Philips 105S59/97, 105S59/91, 105S58/97 User Manual

SAFETY PRECAUTIONS AND MAINTENANCE

Disconnect the monitor from the mains supply if the monitor is not to be used for extended period of time.

Do not attempt to remove the back cover, as you will be exposed to shock hazard. The back cover should only be removed by qualified services personnel.

Do not place objects on top of the monitor cabinet, which could fall into vents or which could cover them and prevent proper cooling of the monitor’s electronic devices.

Do not expose the monitor to rain or excessive moisture to avoid the risk of shock or permanent damage to the set.

Avoid exposing the monitor to direct sunlight, stoves or any other heat sources.

To prevent overheating, make sure that the ventilation openings of the monitor are not covered.

Keep moisture and dust away.

Keep away from any magnetic objects, such as speakers, electric motors, transformers,…etc.

When positioning this monitor, make sure that the mains plug and socket are easily accessible.

Do not use alcohol or ammonia based liquid to clean the monitor. If necessary, clean with a slightly damp cloth. Disconnect the monitor from the mains supply before cleaning.

Consult a service technician if the monitor does not operate normally when operating instructions of this manual are followed.

INTRODUCTION

We would like to thank you for your purchase of this Philips color monitor 105S5. This monitor set can be used with IBM PC and PS/2 computers or compatibles with analog RGB output. It also supports timings of graphics adapters including:

-VGA, SVGA, XGA, 1024X768

Please read this user’s guide carefully to obtain the best performance from your Monitor, and keep this user’s guide for future reference.

FEATURES

 Automatically scan horizontal and vertical frequencies.  Analog input signal provides the capability of unlimited display colors.  Horizontal size/position, vertical size/position and pincushion controls are

adjustable to adapt to a variety of graphics cards.

 Fine phosphor pitch provides greater image clarity.  On-Screen-Display and Digital Control features provide user-friendliness and

easy-to-use when operating the monitor.

ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. IBM, IBM PC and IBM PS/2 are registered trademarks of International Business Machines Corporation. Windows is a registered trademark of Microsoft Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DDC are trademarks of VESA.

INSTALLATION INSTRUCTIONS

CAUTION: Be sure to turn off the AC Power to the monitor before making connections

1. Assemble the tilt/swivel base as shown below.

2. Connect the power cord.

3. Connect the end of the signal cable to the display connector of the computer and tighten

the screws.

CONTROLS AND OPERATION

TILT/SWIVEL BASE Turn the monitor for comfortable viewing angle within 180° horizontally and 20° vertically. (please refer to installation instructions.)

SIGNAL CABLE CONNECTOR (15-pin mini D-SUB) Connect to the display adapter output of a computer having analog video output.

AC INPUT CONNECTOR (Appliance coupler) Connect to AC outlet with supplied power cord.

POWER SWITCH AND INDICATOR Press this switch to turn on the monitor and the indicator will light up. To turn off the monitor, press it again.

USER ADJUSTMENT BUTTONS

 To Display OSD main menu.  Push again to exit from main menu.  To entry the adjustment function.

OSD MENU

POWER MANAGEMENT

BASIC

GEOMETRY

COLOR

LANGUAGE

OTHER

CONTRAST BRIGHTNESS FACTORY RESET ZOOM H-POSITION H-SIZE V-POSITION V-SIZE

PINCUSHION PIN BALANCE TRAPEZOID PARALLEL

9300o K/6500 o K USER

ENGLISH FRENCH SPANISH CHINESE(simple font) CHINESE(complex font)

H.MOIRE V.MOIRE OSD H-POSITION OSD V-POSITION INPUT LEVEL

THIS MONITOR CAN SUPPORT EPA AND NUTEK POWER MANAGEMENT SYSTEMS, INDICATED BY THE LED ON THE FRONT PANEL:

STATE

ACTIVE OFF AMBER

LED COLOR OSD INDICATION

GREEN

-------------- 75W

POWER SAVING

The monitor remains in the power-saving state until you press a key on the keyboard or move the mouse (if available).

INPUT PIN ASSIGNMENT

POWER CONSUMPTION

< 8W

SPECIFICATIONS

Pin No

SIGNAL

Red Video

Green Video

Blue Video

Digital Ground or No Pin

Red Video Return

Green Video Return

Blue Video Return

Digital Ground or No Pin

SDA (DDC1/2B Data)

Horizontal Sync

Vertical Sync

SCL (DDC1/2B Clock)

MODEL

SIZE

DEFLECTION ANGLE

CRT

PHOSPHOR PITCH

RESOLUTION (MAX)

VIDEO BANDWIDTH

SYNCHRONIZATION

INPUT SIGNAL

DISPLAY COLORS

DISPLAY AREA (HXV)

HORIZONTAL

VERTICAL

VIDEO

SYNC

TROUBLE SHOOTING GUIDE

105S5

15” DIAGONAL (14” VIEWABLE)

90 DEGREES

0.28MM

1024X768

75MHz

30~54KHz

50~120Hz

RGB ANALOG 0.7 Vp-p, 1Vp-p/75 Ohms POSITIVE

TTL SEPARATE/COMPOSITE (+/-)

UNLIMITED

270mmX202mm(RECOMMENDED)

Problem

No picture

Picture is unstable

The color of image on screen is abnormal.

Possible Cause

Is the power Cord Connected?

Is the power switch on?

Is the signal cable properly connected?

Is the monitor in the power save mode?

Is the signal cable properly connected?

Is the scanning frequency outside the acceptable range?

Are the pin arrangements of the signal connector correct?

Is there magnetic object nearby?

Are the pin arrangements of the signal connector correct?

Remedy

Connect power cord.

Turn on power switch.

Connect signal cable properly. Check connector for bent pins.

Press any key on the keyboard or move the mouse.

Connect signal cable properly. Check for bent or missing pins.

Reconfigure the graphics board. within the range of the monitor.

Use correct signal cable.

Move the object away.

Use correct signal cable.

* Due to continuous product improvement, the specifications in this manual are subject to change without notice.

Your International Guarantee

Dear Customer,

Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer. The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product. The Philips guarantee may not apply if:

• the documents have been altered in any way or made illegible;

• the model or production number on the product has been altered, deleted, removed or made

illegible;

• repairs or product modifications and alterations have been executed by unauthorized service

organizations or persons;

• damage is caused by accidents including but not limited to lightning, water or fire, misuse or neglect.

Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country. In case your Philips product is not working correctly or is defective, please contact your Philips dealer. In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet. In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting your dealer. If you have questions which your dealer cannot answer or any related question please contact the Philips Consumer Information Centers or via: Website: http://www.philips.com

使用及安全須知:

若顯示器長久不用請與主機斷開連接。

請不要隨意打開顯示器後殼，因會有高壓和其他危險。非授權專業人員，請勿擅自開機修理。

為防止顯示器內部溫度升高，不要阻擋顯示器的通風。(例如：用布蓋在顯示器上，或放置在不通

風的地方。)

顯示器應謹防雨淋和受潮。

請避免顯示器直接暴露于陽光，爐火或其他熱源。

注意防潮和灰塵。

避免顯示器接觸任何磁性物體，如麥克風，電馬達，變壓器等。

放置電腦時，請確認主要的插頭和插座易接觸。

請使用脫酯棉布，不可用力擦拭。

當按照說明書的要求操作後，顯示器仍然不能正常工作，請諮詢我們的技術支持人員。

產品性能簡介：

感謝您使用飛利浦的彩色顯示器105S5。這台顯示器適用於IBM PC 和PS/2電腦或其他類比RGB

輸出的兼容機。他支援以下的圖像解析度：

-VGA, SVGA, XGA, 1024X768

使用前，請仔細閱讀使用說明書並妥善保存以便今後參考。

特點

• 自動水平垂直頻率掃描。

• 類比信號輸入提供無限色彩能力。

• 水平尺寸/位置，垂直尺寸/位置和針墊型控制都可調。

• 優良的磷塗面使圖像更清晰。

• 圖像顯示和數位化的控制特點令使用者在操作時更覺簡單親切。

ENERGY STAR® is a U.S. registered mark.

As an ENERGY STAR® Partner, we have determined that this product meets the

+ 26 hidden pages