Philco phem 1000, phem 1001 Operating Instructions

PHEM 1000 PHEM 1001

Instruction manual Návod k obsluze Návod na obsluhu Instrukcja obsługi Használati útmutató

Dear customer, thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all the instructions in this user's manual.

CONTENTS

PART 1: INTRODUCTION .............................................................................................................................................................3

• Important safety instructions ..............................................................................................................................................3

• Important safety instructions for using electrical equipment ......................................................................................4

• Use in accordance with intended purpose ......................................................................................................................4

PART 2: DESCRIPTION OF THE APPLIANCE ......................................................................................................................5

• Description of the espresso machine................................................................................................................................5

• Description of espresso machine operation ................................................................................................................... 6

PART 3: USING FOR THE FIRST TIME .................................................................................................................................. 7

• Testing and setting water hardness .................................................................................................................................. 7

• Filling the coffee bean hopper............................................................................................................................................7

• Filling the water tank ............................................................................................................................................................ 7

• Inserting the water ﬁ lter .......................................................................................................................................................8

• Controlling the ﬁ neness of ground coffee ........................................................................................................................8

• Using for the ﬁ rst time......................................................................................................................................................... 9

• Turning on the appliance .................................................................................................................................................... 9

• Turning off the appliance ................................................................................................................................................... 10

PART 4: CONTROLS ................................................................................................................................................................... 11

• Presetting the appliance ..................................................................................................................................................... 11

• Brewing coffee by pressing a touch icon ....................................................................................................................... 11

• Quick parameter settings for brewing beverages ........................................................................................................12

• Setting default parameters for the brewed beverages ............................................................................................... 13

• Available coffees and warm beverages .......................................................................................................................... 14

• Brewing beverages ..............................................................................................................................................................15

PART 5: APPLIANCE SETTINGS ............................................................................................................................................ 21

• Beverage settings ................................................................................................................................................................ 21

• Water ﬁ lter ............................................................................................................................................................................25

• Adjusting the water hardness setting ............................................................................................................................26

• Setting the economical ECO mode ...............................................................................................................................26

• Automatic shut-off .............................................................................................................................................................. 27

• Information ...........................................................................................................................................................................28

• Language .............................................................................................................................................................................. 29

• Reset - Factory settings ....................................................................................................................................................29

• Exiting the program settings menu ................................................................................................................................29

PART 6: CLEANING AND MAINTAINING THE APPLIANCE ..........................................................................................30

• Cleaning the espresso machine before use .................................................................................................................30

• Cleaning the brewing unit ................................................................................................................................................30

• Descaling the espresso machine ..................................................................................................................................... 31

• Cleaning the spent coffee grounds container and the drip tray .............................................................................33

• Cleaning the water tank .................................................................................................................................................... 34

• Cleaning the coffee bean hopper ...................................................................................................................................34

• Unpacking and cleaning the milk frother .....................................................................................................................35

• Cleaning the espresso machine ......................................................................................................................................35

PART 7: WARNING MESSAGES AND TROUBLESHOOTING .......................................................................................36

• Warning messages .............................................................................................................................................................36

• Troubleshooting ................................................................................................................................................................... 37

• Transporting the appliance ...............................................................................................................................................38

PART 8: TECHNICAL INFORMATION ...................................................................................................................................39

PART 1: INTRODUCTION

Important safety instructions

• This appliance may not be used by any persons (including children) with mental disabilities, weak strength or by inexperienced persons, unless they have been properly trained or schooled in the safe use of the appliance, or unless they are properly supervised by a qualiﬁ ed person who is responsible for their safety.

• Children must be supervised to ensure that they do not play with the appliance.

• Read all instructions before putting the espresso machine into operation and store them for future use.

• Before ﬁ rst use, remove all advertising labels and stickers from the espresso machine.

• During operation, set the espresso machine on the edge of the kitchen bench or table. Always use the espresso machine on a dry even surface.

• Do not place the appliance on a hot gas or electric stove or near it or in a location, where it would be in contact with a hot oven.

• Do not use the espresso machine on a metal underlay such as for example a kitchen sink.

• Before connecting the espresso machine to an electric power socket and turning it on, check that it is completely and correctly assembled.

• ATTENTION: Do not use this appliance with a programmable switch, timer switch or any other component that automatically switches on the appliance.

• Do not use accessories that are not designed for use with this appliance.

• Only add clean cold water to the water tank. Do not use any other liquids.

• Do not turn on the espresso machine if there is no water in the water tank.

• If the espresso machine is running, do not leave it unattended.

• Before you start cleaning the espresso machine or before moving it, turn it off and allow it to cool down.

• Do not place any items on the top surface of the espresso machine.

• This appliance generates hot water and can produce water steam during operation. Be careful not to splash yourself with hot water or scald yourself with hot steam.

• Always turn off the espresso machine and disconnect the power plug from the power socket whenever it is left without supervision, after ﬁ nishing using it, before you start cleaning it or before you take it elsewhere, disassemble it, assemble it or before storing it.

• Keep the appliance and its accessories in clean condition. Follow the cleaning instructions provided in this manual.

• Do not start the coffee grinder if the lid is not correctly secured. Be very careful during the grinding process, keeping your ﬁ ngers, hands, hair, clothing and other items at a sufﬁ cient distance from the grinder.

Important safety instructions for using electrical equipment

• Unwind the power cord before using it.

• To prevent injury by electrical shock, do not submerge the power cord, the power plug or the actual appliance in water or any other liquid. Do not bend the power cord over the sharp edge of the working area and do not allow it to touch hot items or allow knots to form.

• Do not use this appliance for a purpose other than that for which it was designed. Do not use it in a moving vehicle or on a boat. Do not use it outdoors.

• We recommend that you regularly inspect the appliance. Do not use the appliance if the power cord, power plug or the actual appliance is damaged in any way whatsoever. If damage has occurred, to avoid a dangerous situation from arising, immediately stop using the appliance and take it to the nearest authorised service centre for inspection, repair or replacement of damaged parts.

• Any maintenance other than cleaning may only be carried out by an authorised service centre.

• In the interest of increased safety, we recommend the installation of a residual current device (protective shut-off switch) when the appliance is used.

• It is appropriate to install the residual current device with a capacity not exceeding 30 mA of residual current into the circuit to which the appliance is connected. Contact a professional electrician.

Use in accordance with intended purpose

Carefully read this user's manual before ﬁ rst using this appliance.

- Not respecting these instructions may result in injury or damage to the appliance. The manufacturer takes no responsibility for damages resulting from not following these instructions.

This appliance is designed for brewing coffee and other hot beverages.

This appliance is designed exclusively for household use only. It is not designed for use in:

• a location used as a staff kitchen in stores, in government ofﬁ ces and other workplaces

• agro-tourism

• in hotels, motels and other accommodation facilities.

• rented rooms

Any other use is considered to be inappropriate and dangerous. The manufacturer takes no responsibility for any damages caused by inappropriate use of the appliance.

NOTE: Store this user's manual. In the event that you hand this appliance over to somebody, also give them this user's manual to use.

WARNING: HOT SURFACE!

PART 2: DESCRIPTION OF THE APPLIANCE

Description of the espresso machine

10.

11.

12.

13.

14.

15.

16.

17.

1. Cover of the coffee bean hopper

2. Lid of the water tank

3. Area for placing empty cups

4. Water tank

5. Coffee grounds container

6. Drip tray

7. Drip tray grill

8. Cover of the ground coffee container

9. Controlling the ﬁ neness of ground coffee

10. Coffee bean hopper

11. Coffee spout

12. Handle

13. Milk hose

14. Milk frother

15. Hot water spout

16. Milk and foamed milk spout

17. Power cord

Description espresso machine operation

10.

1. Espresso icon

2. Long coffee icon (lungo, long coffee)

3. Hot water icon (hot water)

4. Main power switch

5. Display

6. Cappuccino icon

7. Coffee latte icon (caffè latte)

8. Hot milk/cream icon (hot milk/foamed milk)

9. Clean button

10. Dial button

PART 3: USING FOR THE FIRST TIME

Water hardness test

The harder the water is, the more frequently you will need to descale the espresso machine. Hard water also fundamentally affects the ﬁ nal ﬂ avour of the brewed coffee. Test the water hardness before the ﬁ rst use of the espresso machine to ensure maximum protection for your new appliance and to extend its lifetime. You can normally purchase this test at the chemist's or at other specialised stores. As soon as you change your water source, it is necessary to perform another water hardness test. Further instructions regarding water hardness settings based on the water hardness test results are provided in chapter Adjusting the water hardness setting on pg. 26.

Filling the coffee bean hopper

• Never add coffee beans into the coffee bean hopper that have been specially modiﬁ ed (e.g. with sugar, cocoa).

• Only add roasted coffee beans into the coffee bean hopper, never add other foodstuffs such as rice, soya beans, cocoa beans, nuts, sugar and spices.

• Never put hard items into the coffee bean hopper which can irreparably damage the grinder.

• The cover of the coffee bean hopper also functions as a seal and preserves the aroma of the coffee beans. Therefore, always keep the lid ﬁ rmly closed.

• The maximum capacity of the coffee bean hopper is 250 g.

1) Remove the cover of the coffee bean hopper.

2) Pour coffee beans into the hopper.

3) Return the cover of the coffee bean hopper.

Filling the water tank

• Pour only room temperature drinking water into the water tank. Never ﬁ ll the water tank with another liquid (e.g. warm water, hot water, milk). In this way you will prevent possible damage to the espresso machine. To ensure proper coffee ﬂ avour, we recommend using water at a temperature of around 25 °C. Low water temperature will negatively affect the ﬁ nal taste of the brewed coffee.

• To ensure that the coffee is both healthy and tasty, it is necessary to replace the water in the water tank every day.

• Never ﬁ ll the water tank past the MAX level mark.

1) Open the lid of the water tank.

2) Take out the water tank.

3) Fill the water tank with room temperature drinking water, put the water tank back into the espresso machine.

4) Close the lid of the water tank.

Inserting the water ﬁ lter

If you live in an area with hard water exceeding 10°dH, it is recommended to use a water ﬁ lter. You can purchase these ﬁ lter in specialised electrical appliance stores or contact their manufacturer directly. Detailed information about the installation, cleaning and replacement of a water ﬁ lter is provided in the chapter Water ﬁ lter on pg. 25.

Controlling the ﬁ neness of ground coffee

• Set the grinding ﬁ neness for the coffee beans according to the type of coffee bean coffee.

• Only adjust the ﬁ neness of the grind while the grinder is running as this will avoid damaging it.

• We recommend a coarse grind setting for dark-coloured coffee beans.

• We recommend a ﬁ ne grind setting for light-coloured coffee beans.

• If your coffee is ﬂ owing out slowly during the brewing process (or is not ﬂ owing at all), set a coarser grind setting.

• If your coffee is ﬂ owing out too quickly and the colour is too light, set a ﬁ ner grind setting.

NOTE: Setting the ﬁ neness of the grid will show itself only after brewing 2 cups of coffee.

FINE

MEDIUM

COARSE

Using for the ﬁ rst time

• As the espresso machine was tested at the factory, a small amount of ground coffee may still be inside. The actual appliance, however, is brand new.

• When it is ﬁ rst turned on, the automatic cleaning test will be initiated, which will help to achieve optimal operating conditions. It is not possible to skip this step.

• Hot water may drip out of the coffee spout during the cleaning process. Avoid coming into contact with hot water – risk of scalding.

Make sure that the espresso machine is connected to an el. power socket, then press the main power switch.

1) Welcome.

2.) Automatic espresso machine test.

3) The espresso machine is starting to heat up. The heating system will automatically stop when the correct coffee brewing and steam temperature is reached.

4) After heating up, the espresso machine will automatically clean out the brewing unit and both the coffee and hot water spouts (the automatic cleaning system ensures the best possible freshness of the brewed coffee).

5) After the cleaning process is ﬁ nished, the espresso machine is ready for operation.

Turning on the device

• Whenever the espresso machine is turned on, the automatic heating and cleaning process will be performed. It is not possible to stop this process. The espresso machine can only be used after this process has completely ﬁ nished.

• Hot water may drip out of the coffee spout during the cleaning process. Avoid coming into contact with hot water – risk of scalding.

Make sure that the espresso machine is connected to an el. power socket, then press the main power switch.

1) Welcome.

2) The espresso machine is starting to heat up. The heating system will automatically stop when the correct coffee brewing and steam temperature is reached.

3) After heating up, the espresso machine will automatically clean out the brewing unit and drain the coffee and hot water (the automatic cleaning system ensures the best possible freshness of the brewed coffee).

4) The espresso machine is now ready for use. You can start brewing coffee.

Turning off the device

• Whenever the espresso machine is turned off, the automatic cleaning process will be performed. It is not possible to stop this process. This process serves to clean out the internal lines of the espresso machine and to remove the remains of ground coffee.

• Hot water may drip out of the coffee spout during the cleaning process. Avoid coming into contact with hot water – risk of scalding.

Press the main power switch.

1) Cleaning the espresso machine.

2) When the message «GOODBYE» appears on the display it means that the cleaning process was successfully completed and the espresso machine will shut down automatically.

PART 4: OPERATION

Presetting the appliance

Using this espresso machine you will brew a delicious cup of coffee by simply pressing one button. Furthermore, you can select your preferred coffee strength, its volume, the amount of milk and foamed milk or the temperature and volume of the hot water.

• Brewing coffee by pressing a touch icon.

• Quick parameter settings for brewing beverages.

• Setting default parameters for the brewed beverages.

NOTE: Press the dial button to stop the beverage brewing process.

Brewing coffee by pressing a touch icon

If the message «READY» is lit on the display, you can press one touch icon to brew your desired type of coffee.

In the following example, we will show you how to prepare an espresso coffee using the touch icons.

1) Press the espresso icon.

2) As soon as the icon shown in the picture appears on the display, press the dial button. Without further user interaction, an espresso coffee will be prepared with the default parameters.

3) If there is no further user interaction within 10 seconds of pressing the beverage icon, the display will show the message «READY» and the espresso machine will switch back to the main menu.

Quick parameter settings for brewing beverages

When brewing coffee, it is possible to quickly set the 8 parameters listed below.

• Amount of ground coffee for brewing a beverage.

• Volume of the brewed coffee.

• Milk frothing time when brewing a cappuccino.

• Milk heating time when brewing a latte.

• Temperature of the prepared hot water.

• Volume of the prepared hot water.

• Milk heating time when making hot milk.

• Milk heating time when making foamed milk.

The strength or volume of the brewed coffee can be temporarily set before or during the brewing process. This setting will not be stored. Information about changes to the default parameters can be found in chapter Beverage settings.

1) While the coffee is being ground, you can use the dial button to select the amount of ground coffee that will be used for the beverage currently being brewed – adjusting its strength. Turning to the left you will lower the coffee strength to MILD coffee strength to STRONG medium value of NORMAL

, turning to the right you will increase the

. The default coffee strength is set to the

2) While making an espresso, cappuccino, long coffee (lungo) and caffè latte you can set the volume of the brewed coffee using the dial button. If for example the default volume is set to 40 ml, then by turning two steps to the left you will reduce the volume to 35 ml, while turning it by two steps to the right you will increase it to 45 ml.

3) While making a cappuccino it is possible during the milk frothing process to set the time of this frothing using the dial button. If for example the default time is set to 20 seconds, then turning it 2 steps to the left you will shorten the milk frothing time to 19 seconds, while turning it by 2 steps to the right you will extend it to 21 seconds.

4) While making a caffè latte it is possible during the milk heating process to set the heating time using the dial button. If for example the default time is set to 20 seconds, then turning it 2 steps to the left you will shorten the milk heating time to 19 seconds, while turning it by 2 steps to the right you will extend it to 21 seconds.

5) Before heating hot water, its temperature can be adjusted using the dial button. Turn to the left to reduce the temperature to LOW, turn to the right to increase the temperature to HIGH. The default temperature is set to the medium value of NORMAL.

6) While heating hot water, its volume can be adjusted using the dial button. If for example the default volume is set to 150 ml, then by turning two steps to the left you will reduce the volume to 145 ml, while turning it by two steps to the right you will increase it to 155 ml.

7) While making hot milk, its heating time can be adjusted using the dial button. If for example the default time is set to 20 seconds, then turning it 2 steps to the left you will shorten the hot milk heating time to 19 seconds, while turning it by 2 steps to the right you will extend it to 21 seconds.

8) While making foamed milk, its heating time can be adjusted using the dial button. If for example the default time is set to 20 seconds, then turning it 2 steps to the left you will shorten the milk frothing time to 19 seconds, while turning it by 2 steps to the right you will extend it to 21 seconds.

Setting default parameters for the brewed beverages

While heating hot water, its volume can be adjusted using the dial button. If for example the default volume is set to 150 ml, then by turning two steps to the left you will reduce the volume to 145 ml, while turning it by two steps to the right you will increase it to 155 ml. In a similar way it is also possible to change:

• Strength and volume of an espresso.

• Strength and volume of a long coffee.

• Strength and volume of an espresso for brewing a cappuccino and the foamed milk preparation time.

• Strength and volume of an espresso for brewing a caffè latte and the milk and foamed milk preparation time.

• Hot water temperature and volume setting.

• Hot milk preparation time setting.

• Foamed milk preparation time setting.

The following table presents the range of parameters that can be changed for individual types of beverages:

Beverages Temperature Strength Volume Espresso Machine Approx. 80 °C Long coffee /Large coffee

Cappuccino Approx. 70 °C

Coffee latte icon /Caffè latte

Hot water /Hot water Low: approx. 60 °C

Medium: approx. 70 °C

High: approx. 80 °C Hot milk /Hot milk Approx. 40 °C Milk preparation time: 3-120 seconds Hot cream /Foamed milk Approx. 50 °C Foamed milk preparation time of

Weak: Medium: Strong:

Volume: 25-120 ml

Volume: 25-240 ml Milk preparation time: 3-120 seconds Foamed milk preparation time: 3-120 seconds

Volume: 25-450 ml

3-120 seconds

Information about changes to the default parameters can be found in chapter Beverage settings.

Available coffees and warm beverages

Espresso

Coffee beans: Medium roasted Cup temperature: 55 °C Coffee strength: Strong Extraction temperature: 93 °C Coffee volume: 50 ml

Long coffee (Large coffee, Lungo)

Coffee beans: Medium roasted Cup temperature: 55 °C Coffee strength: Medium Extraction temperature: 93 °C Coffee volume: 100 ml

Hot water (Hot water)

High temperature: For brewing black / green tea Normal temperature: For direct consumption Low temperature: For making instant beverages or dried milk.

Cappuccino Coffee beans: Medium roasted Cup temperature: 55 °C Coffee strength: Weak Milk temperature: 10°C Milk preparation time: 15 seconds Coffee volume: 100 ml

Coffee Latté (Caffè latte)

Coffee beans: Medium roasted Cup temperature: 55 °C Coffee strength: Weak Milk temperature: 10°C Milk preparation time: 15 seconds Foamed milk preparation time: 15 seconds Coffee volume: 100 ml

Hot milk (Hot milk)

Milk can be heated to the optimal drinking temperature without the loss of nutritional values.

Brewing beverages

In this chapter you will learn how to use this espresso machine to make various types of coffees, hot water, hot milk and foamed milk. Please read the following instructions that will help you brew the most delicious hot beverages.

The espresso machine uses hot water when brewing beverages. Avoid coming into any kind of contact with hot water – risk of scalding.

Before brewing any type of beverage, check that the message «READY» is shown on the display.

• Never use heavily roasted coffee beans.

• Store coffee beans in a dry and dark place.

• Only use room temperature drinking water. When brewing coffee, you will achieve optimal ﬂ avour using water at a temperature of 25 °C.

• To ensure that the coffee is both healthy and full of ﬂ avour, it is necessary to replace the water in the water tank every day.

• Brew coffee into preheated cups.

• Using the handle, set the height of the coffee spout according to the cup height which will prevent coffee from splashing out.

• The adjustable height of the coffee spout is: 80 - 140 mm.

ESPRESSO

The recommended volume for espresso coffee is between 30 and 50 ml. Due to the small volume of the espresso it is appropriate to preheat the cups before brewing.

1) Press the espresso icon.

2) Pressing the dial button you will start the grinder. At this moment, you can turn the same button to adjust the amount of ground coffee.

The default amount of ground coffee for an espresso coffee:

3) While the coffee is brewing, you can use the dial button to adjust the volume of the brewed beverage.

The default volume of an espresso coffee: 50 ml

4) As soon as the here shown picture appears on the display, the espresso coffee is ready.

LONG COFFEE (LUNGO, LARGE COFFEE)

The ﬂ avour of lungo coffee is much ﬁ ner than the strong ﬂ avour of espresso coffee.

1) Press the long coffee icon (large coffee).

2) Pressing the dial button you will start the grinder. At this moment, you can turn the same button to adjust the amount of ground coffee.

The default amount of ground coffee for a long coffee:

3) While the coffee is brewing, you can use the dial button to adjust the volume of the brewed beverage.

Default volume of a long coffee: 150 ml

4) As soon as the here shown picture appears on the display, the long coffee is ready.

HOT WATER (HOT WATER)

You can adjust the temperature of the hot water to three levels: high, medium and low.

1) Press the hot water icon (hot water).

The default temperature level for hot water: medium.

2) If the temperature of the water is set to the medium level, its temperature can be increased by turning the dial button to the right.

3) If the temperature of the water is set to the medium level, its temperature can be decreased by turning the dial button to the left.

4) While heating hot water, its volume can be adjusted using the dial button.

Default volume of hot water: 200 ml

LONG COFF EE

CAPPUCCINO

• While brewing cappuccino coffee, steam will be released from the spout. Avoid coming into any kind of contact with steam – risk of scalding.

• Before brewing cappuccino or latte coffee, hot milk and foamed milk, check that milk is being supplied to the frother via a hose.

• To achieve the optimal quality of foamed milk, use milk with a temperature below 10 °C.

• If the espresso machine is set to the energy saving mode, it is necessary to activate the independent heater to create steam. It is not possible to skip this process.

1) Press the cappuccino icon.

2) If the temperature is not high enough for steam generation, the independent heater will be activated.

3) As soon as the here shown picture appears on the display, the heating process is complete.

4) Pressing the dial button you will start the grinder. At this moment, you can turn the same button to adjust the amount of ground coffee.

The default amount of ground coffee for a cappuccino:

5) As soon as the here shown picture appears on the display, the milk frothing process will be started.

6) While foamed milk is pouring out, its preparation time can be adjusted using the dial button.

The default preparation time for foamed milk: 20 s.

7) As soon as the here shown picture appears on the display, the coffee brewing process will be started.

8) While the coffee is brewing, you can use the dial button to adjust its volume.

Default volume of a coffee: 100 ml

9) As soon as the here shown picture appears on the display, the cappuccino coffee is ready.

CAFFÈ LATTE (CAFFÈ LATTE)

• Use a larger cup when brewing a caffè latte.

• While brewing caffè latte, steam will be released from the spout. Avoid coming into any kind of contact with steam – risk of scalding.

• Before brewing cappuccino or latte coffee, hot milk and foamed milk, check that milk is being supplied to the frother via a hose.

1) Press the coffee latte icon.

2) If the temperature is not high enough for steam generation, the independent heater will be activated.

3) As soon as the here shown picture appears on the display, the heating process is complete.

4) Pressing the dial button you will start the grinder. At this moment, you can turn the same button to adjust the amount of ground coffee.

The default amount of ground coffee for a caffè latte:

5) As soon as the here shown picture appears on the display, the hot milk heating process will be started.

6) While hot milk is pouring out, its preparation time can be adjusted using the dial button.

The default preparation time for hot milk: 15 s

7) As soon as the here shown picture appears on the display, the milk frothing process will be started.

8) While foamed milk is pouring out, its preparation time can be adjusted using the dial button.

The default preparation time for foamed milk: 15 s

9) As soon as the here shown picture appears on the display, the coffee brewing process will be started.

10) While the coffee is brewing, you can use the dial button to adjust its volume.

Default volume of a coffee: 100 ml

11) As soon as the here shown picture appears on the display, the caffè latte is ready.

HOT MILK (HOT MILK)

• While making hot milk, steam will be released from the spout. Avoid coming into any kind of contact with steam – risk of scalding.

• Before brewing cappuccino or latte coffee, hot milk and foamed milk, check that milk is being supplied to the frother via a hose.

1) Press the milk/cream icon and using the dial button select the HOT MILK (hot milk) function.

2) Conﬁ rm the selection by pressing the dial button. If the temperature is not high enough for steam generation, the independent heater will be activated.

3) As soon as the here shown picture appears on the display, the hot milk heating process is complete.

4) While hot milk is pouring out, its preparation time can be adjusted using the dial button.

The default preparation time for hot milk: 20 s

5) As soon as the here shown picture appears on the display, the hot milk is ready.

HOT CREAM (FOAMED MILK)

• While making foamed milk, steam will be released from the spout. Avoid coming into any kind of contact with steam – risk of scalding.

• Before brewing cappuccino or latte coffee, hot milk and foamed milk, check that milk is being supplied to the frother via a hose.

1) Press the milk/cream icon and using the dial button select the HOT CREAM (foamed milk) function.

2) Press the dial button to start it. If the temperature is not high enough for steam generation, the independent heater will be activated.

3) As soon as the here shown picture appears on the display, the foamed milk heating process is complete.

4) While foamed milk is pouring out, its preparation time can be adjusted using the dial button.

The default preparation time for foamed milk: 20 s

5) As soon as the here shown picture appears on the display, the foamed milk coffee is ready.

Brewing coffee from ground coffee

Use this function if you wish to brew coffee from already ground coffee.

• The ground coffee hopper is intended only for ground coffee; never ﬁ ll it with instant coffee, cocoa powder or other mixtures. In this way you will prevent possible damage to the espresso machine.

• For dosing the ground coffee, use the provided measuring cup and always place only one measure of ground coffee into the ground coffee hopper. After using, place the measuring cup back in the bag with the accessories.

• Do not place ground coffee into the coffee bean hopper. In this way you will prevent possible damage to the espresso machine.

• Do not rinse out the ground coffee hopper with water. You risk injury by electric shock.

• Use quality coffee that is ground for brewing espresso coffee.

• The beverage brewing process from ground coffee is, with the exception of grinding coffee, the same as when brewing espresso coffee, long coffee, cappuccino coffee or caffè latte.

ma X

1) Open the lid of the ground coffee hopper.

2) Pour 1 measuring cup of ground coffee into the ground coffee hopper and close the lid.

3) As soon as the here shown picture appears on the display, select one of four coffee beverages. For this example, press the espresso icon.

4) As soon as the here shown picture appears on the display, conﬁ rm your selection by pressing the dial button.

5) While the coffee is brewing, you can use the dial button to adjust its volume.

Default volume of a espresso: 50 ml

6) As soon as the here shown picture appears on the display, the espresso coffee is ready.

7) If after ﬁ lling the ground coffee hopper you wish to cancel the brewing of the beverage, ﬁ rst continue with the brewing of the selected beverage, and then cancel the entire process by pressing the dial button.

PART 5: APPLIANCE SETTINGS

Beverage settings

• This chapter will guide you through the settings for individual programs.

• If the message «READY» is lit on the display, press the dial button, hold it down for 2 seconds and you will enter the program settings menu. The «MAINTENANCE» menu will appear on the display. In this chapter you will learn how to edit the default beverage brewing settings. You can change the strength of the coffee, the volume of the coffee, hot water temperature, hot water volume, hot milk and foamed milk heating time. If you wish to leave the program settings menu, use the dial button to set «EXIT» on the display and conﬁ rm by pressing the dial button.

• You will ﬁ nd the ranges for individual parameters on page 14.

• The parameters set through these commands will become the default settings for the individual beverages.

1. Espresso coffee settings

2. Long coffee settings

3. Hot water settings

4. Cappuccino coffee settings

5. Caffè latte settings

6. Hot milk settings

7. Foamed milk settings

ESPRESSO COFFEE SETTINGS

1) After entering the program settings menu, use the turn dial to set the value «BEVERAGE SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) If the here shown picture appears on the display (6 beverage brewing touch icons are simultaneously ﬂ ashing), the espresso machine is ready for making beverage settings.

3) Press the espresso icon and conﬁ rm your selection by pressing the dial button.

4) As soon as the here shown picture appears on the display, you can use the dial button to set the amount of freshly ground coffee. Conﬁ rm the change to the settings by pressing the dial button

5) As soon as the here shown picture appears on the display, you can use the dial button to set the volume of the brewed coffee.

6) Press the dial button to conﬁ rm the setting changes. As soon as the here shown picture appears on the display, the espresso coffee settings are complete.

LONG COFFEE / LARGE COFFEE SETTINGS

The instructions for setting a long coffee are the same as for espresso coffee. It is not necessary to describe them further.

HOT WATER / HOT WATER SETTINGS

1) After entering the program settings menu, use the turn dial to set the value «BEVERAGE SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) If the here shown picture appears on the display (6 beverage brewing touch icons are simultaneously ﬂ ashing), the espresso machine is ready for making beverage settings.

3) Press the hot water icon and conﬁ rm your selection by pressing the dial button.

4) As soon as the here shown picture appears on the display, you can use the dial button to set the hot water temperature. Conﬁ rm the change to the settings by pressing the dial button.

5) As soon as the here shown picture appears on the display, you can use the dial button to set the hot water volume.

6) Press the dial button to conﬁ rm the setting changes. As soon as the here shown picture appears on the display, the hot water settings are complete.

CAPPUCCINO SETTINGS

1) After entering the program settings menu, use the turn dial to set the value «BEVERAGE SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) If the here shown picture appears on the display (6 beverage brewing touch icons are simultaneously ﬂ ashing), the espresso machine is ready for making beverage settings.

3) Press the cappuccino icon and conﬁ rm your selection by pressing the dial button.

4) As soon as the here shown picture appears on the display, you can use the dial button to set the amount of freshly ground coffee. Conﬁ rm the change to the settings by pressing the dial button.

5) As soon as the here shown picture appears on the display, you can use the dial button to set the volume of the brewed coffee. Conﬁ rm the change to the settings by pressing the dial button.

6) As soon as the here shown picture appears on the display, you can use the dial button to set the milk frothing time.

7) Press the dial button to conﬁ rm the setting changes. As soon as the here shown picture appears on the display, the cappuccino coffee settings are complete.

COFFEE LATTE ICON / CAFFÈ LATTE SETTINGS

1) After entering the program settings menu, use the turn dial to set the value «BEVERAGE SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) If the here shown picture appears on the display (6 beverage brewing touch icons are simultaneously ﬂ ashing), the espresso machine is ready for making beverage settings.

3) Press the caffè latte icon and conﬁ rm your selection by pressing the dial button.

4) As soon as the here shown picture appears on the display, you can use the dial button to set the amount of freshly ground coffee. Conﬁ rm the change to the settings by pressing the dial button.

5) As soon as the here shown picture appears on the display, you can use the dial button to set the volume of the brewed coffee. Conﬁ rm the change to the settings by pressing the dial button.

6) As soon as the here shown picture appears on the display, you can use the dial button to set the hot milk heating time. Conﬁ rm the change to the settings by pressing the dial button.

7) As soon as the here shown picture appears on the display, you can use the dial button to set the milk frothing time.

8) Press the dial button to conﬁ rm the setting changes. As soon as the here shown picture appears on the display, the caffè latte settings are complete.

HOT MILK / HOT MILK SETTINGS

1) After entering the program settings menu, use the turn dial to set the value «BEVERAGE SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) If the here shown picture appears on the display (6 beverage brewing touch icons are simultaneously ﬂ ashing), the espresso machine is ready for making beverage settings.

3) Press the milk/cream icon, turn the dial button to mark the selection «HOT MILK» on the display and conﬁ rm by pressing the dial button.

4) As soon as the here shown picture appears on the display, you can use the dial button to set the hot milk heating time.

5) Press the dial button to conﬁ rm the setting changes. As soon as the here shown picture appears on the display, the hot milk settings are complete.

HOT CREAM / FOAMED MILK SETTINGS

1) After entering the program settings menu, use the turn dial to set the value «BEVERAGE SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) If the here shown picture appears on the display (6 beverage brewing touch icons are simultaneously ﬂ ashing), the espresso machine is ready for making beverage settings.

3) Press the milk/cream icon, turn the dial button to mark the selection «HOT CREAM» on the display and conﬁ rm by pressing the dial button.

4) As soon as the here shown picture appears on the display, you can use the dial button to set the milk frothing time.

5) Press the dial button to conﬁ rm the setting changes. As soon as the here shown picture appears on the display, the foamed milk settings are complete.

Water ﬁ lter

This chapter will guide you through the replacement and installation of the water ﬁ lter. Use only original water ﬁ lters purchased in specialised electrical appliance stores or contact the manufacturer directly.

Installing the water ﬁ lter

1) After entering the program settings menu, use the turn dial to set the value «FILTER» on the display; conﬁ rm the selection by pressing the dial button.

2) Use the turn dial to set the value «INSTALL FILTER» on the display; conﬁ rm the selection by pressing the dial button.

3) Take out the water ﬁ lter, set the current month on it, place it back into the water tank and press the dial button.

4) After installing the water ﬁ lter, ﬂ ush it out by pressing the clean button.

5) Approximately 500 ml of water is required for ﬂ ushing out the water ﬁ lter.

6) As soon as the ﬂ ushing process is ﬁ nished, the message «FILTER» will appear on the display of the espresso machine. (If you wish to leave the program settings menu, use the dial button to set «EXIT» on the display and conﬁ rm by pressing the dial button.)

Replacing the water ﬁ lter

1) After entering the program settings menu, use the turn dial to set the value «FILTER» on the display; conﬁ rm the selection by pressing the dial button.

2) Use the turn dial to set the value «REPLACE FILTER» on the display; conﬁ rm the selection by pressing the dial button.

3) Take the water ﬁ lter out of the water tank. Set the current month on the new water ﬁ lter and place it into the water tank. Press the dial button.

4) After installing the new water ﬁ lter, ﬂ ush it out by pressing the clean button.

5) Approximately 500 ml of water is required for ﬂ ushing out the water ﬁ lter.

Adjusting the water hardness setting

According to page 7 in the user's manual, test the hardness of the used water and according to the test results set the water hardness on the appliance according to the table below. Default factory settings:

Water °dH Settings Very low ‹ 3.9

Soft 3.9 – 7

Moderately hard 7.01 – 14

Hard 14.1 - 21

Very hard › 21

1) After entering the program settings menu, use the turn dial to set the value «WATER HARDNESS» on the display; conﬁ rm the selection by pressing the dial button.

2) Turn the turn dial to set the water hardness on the display:

3) Press the dial button to save the water hardness setting.

4) As soon as the water hardness setting is ﬁ nished, the message «WATER HARDNESS» will appear on the display of the espresso machine. (If you wish to leave the program settings menu, use the dial button to set «EXIT» on the display and conﬁ rm by pressing the dial button.)

Setting the economical ECO mode

• In the energy saving mode the espresso machine needs 30 seconds to heat up when brewing cappuccino coffee, caffè latte, or heating hot milk and foamed milk. When brewing the above described beverages in normal mode, the mentioned heating up is not needed. Nevertheless, normal mode has higher demands on power than the energy saving mode.

• The espresso machine is factory-set to normal mode.

1) After entering the program settings menu, use the turn dial to set the value «ECO SETTING» on the display; conﬁ rm the selection by pressing the dial button.

2) Turn the dial button to mark the energy saving mode «ECO MODE».

3) Or turn the dial button to mark normal mode «NORMAL MODE».

4) Conﬁ rm the selection by pressing the dial button.

5) As soon as the energy mode setting is ﬁ nished, the message «ECO SETTING» will appear on the display of the espresso machine. (If you wish to leave the program settings menu, use the dial button to set «EXIT» on the display and conﬁ rm by pressing the dial button.)

Automatic shut off

• By setting the automatic shut off mode, you save electricity.

• The default setting for the automatic shut off is 2 hours, the espresso machine will therefore turn off automatically after being idle for 2 hours.

• The required idle time can be set in the range from 15 minutes to 15 hours.

1) After entering the program settings menu, use the turn dial to set the value «AUTO-OFF» on the display; conﬁ rm the selection by pressing the dial button.

2) Turn the dial button to set the idle time of the espresso machine before automatic shut-off.

3) Conﬁ rm the selection by pressing the dial button.

4) As soon as the automatic shut off setting is ﬁ nished, the message «AUTO-OFF» will appear on the display of the espresso machine. (If you wish to leave the program settings menu, use the dial button to set «EXIT» on the display and conﬁ rm by pressing the dial button.)

Information

• In this program you can ﬁ nd out how many individual beverages were brewed during the operation of the appliance, total number of brewed beverages and number of maintenance tasks.

1. Total number of brewed beverages.

2. Number of brewed cups of espresso coffee.

3. Number of brewed cups of long coffee.

4. Number of brewed cups of long coffee.

5. Number of brewed cups of cappuccino coffee.

6. Number of brewed cups of caffè latte.

7. Number of brewed cups from ground coffee.

8. Number of brewed cups of hot milk.

9. Number of brewed cups of foamed milk.

10. Number of cleans.

11. Number of cleans of the brewing unit.

12. Number of descaling processes.

13. Number of installations and replacements of water ﬁ lters.

• Due to the testing of the espresso machine in the factory, there are already several brewed beverages recorded on ﬁ rst use.

1) After entering the program settings menu, use the turn dial to set the value «INFORMATION» on the display; conﬁ rm the selection by pressing the dial button.

2) Turn the dial button to display the software version of the espresso machine.

3) If you wish to view the statistics for the amount of produced beverages and maintenance, turn the dial button to set the value «NUMBER OF USE» on the display. Conﬁ rm the selection by pressing the dial button.

4) Then the total number of produced beverages will be shown on the display.

5) Turn the turn dial to now browse through the statistics of the individual beverages and types of maintenance. Press the dial button to return to the program settings menu.

6) If you wish to go from the INFORMATION menu to the program settings menu without displaying the individual statistics, use the dial button to set the value «BACK» on the display and press the dial button.

+ 178 hidden pages