipt,
indicating the date of purchase, dealers name and model and production number of the product.
WARNING: Use of controls, adjustments or procedures other than those specied in this documentation may
result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your display:
Operation:
• Keep the display out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• When turning o the display by detaching the power cord or DC power cord, wait 6 seconds before re-attaching the power
cord or DC power cord for normal operation.
• Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your
local service center.
• Do not subject the display to severe vibration or high impact conditions during operation.
• Do not knock or drop the display during operation or transportation.
Maintenance:
• To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display,
grasp the frame to lift; do not lift the display by placing your hand or ngers on the LCD panel.
• Unplug the display if you are not going to use it for an extensive period of time.
• Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the
power is o. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
• To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively
moist environment.
• If your display becomes wet, wipe it with dry cloth as soon as possible.
• If a foreign substance or water gets in your display, turn the power o immediately and disconnect the power cord. Then
remove the foreign substance or water, and send the unit to the maintenance center.
• Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the
display in a location that falls within the following temperature and humidity ranges.
- Temperature: 0-40°C 32-104°F
- Humidity: 10-85% RH
IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a
periodic screen refresh application if the unit will display unchanging static content. Uninterrupted display of still or static
images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. This is
a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will
disappear gradually over a period of time after the power has been switched o.
ii
10BDL4551T
WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. This is also
not covered under the terms of your warranty.
Service:
• The casing cover should be opened only by qualied service personnel.
• If there is any need for repair or integration, please contact your local service center.
• Do not leave your display under direct sunlight.
If your display does not operate normally, having followed the instructions set out in this document, please
contact a technician or your local service center.
Read and follow these instructions when connecting and using your display:
• Unplug the display if you are not going to use it for an extensive period of time.
• Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry
cloth when the power is o. However, never use alcohol, solvents or ammonia-based liquids.
• Consult a service technician if the display does not operate normally when you have followed the instructions
in this manual.
• The casing cover should be opened only by qualied service personnel.
• Keep the display out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
• When turning o the display by detaching the power cable or DC power cord, wait for 6 seconds before reattaching the power cable or DC power cord for normal operation..
• To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive
moisture.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast
remains on the screen for an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the
front of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in LCD
technology. In most cases the afterimage will disappear gradually over a period of time after the power has
been switched o. Be aware that the after-image symptom cannot be repaired and is not covered under
warranty.
EU Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/
EU), and Radio Equipment Directive (2014/53/EU).
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these
harmonized standards published under Directives of Ocial Journal of the European Union.
Radio Equipment Directive (2014/53/EU): EN60950-1/EN62311/EN300328/EN301489
ESD Warnings
When user close to the monitor may cause the equipment discharge and reboot to the display of main menu.
Warning:
This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio
interference.
Federal Communications Commission (FCC) Notice (U.S. Only)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
iii
10BDL4551T
Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device.
To prevent damage which may result in re or shock hazard, do not expose this appliance to rain or excessive moisture.
USA:
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Envision Peripherals Inc.
490 N McCarthy Blvd, Suite #120
Milpitas, CA 95035
USA
Radiation Exposure Statement:
This equipment complies with FCC/CE-RED radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
The suitable temperature for the Color Monitor and accessories is 0℃-45℃.
Adaptor with ferrite must be used with this equipment to ensure compliance with the Class A FCC limits.
Power Adapter information:
Model No.: ADS-26SGP-12 12024E
INPUT: 100-240V~50/60Hz 0.6A
OUTPUT: 12Vdc 2.0A
iv
Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households
This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing
used electrical and electronic appliances, this product may not be disposed of with normal household waste. You
are responsible for disposal of this equipment through a designated waste electrical and electronic equipment
collection. To determine the locations for dropping o such waste electrical and electronic, contact your local
government oce, the waste disposal organization that serves your household or the store at which you purchased
the product.
Attention users in United States:
Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling information, contact:
www.mygreenelectronics.com or www.eiae.org.
End of Life Directives-Recycling
Your new Public Information Display contains several materials that can be recycled for new users.
Please dispose of according to all Local, State, and Federal laws.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
10BDL4551T
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type
Wait one-half hour after switching o before handling parts
- Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium
battery types);
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage
of flammable liquid or gas;
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
v
10BDL4551T
NOTICE
SOFTWARE END USER LICENSE AGREEMENT
THIS SOFTWARE END USER LICENSE AGREEMENT (THIS “AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN
YOU (EITHER AN INDIVIDUAL OR ENTITY) AND MMD MONITORS & DISPLAYS NEDERLAND B.V., A DUTCH LIMITED LIABILITY
COMPANY, WITH ITS PRINCIPAL OFFICE AT PRINS BERNHARDPLEIN 200, 1097 JB AMSTERDAM, THE NETHERLANDS AND
ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY "MMD"). THIS AGREEMENT GIVES YOU THE RIGHT TO USE
CERTAIN SOFTWARE (THE “SOFTWARE”) INCLUDING USER DOCUMENTATION IN ELECTRONIC FORM WHICH MAY HAVE
BEEN PROVIDED SEPARATELY OR TOGETHER WITH A MMD PRODUCT (THE DEVICE”). BY DOWNLOADING, INSTALLING OR
OTHERWISE USING THE SOFTWARE, YOU ACCEPT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS
OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL
OR OTHERWISE USE THE SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN TANGIBLE MEDIA E.G. CD WITHOUT THE
OPPORTUNITY TO REVIEW THIS LICENSE AND DO NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A FULL REFUND OF THE
AMOUNT, IF ANY, THAT YOU PAID FOR THE SOFTWARE IF YOU RETURN THE SOFTWARE UNUSED WITH PROOF OF PAYMENT
WITHIN 30 DAYS FROM THE DATE OF PURCHASE.
1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license to install and use,
on the Device, one (1) copy of the specified version of the Software in object code format as set out in the user documentation
solely for your personal use. The Software is "in use" when it is loaded into the temporary or permanent memory (i.e. RAM,
hard disk, etc.) of the Device.
2. Ownership. The Software is licensed and not sold to you. This Agreement grants you only the right to use the Software, but
you do not acquire any rights, express or implied, in the Software other than those specified in this Agreement. MMD and its
licensors retain all right, title, and interest in and to the Software, including all patents, copyrights, trade secrets, and other
intellectual property rights incorporated therein. The Software is protected by copyright laws, international treaty provisions,
and other intellectual property laws. Therefore, other than as expressly set forth herein, you may not copy the Software without
prior written authorization of MMD, except that you may make one (1) copy of the Software for your back-up purposes only. You
may not copy any printed materials accompanying the Software, nor print more than one (1) copy of any user documentation
provided in electronic form, except that you may make one (1) copy of such printed materials for your back-up purposes only.
3. License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign, loan, or
otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse engineer, decompile, or
disassemble the Software, except to the extent that applicable law expressly prohibits the foregoing restriction. You may not
remove or destroy any product identification, copyright notices, or other proprietary markings or restrictions from the Software.
All titles, trademarks, and copyright and restricted rights notices shall be reproduced on your back up copy of the Software. You
may not modify or adapt the Software, merge the Software into another program or create derivative works based upon the
Software.
4. Disclaimer. THE SOFTWARE IS DESIGNED TO ASSIST YOU IN TRANSFERRING MATERIAL IN WHICH YOU OWN THE
COPYRIGHT OR HAVE OBTAINED PERMISSION TO GRAB AND TRANSFER FROM THE COPYRIGHT OWNER. UNLESS YOU OWN
THE COPYRIGHT OR HAVE PERMISSION TO GRAB AND TRANSFER FROM THE COPYRIGHT OWNER, YOU MAY BE VIOLATING
COPYRIGHT LAW AND BE SUBJECT TO PAYMENT OF DAMAGES AND OTHER REMEDIES. IF YOU ARE UNCERTAIN ABOUT
YOUR RIGHTS, YOU SHOULD CONTACT YOUR LEGAL ADVISOR. YOU ASSUME FULL RESPONSIBILITY FOR THE LEGAL AND
RESPONSIBLE USE OF THE SOFTWARE
5. Open Source Software. (a) This software may contain components that are subject to open-source terms, as stated in the
documentation accompanying the Device. This Agreement does not apply to this software as such. (b) Your license rights under
this Agreement do not include any right or license to use, distribute or create derivative works of the Software in any manner
that would subject the Software to Open Source Terms. "Open Source Terms" means the terms of any license that directly or
indirectly (1) create, or purport to create, obligations for MMD with respect to the Software and/or derivative works thereof; or
(2) grant, or purport to grant, to any third party any rights or immunities under intellectual property or proprietary rights in the
Software or derivative works thereof.
6. Termination. This Agreement shall be effective upon installation or first use of the Software and shall terminate (i) at the
discretion of MMD, due to your failure to comply with any term of this Agreement; or (ii) upon destruction of all copies of
the Software and related materials provided to you by MMD hereunder. MMD’s rights and your obligations shall survive the
termination of this Agreement.
7. Upgrades. MMD may, at its sole option, make upgrades to the Software available by general posting on a website or by any
other means or methods. Such upgrades may be made available pursuant to the terms of this Agreement or the release of such
upgrades to you may be subject to your acceptance of another agreement.
8. Support Services. MMD is not obligated to provide technical or other support (“Support Services”) for the Software. If MMD
does provide you with Support Services, these will be governed by separate terms to be agreed between you and MMD.
9. Limited Software Warranty. MMD provides the Software ‘as is’ and without any warranty except that the Software will
perform substantially in accordance with the documentation accompanying the Software for a period of one year after your
first download, installation or use of the Software, whichever occurs first. MMD’s entire liability and your exclusive remedy
for breach of this warranty shall be, at MMD’s option, either (i) return of the price paid by you for the Software (if any); or (ii)
repair or replacement of the Software that does not meet the warranty set forth herein and that is returned to MMD with a copy
vi
10BDL4551T
of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or
wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty
(30) days, whichever is longer. This limited warranty shall not apply to you if the Software was provided to you free of charge on
an evaluation only basis.
10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, MMD AND ITS LICENSORS DO NOT WARRANT THAT THE
SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET YOUR REQUIREMENTS. YOU ASSUME ALL
RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE INSTALLATION
OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
MMD AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND ACCURACY
OR COMPLETENESS OF RESULTS WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO
WARRANTY AGAINST INFRINGEMENT. MMD DOES NOT WARRANT THAT YOU WILL BE ABLE TO DOWNLOAD, COPY, STORE,
DISPLAY, TRANSFER, AND/OR PLAY SECURE CONTENT.
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL MMD OR ITS LICENSORS BE LIABLE FOR ANY
CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF
DATA, LOSS OF USE OR OTHER PECUNIARY LOSS, EVEN IF MMD OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. IN NO EVENT SHALL MMD’S OR ITS LICENSORS’ AGGREGATE LIABILITY FOR DAMAGES ARISING OUT
OF THIS AGREEMENT EXCEED THE GREATER OF THE PRICE ACTUALLY PAID BY YOU FOR THE SOFTWARE OR FIVE POUNDS
STERLING (5.00).
12. Trademarks. Certain of the product and MMD names used in this Agreement, the Software, and the printed user
documentation may constitute trademarks of the MMD, its licensors or other third parties. You are not authorized to use any
such trademarks.
13. Export Administration. You agree that you will not directly or indirectly, export or re-export the Software to any country for
which the United States Export Administration Act, or any similar United States law or regulation requires an export license or
other U.S. Government approval, unless the appropriate export license or approval has first been obtained. By downloading or
installing the Software you agree to abide by this Export provision.
14. Governing law. This Agreement is governed by the laws of the Netherlands, without reference to its conflict of laws
principles. This Agreement shall not be governed by the United Nations Convention on Contracts for the International Sale of
Goods, the application of which is expressly excluded. Any dispute between you and MMD regarding this Agreement shall be
subject to the non-exclusive jurisdiction of the courts of the Netherlands. If for any reason a court of competent jurisdiction
finds any provision, or portion thereof, to be unenforceable, the remainder of this Agreement shall continue in full force and
effect.
15. General. This Agreement contains the entire agreement between you and MMD and supersedes any prior representation,
undertaking or other communication or advertising with respect to the Software and user documentation. If any part of this
Agreement is held invalid, the remainder of this Agreement will continue in full force and effect. This Agreement shall not
prejudice the statutory rights of any party dealing as a consumer.
vii
10BDL4551T
Table Of Contents
1. Unpacking and Installation ........................................ 1
1.1. Package Contents ............................................. 1
1.2. Installation .........................................................2
2. Physical view and features ...................................... 5
2.1. Front View ........................................................5
2.2. Top View ........................................................... 5
2.3. Rear View ........................................................... 6
2.4. IO Port ................................................................ 7
3. Cleaning and Troubleshooting .................................8
3.1. Cleaning .............................................................8
3.2. Troubleshooting ............................................... 8
4. Technical Data .............................................................9
4.1. Specications ...................................................9
4.2. Disclaimer ....................................................... 10
5. Operation ................................................................... 10
5.1. Setup wizard ................................................... 10
5.1.1. Setup wizard ow: ........................... 10
5.1.2. Welcome ..............................................11
5.1.3. Security Setting ...................................11
5.1.4. Signage Display Settings ...................11
5.1.5. Network Setting .................................12
5.1.6. Clone Media Files into internal ......12
5.1.7. Setup Complete ................................. 12
5.2. Android Launcher ........................................... 13
5.2.1. Platform launcher ..............................13
5.2.2. Admin mode: ......................................13
5.3. Setting menu ....................................................15
5.3.1. Network & Internet ............................15
5.3.2. Signage Display ..................................17
5.3.3. Apps ....................................................22
5.3.4. Display ................................................ 22
5.3.5. Sound .................................................. 23
5.3.6. Security ...............................................23
5.3.7. System ................................................23
5.3.8. Appendix ............................................24
viii
1. Unpacking and Installation
Before installing the display
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• After opening the carton, ensure that the contents are complete and in good condition.
1.1. Package Contents
Please verify that you received the following items with your package content:
• Colour Monitor
• Quick start guide
• USB cable
• HDMI cable
• Silicon Foot
• Stand Bar
• DC Power adapter
• Power Plug
Colour Monitor Quick Start Guide USB Cable
10BDL4551T
HDMI Cable
DC Power Adapter
* Items may dier in dierent locations
* Display design and accessories may dier from the images shown.
Silicon Foot Stand Bar
for US for EU for UK
Power Plug
(Provided by regions)
1
10BDL4551T
1.2. Installation
Securing the power and network cable
1. Insert power plug
2. Securing Micro SD card: Insert SD card bracket
Installing the table stand
Simply screw the supplied table stand onto the stand screw hole.
Landscape Portrait
2
10BDL4551T
Mounting and installation
Mounting Option 1: [VESA mount]
Supporting VESA standard: VESA MIS-D75 (75*75mm)
Supporting screw: M4*4mm (exclude the mounting plate thickness)
The equipment and its associated mounting facilities still remain secure during the test. Use only the UL listed VESA mount with
a minimum weight/load of the weight of the unit without base.
* Installation height: <2 m
3
Loading...