Philips 10BDL3051T User Guide

PHILIPS 10BDL3051T

V1.01

User Manual (English)

Safety Instructions

This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read
this user manual before you use your monitor. It contains important information and notes
regarding operating your monitor. The Philips guarantee applies provided the product is handled
properly for its intended use, in accordance with its operating instructions and upon presentation
of the original invoice or cash receipt, indicating the date of purchase, dealers name and model and
production number of the product.

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may
result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these
instructions when connecting and using your computer monitor.

Operation

• Keep the monitor out of direct sunlight and away from stoves or any other heat source.

• Remove any object that could fall into ventilation holes or prevent proper cooling of the
monitor’s electronics.

• Do not block the ventilation holes on the cabinet.

• When positioning the monitor, make sure the power plug and outlet are easily accessible.

• If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds

before attaching the power cable or DC power cord for normal operation.

• Please use approved power cord provided by Philips all the time. If your power cord is missing,
please contact with your local service center. (Please refer to Customer Care Consumer Information
Center)

• Do not subject the monitor to severe vibration or high impact conditions during operation.

• Do not knock or drop the monitor during operation or transportation

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the LCD panel.
When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or
fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with
a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or
ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain,
water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immediately and
disconnect the power cord. Then, remove the foreign substance or water, and send it to the
maintenance center.

Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer lifetime, please
use the monitor in a location that falls within the following temperature and humidity ranges.

Temperature: 0-40°C 32-95°F

Humidity: 10-85% RH

IMPORTANT:

Always activate a moving screen saver program when you leave your monitor unattended.
Always activate a periodic screen refresh application if your monitor will monitor unchanging static

content. Uninterrupted monitor of still or static images over an extended period may cause “burn

in”, also known as“after-imaging” or “ghost imaging”, on your screen. “Burn-in”, “after-imaging”,

or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the

“burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time
after the power has been switched off.

Warning

Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be
repaired. The damage mentioned above is not covered under your warranty.

Service

* The casing cover should be opened only by qualified service personnel.
* If there is any need for any document for repair or integration, please contact with your local

service center. (Please refer to the chapter of “Consumer Information Center”)

* For transportation information, please refer to “Technical Specifications”.
* Do not leave your monitor in a car/trunk under direct sun light.

Note

Consult a service technician if the monitor does not operate normally, or you are not sure what
procedure to take when the operating instructions given in this manual have been followed.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the Radio Equipment Directive
(2014/53/EU). The following test methods have been applied in order to prove presumption of
conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU):

- EN60950-1

Safety of information Technology Equipment

- EN62311

Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0HZ-300GHz)

-EN 300328(For 802.11b/g/n)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2.4GHz ISM band and using spread spectrum
modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the
R&TTE Directive.

-EN301489-17

Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4GHz wideband
transmission systems and 5GHz high performance RLAN equipment

-EN301489-1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility

NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

(EMC) standard for radio equipment and services; Part 1: Common technical requirements

This product has been tested and found to comply with the harmonized standards for information
Technology Equipment, these harmonized standards published under Directives of Official Journal
of the European Union.

Warning:

This equipment is compliant with Class A of EN55032. In a residential environment this equipment
may cause radio interference.

ESD Warnings:

When user close to the monitor may cause the equipment discharge and reboot to monitor of main
menu.

Federal Communications Commission (FCC) Notice (U.S. Only)

Use only an RF shielded cable that was supplied with the monitor when connecting this monitor to a computer
device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive
moisture.

USA:

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/panel PC technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.

Canada:

Correct Disposal of this product. This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.

Your new Public Information Monitor contains several materials that can be recycled for new users.
Please dispose of according to all Local, State, and Federal laws.

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.

FCC, IC& CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC, IC& CE’s RF
exposure guidelines, place the product at least 20cm from nearby persons.
Le présent document IC, FCC brouilleur fixaient un rayonnement incontrôlée. Installation et mise en œuvre de ce
matériel devrait avec échangeur distance minimale entre 20cm & ton corps.

The suitable temperature for the Colour Monitor and accessories is 0℃-45℃.
Adaptor with ferrite must be used with this equipment to ensure compliance with the Class A FCC limits.
Power Adapter information:
Model No.: KSASB0241200150D5
INPUT: 100-240V~50/60Hz 0.6A
OUTPUT: 12V 1.5A

Waste Electrical and Electronic Equipment-WEEE

Attention users in European Union private households

Attention users in United States:

Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling information, contact
www.mygreenelectronics.com or www. eiae.org.

End of Life Directives-Recycling

NOTICE

SOFTWARE END USER LICENSE AGREEMENT

THIS SOFTWARE END USER LICENSE AGREEMENT (THIS “AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT

BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND MMD MONITORS & DISPLAYS NEDERLAND B.V., A
DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT PRINS BERNHARDPLEIN 200, 1097 JB
AMSTERDAM, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY "MMD").

THIS AGREEMENT GIVES YOU THE RIGHT TO USE CERTAIN SOFTWARE (THE “SOFTWARE”) INCLUDING USER

DOCUMENTATION IN ELECTRONIC FORM WHICH MAY HAVE BEEN PROVIDED SEPARATELY OR TOGETHER WITH A

MMD PRODUCT (THE DEVICE”). BY DOWNLOADING, INSTALLING OR OTHERWISE USING THE SOFTWARE, YOU

ACCEPT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO
NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL OR OTHERWISE USE THE
SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN TANGIBLE MEDIA E.G. CD WITHOUT THE OPPORTUNITY TO
REVIEW THIS LICENSE AND DO NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A FULL REFUND OF THE AMOUNT,
IF ANY, THAT YOU PAID FOR THE SOFTWARE IF YOU RETURN THE SOFTWARE UNUSED WITH PROOF OF
PAYMENT WITHIN 30 DAYS FROM THE DATE OF PURCHASE.

1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license to

install and use, on the Device, one (1) copy of the specified version of the Software in object code format as set
out in the user documentation solely for your personal use. The Software is "in use" when it is loaded into the
temporary or permanent memory (i.e. RAM, hard disk, etc.) of the Device.

2. Ownership. The Software is licensed and not sold to you. This Agreement grants you only the right to use the
Software, but you do not acquire any rights, express or implied, in the Software other than those specified in this
Agreement. MMD and its licensors retain all right, title, and interest in and to the Software, including all patents,
copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is protected by
copyright laws, international treaty provisions, and other intellectual property laws. Therefore, other than as
expressly set forth herein, you may not copy the Software without prior written authorization of MMD, except
that you may make one (1) copy of the Software for your back-up purposes only. You may not copy any printed
materials accompanying the Software, nor print more than one (1) copy of any user documentation provided in
electronic form, except that you may make one (1) copy of such printed materials for your back-up purposes only.

3. License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign,
loan, or otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse
engineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits the
foregoing restriction. You may not remove or destroy any product identification, copyright notices, or other
proprietary markings or restrictions from the Software. All titles, trademarks, and copyright and restricted rights
notices shall be reproduced on your back up copy of the Software. You may not modify or adapt the Software,
merge the Software into another program or create derivative works based upon the Software.

4. Disclaimer. THE SOFTWARE IS DESIGNED TO ASSIST YOU IN TRANSFERRING MATERIAL IN WHICH YOU OWN THE
COPYRIGHT OR HAVE OBTAINED PERMISSION TO GRAB AND TRANSFER FROM THE COPYRIGHT OWNER. UNLESS
YOU OWN THE COPYRIGHT OR HAVE PERMISSION TO GRAB AND TRANSFER FROM THE COPYRIGHT OWNER, YOU
MAY BE VIOLATING COPYRIGHT LAW AND BE SUBJECT TO PAYMENT OF DAMAGES AND OTHER REMEDIES. IF YOU
ARE UNCERTAIN ABOUT YOUR RIGHTS, YOU SHOULD CONTACT YOUR LEGAL ADVISOR. YOU ASSUME FULL
RESPONSIBILITY FOR THE LEGAL AND RESPONSIBLE USE OF THE SOFTWARE

5. Open Source Software. (a) This software may contain components that are subject to open-source terms, as
stated in the documentation accompanying the Device. This Agreement does not apply to this software as such. (b)
Your license rights under this Agreement do not include any right or license to use, distribute or create derivative
works of the Software in any manner that would subject the Software to Open Source Terms. "Open Source
Terms" means the terms of any license that directly or indirectly (1) create, or purport to create, obligations for
MMD with respect to the Software and/or derivative works thereof; or (2) grant, or purport to grant, to any third
party any rights or immunities under intellectual property or proprietary rights in the Software or derivative works
thereof.

6. Termination. This Agreement shall be effective upon installation or first use of the Software and shall
terminate (i) at the discretion of MMD, due to your failure to comply with any term of this Agreement; or (ii) upon

destruction of all copies of the Software and related materials provided to you by MMD hereunder. MMD’s rights

and your obligations shall survive the termination of this Agreement.

7. Upgrades. MMD may, at its sole option, make upgrades to the Software available by general posting on a
website or by any other means or methods. Such upgrades may be made available pursuant to the terms of this
Agreement or the release of such upgrades to you may be subject to your acceptance of another agreement.

8. Support Services. MMD is not obligated to provide technical or other support (“Support Services”) for the
Software. If MMD does provide you with Support Services, these will be governed by separate terms to be agreed
between you and MMD.

9. Limited Software Warranty. MMD provides the Software ‘as is’ and without any warranty except that the

Software will perform substantially in accordance with the documentation accompanying the Software for a
period of one year after your first download, installation or use of the Software, whichever occurs first. MMD’s

entire liability and your exclusive remedy for breach of this warranty shall be, at MMD’s option, either (i) return of

the price paid by you for the Software (if any); or (ii) repair or replacement of the Software that does not meet the
warranty set forth herein and that is returned to MMD with a copy of your receipt. This limited warranty shall be
void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any
replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days,
whichever is longer. This limited warranty shall not apply to you if the Software was provided to you free of charge
on an evaluation only basis.

10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, MMD AND ITS LICENSORS DO NOT WARRANT THAT
THE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET YOUR REQUIREMENTS. YOU
ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND
FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, MMD AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS,
WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND ACCURACY OR COMPLETENESS OF RESULTS WITH
RESPECT TO THE SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO WARRANTY AGAINST
INFRINGEMENT. MMD DOES NOT WARRANT THAT YOU WILL BE ABLE TO DOWNLOAD, COPY, STORE, DISPLAY,
TRANSFER, AND/OR PLAY SECURE CONTENT.

11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL MMD OR ITS LICENSORS BE LIABLE FOR ANY
CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER, INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY LOSS, EVEN IF MMD OR ITS LICENSORS HAVE

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL MMD’S OR ITS LICENSORS’

AGGREGATE LIABILITY FOR DAMAGES ARISING OUT OF THIS AGREEMENT EXCEED THE GREATER OF THE PRICE
ACTUALLY PAID BY YOU FOR THE SOFTWARE OR FIVE POUNDS STERLING (5.00).

12. Trademarks. Certain of the product and MMD names used in this Agreement, the Software, and the printed
user documentation may constitute trademarks of the MMD, its licensors or other third parties. You are not
authorized to use any such trademarks.

13. Export Administration. You agree that you will not directly or indirectly, export or re-export the Software to
any country for which the United States Export Administration Act, or any similar United States law or regulation
requires an export license or other U.S. Government approval, unless the appropriate export license or approval
has first been obtained. By downloading or installing the Software you agree to abide by this Export provision.

14. Governing law. This Agreement is governed by the laws of the Netherlands, without reference to its conflict
of laws principles. This Agreement shall not be governed by the United Nations Convention on Contracts for the
International Sale of Goods, the application of which is expressly excluded. Any dispute between you and MMD
regarding this Agreement shall be subject to the non-exclusive jurisdiction of the courts of the Netherlands. If for
any reason a court of competent jurisdiction finds any provision, or portion thereof, to be unenforceable, the
remainder of this Agreement shall continue in full force and effect.

15. General. This Agreement contains the entire agreement between you and MMD and supersedes any prior
representation, undertaking or other communication or advertising with respect to the Software and user
documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue in
full force and effect. This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.

Open source licenses statement

Disclaimer regarding services and/or software offered by third parties

Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice.
MMD does not bear any responsibility in these sorts of situations.

Third Party (Open) Source Software

This product may make use of third party (open) source software and the use of this third party (open) source
software may be subject to terms and conditions of such third party. In case open source software is used, MMD
provides source attribution, where applicable. When required by the terms of the open source license, MMD
published the relevant parts of the source code for the product on http://licenses.cmnd.io. MMD hereby offers to
deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source
packages used in this product for which such offer is requested by the respective license. This offer is valid up to
three years after product purchase to anyone in receipt of this information. To obtain the source code, please
write in English to [e-mail]

You can find the detailed information in Android OSD.
Step 1:

Step:2:

Step 3:

Contents

1.Unpacking and Introduction .................................................................................................................................... 1

1.1. Unpacking .................................................................................................................................................. 1

1.2. Package contents ...................................................................................................................................... 1

1.3. Installation ................................................................................................................................................ 1

2 Physical view and features ...................................................................................................................................... 3

2.1 Front View .................................................................................................................................................. 3

2.2 Top View ...................................................................................................................................................... 3

2.3 Rear View .................................................................................................................................................... 4

2.4 IO Port ......................................................................................................................................................... 5

3. Cleaning and Troubleshooting ................................................................................................................................ 6

3.1. Cleaning ..................................................................................................................................................... 6

3.2 Troubleshooting ........................................................................................................................................ 6

4. Technical Data ......................................................................................................................................................... 6

4.1 Specifications ............................................................................................................................................. 6

4.2. Disclaimer.................................................................................................................................................. 8

5. Operation ................................................................................................................................................................ 8

5.1 Setup wizard .............................................................................................................................................. 8

5.1.1 Setup wizard flow: ......................................................................................................................... 8

5.1.2 Welcome .......................................................................................................................................... 9

5.1.3 Network Setting .............................................................................................................................. 9

5.1.4 Signage Display Settings ............................................................................................................. 10

5.1.5 Clone Media Files into internal ................................................................................................. 11

5.1.6 Setup Complete............................................................................................................................. 11

5.2 Android Launcher ................................................................................................................................... 11

5.2.1. Platform launcher ....................................................................................................................... 11

5.2.2. Admin mode: ................................................................................................................................ 11

5.3 Setting menu ............................................................................................................................................ 12

5.3.1 Setting ............................................................................................................................................ 12

5.3.2 Wi-Fi ............................................................................................................................................... 13

5.3.3 Ethernet ......................................................................................................................................... 13

5.3.4 Bluetooth ....................................................................................................................................... 14

5.3.5 More................................................................................................................................................ 14

5.3.6 Signage Display............................................................................................................................. 14

5.3.7 System Tools.................................................................................................................................. 26

5.3.8 Sound .............................................................................................................................................. 28

5.3.9 Display ........................................................................................................................................... 28

5.3.10 HDMI ............................................................................................................................................ 29

5.3.11 Storage ......................................................................................................................................... 29

5.3.12 Apps .............................................................................................................................................. 29

5.3.13 Language ..................................................................................................................................... 30

5.3.14 Date & Time ................................................................................................................................ 30

5.3.15 Developer options ..................................................................................................................... 30

5.3.16 About ............................................................................................................................................ 30

5.3.17 Appendix ..................................................................................................................................... 31

Colour Monitor

Quick Start Guide

USB Cable

HDMI Cable

Silicon

Foot

Stand Bar

DC Power adapter

Power Plug

(Provide by regions)

1. Unpacking and Introduction

1.1. Unpacking

* This product is packed in a carton, together with the standard accessories.

* Any other optional accessories will be packed separately.

* After opening the carton, ensure that the contents are complete and in good condition.

1.2. Package contents

* Differences according to regions.

* Monitar design and accessories may differ from those illustrated above.

1.3. Installation

Securing the power and network cable

1 Insert power plug

2 Securing Micro SD card: Insert SD card bracket

Installing the table stand

1

Step1 Release the back cover screw to release back cover.

Step2 Open the back cover with disassemble tool.

Step3 Separate the back cover from main device.

Step4 Stick the silicon gaskets on back cover.

Step5 Install back cover thread head height not exceed 3mm.

Step6 Route power and network cable from bottom, insert signboard before mount signboard on back cover.

Mounting and installation

Mounting Option 1: [VESA mount] f

Supporting VESA standard: VESA MIS-D75 (75*75mm)

Supporting screw: M4*4mm (exclude the mounting plate thickness)

Mounting Option 2: [Using back cover]

Supporting screw: Self-tapping screw*3pcs(exclude the mounting plate thickness)

Simply screw the supplied table stand onto the stand screw hole.

Landscape Portrait

2

2 Physical view and features

①

②

2.1 Front View

① Front Camera

2M

② RGB LED (Left & Right)

Default: OFF

Use SICP to turn On and set RGB

2.2 Top View

① ② ③ ④

① - ② [Host USB]

Micro USB, Support USB external device.

③ Expansion Port(Reserved)
④ Micro USB

Support ADB data transmission, don't support OTG.

3