USE CALCULATOR ................................................... 77
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
9
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
10
I
MPORTANT INFORMATION
CAUTION: The battery is not charged when you take it out of the
box. Do not remove the battery pack when the device is charging.
Your warranty is invalidated if you disassemble or change the
device shell. (The warranty for this product is void by opening or
disassembling the device's case).
LEGAL INFORMATION ABOUT INTELLECTUAL PROPERTY
All company, product and service names mentioned herein are
trademarks, registered trademarks or service marks of their
respective owners. Shanghai Feixun Communication Co., Ltd.
reserves the right to revise the content of this document at any
time without prior notice. No part of this document may be
reproduced or transmitted in any form or by any means,
electronic or mechanical, including photo- copying, recording or
storing in a retrieval system, or translated into any language in
any form without prior written permission of Shanghai Feixun
Communication Co., Ltd.
DISCLAIMER
Any pre-installed software or data provided as a bundle to this
device is subject to the applicable law under the responsibility of
the issuing software/service provider. The hardware
manufacturer cannot be held liable for any breach, malfunction
or other occurrence raised by using this third-party software.
Only the issuing providers can lawfully be held responsible.
Shanghai Feixun Communication Co., Ltd. does not own the
intellectual property of the third-party software and applications
that are delivered with this product. Therefore, Shanghai Feixun
Communication Co., Ltd. will not provide any warranty of any
kind for these third-party software and applications. Neither will
Shanghai Feixun Communication Co., Ltd. provide support to
customers who use these third-party software and applications
nor be responsible or liable for the functions of these third-party
software and applications. Third-party software and applications
services may be interrupted or terminated at any time. Shanghai
Feixun Communication Co., Ltd. does not guarantee that any
content or service would be maintained for any period during its
availability. Third-party service providers provide content and
services through network or transmission tools outside of the
control of Shanghai Feixun Communication Co., Ltd. To the
greatest extent permitted by applicable law, it is explicitly stated
that Shanghai Feixun Communication Co., Ltd. shall not
compensate or be liable for services provided by third-party
service providers or the interruption or termination of
third-party contents or services.
Shanghai Feixun Communication Co., Ltd. shall not be
responsible for the legality, quality or any other aspects of any
software installed on this product, or for any uploaded or
downloaded third-party works, such as texts, images, videos or
software. Customers shall bear the risk for any and all effects
including incompatibility between the software and this product,
which result from installing software or uploading or
downloading the third-party works.
This product uses the open-source Android platform. Shanghai
Feixun Communication Co., Ltd. has made necessary changes to
the platform. Therefore, this product may not support all the
functions that are supported by the standard Android platform
or may be incompatible with third-party software. Shanghai
Feixun Communication Co., Ltd. shall not be liable for any of
such situation.
LIMITATION OF DAMAGES
To the maximum extent permitted by applicable law, in no event
shall Shanghai Feixun Communication Co., Ltd. be liable for any
special incidental, indirect, or consequential damages or lost
profits, business, revenue, data, goodwill or anticipated savings.
The maximum liability (this limitation shall not apply to liability
for personal injury to the extent applicable law prohibits such a
limitation) of Shanghai Feixun Communication Co., Ltd.
Arising from the use of the product described in this document
shall be limited to the amount paid by customers for the
purchase of this product.
IMPORTANT HEALTH INFORMATION AND SAFETY
PRECAUTIONS
When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the
product.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
11
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
12
To reduce the risk of bodily injury, electric shock, fire, and
damage to the equipment, observes the following precautions.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION:Connecting to a weaker
inappropriate charger can result in an electric
shock to your device
This product is equipped with a USB Cable for connecting with
desktop or notebook computers. Be sure your computer is
properly grounded (earthed) before connecting this product to
the computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
outlet which is properly installed and grounded in accordance
with all local codes and ordinances.
SAFETY PRECAUTIONS FOR PROPER SUPPLY UNIT
Use the correct power source
This product can only be charged with matching battery,
standard external power source or battery, external power
source appointed by Shanghai Feixun Communication Co., Ltd.
Shanghai Feixun Communication Co., Ltd. is not liable for any
device breakdown or safety accident arising from the use of
unauthorized battery or external power source.
Handle power packs carefully
The product contains a Li-ion battery. There is a risk of fire and
burns if the battery pack is handled improperly. Do not attempt
to open or service the battery pack. To reduce risk of fire or
burns, do not disassemble, crush, puncture, short external
contacts or circuits, or expose a battery pack to temperatures
higher than 60˚C (140˚F), or pose of in fire.
WARNING: There is danger of
explosion if battery is incorrectly
replaced. Replace only with specified
batteries. Recycle or dispose of used batteries according to the
local regulations or reference guide supplied with your product.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
13
Instructions for battery disposal
1. If the battery of your product is marked with this symbol
they are subject to the European Directive 2006/66/EC.
2. Batteries must always be separated from household waste
and disposed according to applicable regulations.
3. By ensuring correct disposal of your old batteries harmful
effects on humans, animals and the environment can be
avoided.
4. For detailed information about disposal of used batteries,
please contact your local office, waste disposal service or the
shop where you purchased the product.
Take extra precaution
Keep the battery or device dry and away from water or any
liquid as it may cause a short circuit.
Keep metal objects away so they don’t come in contact with
the battery or its connectors as it may lead to short circuit
during operation.
Do not use a battery that appears damaged, deformed, or
discolored, or the one that has any rust on its casing,
overheats, or emits a foul odor.
Consult the doctor immediately if the battery is swallowed.
If the battery leaks
Do not allow the leaking fluid to come in contact with skin or
clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.
Do not allow the leaking fluid to come in contact with eyes. If
already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
Take extra precautions to keep a leaking battery away from
SAFETY PRECAUTION FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme
temperatures. The device is designed to be operated in
temperatures between 0℃ and 33℃ (32℃ to 91.4℃). Low- or hightemperature conditions might temporarily shorten battery life or
cause the device to temporarily stop working properly. Do not
leave the product or its battery inside a vehicle or in places
where the temperature may exceed 60°C (140°F), such as on a
car dashboard, window sill, or behind a glass that is exposed to
direct sunlight or strong ultraviolet light for extended periods of
time. Avoid dramatic changes in temperature or humidity when
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
14
you.
using the device as condensation may form on or within the
device.
When you are using the device or charging the battery, it is
normal for device to get warm. The exterior of the device
functions as a cooling surface that transfers heat from inside the
unit to the cooler air outside.
PRECAUTION OF HEARING LOSS
CAUTION: To prevent possible hearing damage,
do not listen at high volume levels for long
periods.
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Permanent hearing loss may occur if the receiver, headphones,
speakerphone, or earpieces are used at high volume. Use only
compatible receivers, headphones, speakerphones or earpieces
with your device. Turn on the audio and check the volume before
inserting anything in your ear. You can adapt over time to a higher
volume of sound that may sound normal but can be damaging to
your hearing. If you experience ringing in your ears or muffled
speech, stop listening and have your hearing checked. The louder
the volume, the less time is required before your hearing could be
affected. Hearing experts suggest that to protect your hearing:
Limit the amount of time you use the receiver, headphones,
speakerphone, or earpieces at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device on board an airplane is against the law in most
countries. Please comply with all regulations specified by airlines
and turn off your phone or switch to Airplane Mode.
ENVIROMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as below deck on boats,
fuel or chemical transfer or storage facilities, and areas where
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
15
the air contains chemicals or particles, such as grain, dust, or
metal powders. Please be aware that sparks in such areas could
cause an explosion or fire resulting in bodily injury or even
death.
EXPLOSIVE ATMOSPHERES
In any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and
the user should obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury
or even death. Users are advised not to use the equipment at
refueling areas such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio
equipment in fuel depots, chemical plants, or where blasting
operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. These
include fueling areas, below deck on boats, fuel or chemical
transfer or storage facilities, and areas where the air contains
chemicals or particles, such as dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use phone
services with handheld devices, except in the case of emergency.
In some countries, using hands-free devices as an alternative is
allowed. Please inform yourself before driving about the legal
requirements.
SAFETY PRECAUTIONS FOR RADIO FREQUENCE EXPOSURE
Avoid using your phone near metal structures (for example,
the steel frame of a building).
Avoid using your phone near strong electromagnetic sources,
such as microwave ovens, sound speakers, TV and radio.
Use only original manufacturer-approved accessories.
Use of non-original manufacturer-approved accessories may
violate your local RF exposure guidelines and should be
avoided.
INTERFERENCES WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The
use of this device is forbidden in most hospitals and medical
clinics.
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
16
shielded from external RF energy. Turn your phone OFF in health
care facilities when any regulations posted in these areas
instruct you to do so.
HEARING AID DEVICES
Some digital wireless phones may interfere with some hearing aid
devices. In the event of such interference, you may want to
consult your service provider, or call the customer service line to
discuss alternatives.
NON-IONIZING RADIATION
Your device has an internal antenna. This product should be
operated in its normal-use position to ensure the radiative
performance and safety of the interference. As with other mobile
radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of
personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized or
modified antennas may impair call quality and damage the phone,
causing loss of performance and SAR levels exceeding the
recommended limits as well as result in noncompliance with local
regulatory requirements in your country.
To assure optimal phone performance and ensure human
exposure to RF energy is within the guidelines set forth in the
relevant standards, always use your device only in its normal-use
position. Contact with the antenna area may impair call quality
and cause your device to operate at a higher power level than
needed. Avoiding contact with the antenna area when the phone
is IN USE optimizes the antenna performance and the battery life.
Position der Antenne
GENERAL PRECAUTIONS
AVOID APPLYING EXCESSIVE PRESSURE TO THE DEVICE
Do not apply excessive pressure on the screen and the device to
prevent damaging them and causing cracked display of the touch
screens. Do not put the device in your pants’ pocket for a
prolonged period of time.
DEVICE IS GETTING WARM AFTER PROLONGED USE
When using your device for prolonged periods of time, such as
when you’re talking on the phone, charging the battery or
browsing the web, the device may become warm. In most cases,
this condition is normal and therefore should not be interpreted
as a problem with the device.
HEED SERVICE MARKING
Except as explained elsewhere in the Operating or Service
documentation, do not repair any product yourself. Service
needed on components inside the device should be done by an
authorized service outlet or provider.
PHICOMM is entitled to use new or reconditioned replacements
parts or boards for repairs under warranty, provided they have
the same functionality as the parts to be replaced.
DAMAGE REQUIRING SERVICE
Unplug the product from the electrical outlet and refer servicing
to an authorized service center or provider under the following
conditions:
Liquid has been spilled or an object has fallen onto the
product.
The product has been exposed to rain or water.
There are noticeable signs of overheating.
The product does not operate normally when you follow the
operating instructions.
AVOID HOT AREAS
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
AVOID WET AREAS
Never use the product in a wet location.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
17
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
18
AVOID USING YOUR DEVICE AFTER A DRAMATIC CHANGE IN
TEMPERATURE
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may
form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the
device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from
high-temperature conditions into a cooler environment, allow
the device to acclimate to room temperature before turning on
power.
AVOID PUSHING OBJECTS INTO THE DEVICE
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
MOUNTING ACCESSORIES
Do not use the product on an unstable table, cart, stand, tripod,
or bracket. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
AVOID UNSTABLE MOUNTING
Do not place the product with an unstable base.
USE PRODUCT WITH APPROVED EQUIPMENT
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
ADJUST THE VOLUME
Turn down the volume before using head-phones or other audio
devices.
smudginess and dyeing, please wipe it with clean damp sponge
immediately. Please keep the device dry when necessary.
HERZSCHRITTMACHER
The device may cause disturbance to
pacemakers. Please keep the device a proper
distance of at least 5 centimeters away from
pacemakers. In no case should the device be
put in the front pocket of your shirt or coat.
If you need detailed information about other
active implantable medical devices, please
consult your doctor to ensure the magnetic
interference of such active implantable medical
devices.
EC CONFORMITY
! Observe the national local regulations in the location where
the device is to be used. This device may be registered for use
in some or all member states of the European Union (EU).
! This device may be operated in all member states of the EU.
We fulfil the requirements of the R&TTE Directive (1999/5/EC).
Phicomm Smartphone CLUE – C230
CLEANING
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning, but NEVER use water to clean the LCD screen.
The device has been provided with special treatments featuring
that it could dispose dirt and sweat on its surface. The device
itself does not have a stain-resistant function. In case of
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
19
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
20
G
ET TO KNOW YOUR PHONE
ABOUT ANDROIDTM
Phicomm smartphones are based on Android Software platform.
Android™ is an operating system that was developed for mobile
devices with touch controls (smartphones and tablets). You can
customize your smartphone individually and delete, add or
expand applications. Hundreds of thousands of applications are
available via Google Play™ - you can choose from simple games
to complex multimedia applications.
Android™ is continuously developed. Software updates from
Google™ first have to be checked and then, if appropriate, be
compatible, to fit your devices. Therefore a potential update is
not available at the same time with a Google™ update.
On your Phicomm device some Google™ services are
pre-installed. In order to maximize their benefits, you should
have a Google™ account and sign up when you first start your
Phicomm device.
BOX CONTENT
The phone packaging box should contain following items:
Phone
Battery
Power Adapter
Wired Stereo Headset
USB cable
Quick Start Guide
Two additional battery covers
PHONE COMPONENTS
❶
Receiver
❷
Light Sensor
❸
Camera Lens (front)
❹
Volume Control Button
❺
Power Key
❻
Back Cover Opening
❼
Menu Key
❽
Home Key
❾
Back Key
❿
Data Line Interface
⓫
Headset Socket
⓬
Flash
⓭
Camera Lens (back)
INSTALLING SIM CARD, BATTERY AND SD CARD
Make sure to always turn off the power before installing or
replacing the SIM card and battery. Also, remove the back cover
before you can install the SIM card, battery and storage card.
REMOVE BATTERY COVER
1. Make sure your device is turned off.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
21
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
22
2. Carefully hold the device with the front panel facing down.
Small
opening
3. Hold the lower half of back cover up with your fingers.
Remove it from the opening.
REINSTALL BACK COVER
1. First hold the upper half of the back. Fasten and align it on
the device.
2. Slide the back cover into the slots provided.
SIM CARD
The SIM card includes your phone number, the service information,
the phone book and the message storage.
Install SIM card
1. Make sure the phone is off.
2. With the SIM card’s gold contacts facing down and its cut-off
corner facing out, insert the SIM card into the SIM card slot.
NOTICE:
SIM cards can be installed at the same time. The G card (GSM)
only can be installed on the left, and both G card (GSM) or W
card (WCDMA/UMTS) can be installed on the right.
The phone is dual card dual-standby mobile phone; two
BATTERY
Your device is equipped with a rechargeable lithium-ion battery
and is designed to use only manufacturer-approved batteries and
accessories. Battery performance depends on many factors,
including network configuration, the phone operating room
temperature, selected and used functions and settings, patterns of
use of sound, data and other applications. The new battery in the
phone is only half charged. Please charge the battery fully before
use.
Insert battery
1. Align the battery’s exposed copper contacts with the battery
connectors inside the battery compartment.
2. Insert the contact’s side of the battery first and then gently
push the battery into place.
3. Close the battery cover.
Remove battery
1. Make sure the phone is off.
2. Remove the back cover.
3. Remove the battery from the small opening on top side of
the battery compartment.
The metal contacts
Remove SIM card
1. Remove the back cover and battery.
2. Take out the SIM card.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
2 2
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
3
SD CARD
Please install microSD card in your phone to store photos, music
and apps.
The camera and gallery application can only be initiated after the
installation of microSD card.
Install SD card
Insert the microSD card into the slot with its gold contacts facing
down.
BUTTONS ON PHONE PANEL
BUTTONS ON FRONT PANEL
The buttons on the front panel can perform the following
operations:
FUNCTIONS
CHARGING THE BATTERY
1. Connect the power adapter and the USB connector of your
phone with the USB cable
2. Plug in the power adapter to an electrical outlet to start
charging the battery.
NOTICE:
charging battery icon is displayed in your phone’s title bar.
After the battery has been fully charged, the charging battery icon
turns to a full battery icon .
OPTIMIZATION OF BATTERY POWER
You can use the following tips to improve your battery
performance.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
When you charge the battery while the phone is on, the
Charge your device often.
Disable all data connections over mobile network, if you do
not access the internet. Downloading data from internet
consumes a lot of battery power.
Deactivate Bluetooth™ or WLAN, if you don’t need these
functions.
Extend the interval of the synchronization frequency (e.g.
synchronization of e-mail, calendar and contacts).
4 4
Home key: Press to get back the home screen from any
application or scene
Menu key: Press to start operation list for you to operate in
the current scene or option.
Back key: Press to get back to the former scene or close
dialogue box, notification or screen keyboard.
USING THE TOUCHSCREEN
To protect your phone, the device is supplied with a protective film
on the screen. You should remove it before using the touch screen,
as it otherwise may possibly lead to interferences with the use.
The device screen is made of glass. Please do not touch, when the
glass is cracked or broken. Do not attempt to repair a damaged
screen yourself. You should also make sure that you do not drop
your phone or expose mechanical shocks to it. A negligent
handling is not covered by the Phicomm warranty.
There are various options to use your phone.
TAP
When you want to type using the keyboard, select items on screen
such as applications or setting icon or press on screen buttons
simply then tap them with your finger.
TAP AND HOLD
To open the available options for an item (for example a contact or
link in a web page) simply press and hold the item.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
5
SWIPE OR SLIDE
To swipe or slide means to quickly drag your finger vertically or
horizontally across the screen.
START GUIDE
You can start using your phone after installing the SIM car, the
battery and microSD card.
DRAG
Press and hold your fingers with some pressure before you start to
drag.
While dragging do not release your finger until you have reached
the target position.
FLICK
Flicking the screen is similar to swiping, except that you need to
swipe your finger in light, quick strokes. This finger gesture is
always in a vertical direction, such as when flicking the contacts or
messaging list.
ROTATE
For most screens you can automatically change the screen
orientation from portrait to landscape by turning the phone
sideways. When entering text you can turn the phone sideways to
bring up a bigger keyboard.
NOTICE:
checkbox Auto-rotate screen: home screen > menu key > system
settings > display.
PINCH
In some apps, like gallery or the web browser you can “pinch” the
screen using two fingers (for example thumb and index finger) to
zoom in or zoom out when viewing a picture or a web page.
Place two fingers on the screen and pull them together to zoom in
and pull open to zoom out. Your fingers must be in the zoomable
line region (eg, within the photo frame).
SENSORS
Your Phicomm device has sensors for light and distance
measurement. The screen brightness is adjusted according to the
intensity of the ambient light. The proximity sensor turns the
touch screen off when your phone calls when your ear is near the
screen to prevent turning on other device functions accidentally.
To automatically change the screen orientation you need
TURN ON YOUR PHONE
The battery must be charged for at least 30 minutes before turning
on the power for the first time.
1. Press and hold the power key for a few seconds.
2. When the screen dims, press the power key again to reactivate
it again.
3. When prompted, enter the PIN for your SIM card and confirm
with OK.
4. Slide your finger from the middle to the right to unlock the
screen.
TURN OFF YOUR PHONE
1. Press and hold the power key for a few seconds.
2. Tap Power off.
3. Confirm with OK.
ENTERING THE PIN
If your SIM card come with a PIN (personal identification number),
you will be asked for a PIN, enter it and then tap OK. If you need
detailed information about how to enable or disable your SIM card
PIN, please read chapter eight “Protecting your phone”.
NOTICE: If you enter the wrong PIN three times your SIM card will
be blocked. In such case you must contact your carrier for the PUK
(PIN unblocking key) to unlock your phone.
AUTOMATIC SCREEN OFF
When the phone is unused for a while, the screen will be
automatically closed to save power. You can still receive messages
and incoming calls when it’s closed.
UNLOCK SCREEN
1. To unlock the screen press the power button.
2. Touch and move it to the right.
HOME SCREEN
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
6 6
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
7
The home screen provides a lot of free space for you to add new
items. You can add new applications, shortcuts, folders or Google
tools to quickly save messages and applications.
EXTEND HOME SCREEN
The home screen can be extended beyond the screen width to
provide more space for you to add new icons or widgets. Tap
home screen and slide your finger to the left or to the right quickly.
Up to four pages are available. No extra screen can be added.
MOVING ITEMS ON HOME SCREEN
1. Press and hold the items you would like to move to enable
the editing mode.
2. Fix your finger on the scene and drag the item directly to the
desired location and release your finger.
NOTICE: If you want to move the item from the home screen to
the extended home screen, press and hold the item and drag it
to the left or right. Then the scene will switch to the extended
home screen. Locate the item on the scene and release your
finger.
DELETING ITEMS FROM HOME SCREEN
1. Press and hold the item you would like to delete until the
Word Remove appears on the top of the screen.
2. Drag the item to the word Remove.
3. Release the item as soon as the color changed to re.
CHANGING THE WALLPAPER
1. Long press the home screen.
2. Tap on Wallpaper.
3. Select a wallpaper option.
4. Select wallpaper and confirm with Set wallpaper.
ORGANIZING ITEMS IN FOLDERS / ADD NEW ICONS
On the home screen you can arrange items into folders and add
new apps-icons.
1. Press and hold on the home screen on the item you would
like to arrange in a folder.
2. Now stack it on top of another icon you wish to arrange a
folder with.
3. Release the icon. A new folder will be created automatically.
NOTICE: Do delete the folder please follow the steps “DELETING
ITEMS FROM HOME SCREEN”.
RENAMING FOLDERS
1. Tap on the folder to open it.
2. Tap on the title bar to activate the edit mode.
3. Insert a new name and confirm with Done.
APPLICATION SCREEN
The application screen can be open via your home screen and
includes pre-installed apps as well as the app you downloaded.
The application screen extends beyond the regular screen width,
so you need to flick left and right.
Tap on the home screen on .
LINKING TO HOME SCREEN
1. Tap on the home screen on .
2. Press and hold the app you would like to move to the home
screen until the icon is highlighted. The home screen will
open.
3. Move the app icon to the wished position and release it.
WIDGETS
Widgets are small apps that can be used directly on the home
screen. The Flashlight Widget makes your phone a small
flashlight.
To add a widget:
1. Tap on the home scree on .
2. Tap on Widgets.
3. Press and hold the chosen widget until the icon is
highlighted.
4. Move the widget to the wished position and release it.
STATUS AND NOTIFICATION
STATUS ICONS
The following are some of the status icons that you may see in the
status bar:
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
8 8
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
9
Using the status bar, you also can ajdust the basic device settings,
Pull down
such as WLAN, Bluetooth™ or Mobile data.
OPEN NOTIFICATION PANEL
Seeing new notification icon in status bar, tap and hold the status
bar and then slide your finger down to open up the status bar
(notification panel).
If there are many notifications just scroll down the screen to see
more notifications.
CLOSE NOTIFICATION PANEL
Tap and hold the bottom of the notification panel and slide your
finger upwards on the screen and release.
HANDLE SETTINGS WITH THE NOTIFICATION PANEL
Using the status bar, you also can ajdust the basic device settings,
such as WLAN, Bluetooth™ or Mobile data.
1. Tap on the status bar and move downwards.
2. Tap on .
3. Tap on the function you would like to adjust.
4. Tap on the back key or the home key to return to your home
screen.
NOTIFICATIONS (STATUS BAR)
Notifications icons opens to display when recieving new messages,
set calendar events, clock or forwarded calls as well as your
current call status. You can enable the notifications panel to get an
information about your messages or calendar events and check
the carrier’s name.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
10 10
USING SD CARD AS USB DISK DRIVE
Set your storage card as USB disk drive if you want to transmit
music, photos and other information to your phone storage card.
The device support Micro SD™ cards that also can be used in other
compatible devices.
SET UP SD CARD AS USB DISK DRIVE
1. Connect your phone to your computer with a USB data cable.
You will get a notification in the status bar.
2. Pull down the status bar.
3. Tap on USB debugging connected.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
11
4. Tap on the check box USB debugging to activate it and
confirm with OK.
5. Pull down the status bar again.
6. Tap on Connected in / as … .
7. Select an option.
DISCONNECT USB CONNECTION SAFETLY
1. Pull down status bar.
2. Tap on USB debugging connected.
3. Tap on the check box USB debugging to disconnect from your
PC safely. You now can remove the data cable.
OPTIMIZE PHONE MEMORY
The phone memory is made up as follows:
Internal memory: Randon Access Memory (RAM)
Internal drive space: Read Only Memory (ROM)
SD-Karte: drive space
The RAM is usually very limied. It mus be ensured that a sufficient
amount of memory (RAM) is always available. Ohterwise, the
phone reacts very sluggish, applications can not boot or crash and
it may possibly be a problem with the installation of new apps.
Please note RAM con not be expanded.
The majority of the internal drive memory is already occupied by
the operation system and pre-installed applications. These can’t be
removed without proper root privilges. Please note, warranty
expires if the devices was rooted self-employed.
The ROM can be expanded by using a SD card. Many applications
can be installed directly to the SD card after download. However,
each application will still store some data automatically on the
ROM. Unfortunately, some applications can not be moved to the
SD card as these do not work properly from there.
Here are some tips on how you can set your Phicomm smartphone
save storage space:
1. Apps that start automatically
Surely you use applications where it is desireable that these
start immediately after switching on the phone. Other hand,
numerous applications are preinstalled that you do not use. The
social network apps for example mostly use a huge part of ROM
and RAM.
With app “Startup Manager” from Google Play™ you can assign
any application easily whether it should start automatically or
not. Please only deactivate the automatic start if you are sure
of the mode of action. Otherwise, the function of your
smartphone might be limited.
2. Monitor background processes
In most cases the background processes of the apps thus
contributes to a decrease of performance. With the “Android
Assitant” from Google™ you can monitor such processes and
close unneeded applications.
Phicomm also provides a pre-installed application called
“Process Manager” to monitor and optimize background
processes. The Memory tab shows what process is running in
the background and is proposed for closure.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
12 12
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
13
M
card
access, select cell broadcasts
other
system notification tones
network loca
tion
locks, adjust your device administration,
Coporate account
SYSTEM
accelerated rendering, moni
toring and apps
ANAGE YOUR PHONE
PHONE SETTINGS
Familiarize yourself with the following phone settings for a better
handling.
WIRELESS & NETWORKS
WLAN Turn on / off WLAN, scan for available
Mobile data Turn on / off Mobile data, enables the
networks or add new WLAN network
exchange of data over the internet via SIM
make your password visible
Language & input Adjust the language, keyboard & input
methods as well as speech and mouse /
trackpad
Backup & reset Back up your data and account and make a
factory data reset
ACCOUNTS
Add account Add and adjust Email / Google account /
Bluetooth Turn on / off Bluetooth, scan for avaiable
Bluetooth devices and make your device
visible for other users
Data usage Shows information about your data usage.
More … Switch on / off airplane mode, add VPN
network, Release mobile data as portable
WLAN hotspot or Bluetooth tethering,
manage mobile networks and enable data
DEVICE
Dual SIM settings Your phone does operate with dual SIM
Sound Adjust the volume of Media, ringtones and
Display Adjust the brightness, wallpaperm Sleep
Storage Show the phone total storage and external
Battery Shows the battery status and usage of the
Apps Manage apps and change the preferred
PERSONAL
Location access Access to my location (Google), GPS
Security Protect your phone by setting up different
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
(standby). You can insert and install two SIM
cards at the same time an modify your
preferred SIM settings
function, auto-rotate screen and font size
storage space
different apps that are in use
install location for new apps
satellites location and WLAN & mobile
14 14
Date & time Adjust date & time, select time zone
manually or set automatically, Select date
and time format
Accessibility Install accessibility services and activate and
stay awake, desktop backup password and
for debugging, input, drawing, hardware
About phone Information about your phone like model
number, Software version, RAM, system
update and status
To open the phone setting tap on the homescreen on the menu
key and the non system settings.
MANAGE THE BASE SETTINGS
You can ustomize various device settings to suit your needs. For
example, you can change the language, add a ring tone, or
adjust the brightness of the screen.
ADJUST DATE AND TIME
You can adjust the date and time either manually or use network
provided information.
Set up date & time manually
1. Tap on the homescreeon no the menu key.
2. Select System seetings > date & time.
3. Deactivate the check box Automatic date & time if activated.
4. Tap on Set date or Set time.
5. Scroll up or down to set the date, the hour and minute.
6. Confirm with Done.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
15
Set up time zone
1. Tap on the homescreen on the menu key.
2. Select System settings > Date & time.
3. Deactivate the check box Automatic time zone, if activated.
4. Tap on Select time zone.
5. Select a time zone.
CALL SETTINGS
Set up ringer for incoming calls
1. Tap on the home screen on the menu key.
2. Select System settings > Sound > Phone ringtone.
3. Tap on phone ringtone and Select one.
4. Confirm with OK.
NOTICE: You can select different ringtones for the two SIM cards
in order to distinguish these better.
USING THE DISPLAY
Adjust the brightness of the display
1. Tap on the home screen on the menu key.
2. Select System settings > Display > Brightness.
3. To decrease the brightness, drag the slider to the left and to
increase the brightness, drag it to the right. The controller
disappears after a few seconds by itself.
NOTICE: There are two ways to adjust the brightness:
automatically or manually select. Enable Auto brightness when
the screen should be adapted to the energy consumption.
Set up the sleep mode
1. Tap on the home screen on the menu key.
2. Select System settings > Display > Sleep.
3. Select an option.
Set up ringer for incoming notifications / messages
1. Tap on the home screen on the menu key.
2. Select System settings > Sound.
3. Tap on Default notification sound.
4. Select a sound / ringtone for the notification.
5. Confirm with OK.
Set up DTMF tones
1. Tap on the home screen on the menu key.
2. Select System settings > Sound.
3. Activate the check box Dial pad touch tones and / or Touch
sounds.
SET UP VOLUME
When playing music or video, press the VOLUME button (up or
down) on the right panel to adjust the volume. A bar, which
displays the volume will appear on the screen.
You can change the media volume in the system settings as well:
1. Tap on the home screen on the menu key.
2. Select System settings > Sound > Volumes.
3. Move the slider for the corresponding app to the left or right
for volume up or down.
4. Tap on OK, to close the window.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
16 16
Set up vibration
1. Tap on the home screen on the menu key.
2. Select System settings > Sounds.
3. Activate the check box Vibrate when ringing and / or Vibrate on touch.
The phone vibrates now for incoming calls or when you tap on
the touch pad.
Stay awake function
Screen will never sleep while charging.
1. Tap on the home screen on the menu key.
2. Select System settings > Developer options.
3. Activate the check box Stay awake.
SET UP LANGUAGE
You can change the default language and Select a different one
and change it back later.
1. Tap on the homescreen on the menu key.
2. Select System settings > Language & input > Language.
3. Select the language you want to switch.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
17
PROTECTING YOUR PHONE
SET UP PIN CODE
You can protect your phone with a PIN code to prevent a
non-infringing use.
Activate your PIN
1. Tap on the home screen on the menu key.
2. Select System settings > Security.
3. Tap on Set up SIM/RUIM card lock.
4. Activate the check box Lock SIM card. You can lock both SIM1
and SIM2. Just tap the corresponding SIM card.
Change your SIM PIN
1. Tap on the homescreen on the menu key.
2. Select System settings > Security.
3. Tap on Set up SIM/RUIM card lock.
4. Tap on Change SIM PIN.
5. First enter the old PIN and confirm with OK.
6. Now enter the new PIN and confirm OK.
LOCK YOUR SCREEN
Protect your personal data and information by creating a screen
lock pattern, to prevent others may use your phone without your
permition.
This lock is acquired every time you turn on your phone or it was
in standby mode.
Enable screen lock
Press the power button to lock your display.
Set up a screen lock with PIN or password
1. Tap on the home screen on the menu key.
2. Select System settings > Security > Screen lock.
3. Select PIN or Password.
4. When prompted, enter a PIN or a password and confirm with
Next.
5. Enter the PIN or password again and confirm with OK.
Set up and use a lock screen pattern
You can set up a lock pattern in order to improve the security of
your phone. If you set up a pattern you will be asked to enter this
lock screen pattern to unlock your screen.
1. Tap on the home screen on the menu key.
2. Select System settings > Security > Screen lock.
3. Select Pattern.
4. Draw an unlock pattern. Connect at least points either
vertically, horizontally or diagonally to adjust your screen
lock pattern.
NOTICE: You must connect the dots pulling
together. The pattern is finished once you
release the points.
5. When prompted enter the pattern again
and tap Confirm.
NOTICE: You can reset the use of the screen lock pattern any
time if you do not want to continue using.
If entered a wrong screen lock pattern five times in a row, you
have to wait 30 seconds before you can enter it again.
MANAGING MEMORY
To see the available device memory
1. Tap on the homescreen on the menu key.
2. Select System settings > Storage.
MANAGE AND CLEAR INSTALLED APPS
To enhance your space, you can delete apps or applications that
you do not use on your device.
Delete application
1. Tap on the home screen on the menu key.
2. Select System settings> Apps > Manage apps.
3. Select an application that you want to delete. You can delete
applications that are currently being downloaded, that are
currently running and those that are on your SD card.
4. Tap on Uninstall and confirm with OK.
Change preferred install location
1. Tap on the home screen on the menu key.
2. Select System settings> Apps > Preferred install location.
3. You can now choose between internal and external memory
by tapping the desired location.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
18 18
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
19
SYSTEM UPDATES
Keep your device up to date to ensure an optimum performance
and the latest enhancements available.
For this, use the preinstalled System Update App to perform a
wireless update. You can update either via your mobile network
(this can cause significant costs depending on your contract) or a
wireless connection.
UPDATE WITH CAUTION
Improper operation or unpredictable external factors may
cause operating system update is not successful; the device will
not work properly. When such situation occurs, the device need
to be returned for repair.
Unofficial operating Software may cause security risks. Please
only use official released Software Updates by Phicomm,
otherwise the warranty and the right to claim under guarantee
is invalid.
SOFTWARE UPDATE
Users data will be erased during the update process, please
backup data beforehand.
Please make sure that the battery is charged above 30%.
Do no unplug the battery or the SD card during the update
process.
WIRELESS SYSTEM UPDATED
1. Backup your data.
2. Tap on the homescreeon on > System Update.
3. Tap on Remote Updates. The device now checks for updates. If
updates are available, you will be informed about the
adjustments in this new SW version. Now you can decide
whether you want to install the update or not.
4. Tap on the udpate file.
5. Confirm with Update, if you already backed up your data or if
not start the Backup to safe your data.
6. A reboot of the devices is needed to complete the system
update. Please confirm with OK. Das Gerät startet jetzt nee (see
also Further applications– Phicomm Backup).
SYSTEM UPDATE VIA USB CABLE
The manufacturer may publish a system update in individual cases
on the homepage as well. Plese inform yourself on
www.phicomm.de/Software-Updates, if an update is available for
your device.
1. Download the update file from the website to your computer.
2. Insert a SD card into your phone.
3. Backup your data.
4. Connect your Phicomm device via a USB cable with your PC.
5. Pull down the status bar.
6. Tap on Connected as … .
7. Tap SD card.
8. Copy the system update file to you Phicomm device into the
external memory.
9. Tap on the homescreen on > System Update.
10. Tap on Local updates.
11. Tap on the update file and confirm with OK. A reboot is
required to complete the system update.
BACKUP OF DATA
You can use the application Phicomm Backup to backup & restore
your data. Thus, certain settings and data can be restored after the
system update.
Data types that can be stored
With the Phicomm Backup app you can save the following data
types:
Bookmarks
Call log
contacts
SMS / MMS
System settings
Downloaded apps from the Google Play™ store
You don’t need to save music files, photosand videos taken with
the device camera as those files will be saved on the internal
memory card of your phone automatically.
NOTICE: When restoring Google Play™ apps additonal data
charges may incur.
Preparing for Backup & Restore
1. Tap on the homescreen on the menu key.
2. Select System settings > Backup & Restore.
3. Activate the check box Back up my data.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
20 20
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
21
4. Activate the check box Automatic restore, if not already
activated. You data will now be automatically restored after a
system update.
FACTORY DATA RESET
Resetting your phone deletes all data on the internal memory card
and phone memory, including dowloaded applications, and
enables the phone to its original state. Back up your data before
resetting your phone. To backup your data you can copy them to
your PC.
RESETTING THE PHONE
1. Tap on the home scree on the menu key.
2. Select System settings> Backup & reset.
3. Tap on Factory data reset.
4. When prompted, tap Reset phone and then tap Erase all. The
phone resets the settings to the original factory settings and
then restarts.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
22 22
E
NTERING TEXT
USING TOUCH KEYBOARD
When you start a programm or select a field that requires text or
numbers, the Android keyboard opens automatically.
SELECT KEYBOARD
The phone will automatically open and display the keyboard when
you want to enter text. You can select the keyboard language(s) as
following:
1. Tap on the home screen on the menu key.
2. Tap on System settings > Language & input.
3. Tap on next to Android Keyboard.
4. Tap on Input languages.
5. Select one or more languages.
6. Tap on the back key to return to the Languages & input menu
or tap on the home screen button to close the settings.
NOTICE: If you select more than one language, you can switch
between these languages while entering text.
SWITCH LANGUAGE WHILE TYPING
If you have selected more than one language as keyboard
language you can switch between those while entering text.
1. In entering mode tap on the space button on the keyboard.
2. Select a language. If you are missing a language you can tap on
Set up input methods and you will be prompted to the Android
Keyboard. Follow the instruction of SELECT KEYBOARD.
USING LANDSCAPE KEYBOARD
While entering text, you can rotate the device in landscape mode,
and keep writing. This function is set as default.
To change this function
1. Tap on the homescreen on the menu key.
2. Tap on display.
3. By tapping on the check box next to Auto-rotate screen you can
activate or deactivate this function.
ENTERING NUMBERS AND SYMBOLS
You can switch to the numberic mode for an more comfortable
way to enter numbers and common symbols such as parentheses,
currency sign, punctuation marks, and special characters. Just tap
on . To return back just tap the button again.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
23
C
ALL MANAGEMENT
MAKING PHONE CALLS
You can dial a number directly, or use a number from your call
history or contacts or call a stored contact.
MAKE A CALL BY DIALING A PHONE NUMBER
1. Tap on the home screen on Phone.
2. Tap on ..
3. If the keyboard does not appear automatically, tap on .
4. Type in the phone number. To delete a number tap on ,
to delete the complete phone number press and hold .
5. Tap on .
NOTICE: The phone has a dual
SIM card system. In case of
non-selection a SIM card, the
phone assumes the standard SIM card to make the call.
MAKE A CALL BY USING THE CONTACTS
1. Tap on the home screen on Phone.
2. Tap on .
3. Select a contact from the list.
MAKE A CALL BY USING THE CALL HISTORY
1. Tap on the home screen on Phone.
2. Tap on .
3. Tap on missed call to call back.
NOTICE: If no SIM card is inserted or outgoing calls were blocked,
you still can make an emergency call.
ACCEPT OR REJECT AN INCOMING CALL
ACCEPT AN INCOMING CALL
Press and hold and move it to the right to accept the call.
NOTICE: If you recieve a call from an existing contact, the number
and name will be displayed. If you get a call from someone who is
not in your contacts, you will see the standard layout and number
(if the caller is not suppressing his number).
REJECT AN INCOMING CALL
Press and holf the and move it to the left.
MUTE YOUR RINGTONE
To mute your phone without refusing the caller, simply press the
volume button and adjust the volume on quietly.
USING CALL OPTIONS
During the call tap on the menu key to get the dialog window.
With the hold button calls can be maintained.
USING THE PHONE NUMBER IN A TEXT MESSAGE
You also can call a phone number directly from a text message.
1. Open the message.
2. Tap on the number in the text message.
3. Tap on .
4. Select the SIM card the call should be made from.
CALL FOR EMERGENCY ASSISTENCE
1. Tap on the homescreen on Phone.
2. Tap on .
3. If the keyboard does not appear automatically, tap on .
4. Enter the international emergency number for your country
and, and tap on . To delete a number tap on , to
delte the complete number press and hold .
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
24 24
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
❶
❷ ❸ ❹ ❺ ❻
❼
25
NumberFunction
❶Ending a call
❷Open dial-keypad
❸Activate speakerphone
❹Microfone on / off
❺Interrupt call
❻Initiate a conference call
❼Shows what SIM card you are using for the call
SWITCH ON / OFF SPEAKER DURING A CALL
1. Tap on ❸ to activate the speaker. The icon will be highlighted
with a blue bar when activated.
2. Tap again on ❸, to deactivate the speaker. The blue bar
disappears when the speaker is turned off again.
WARNING
ear, do not kep your ear directly to the activated
speaker.
MUTE PHONE DURING A CALL
1. Tap on ❹, to run off microfone. The icon will be highlighted
with a blue bar when muted.
2. Tap again on ❹, to deactivate mute function. The blue bar
disappears when mute function is turned off.
PUT A CALL ON HOLD
1. Tap on ❺, to interrupt the call. The icon will be highlighted
with a blue bar when call is on hold.
2. Tap again on ❺, to continue the call. The blue bar disappears
when call continues.
END A CALL
Tap on ❶ to end the call.
If the number is not stored in your contacts, you can find it in the
call history and add it to your contact list after you hang up.
TO USE CALL HISTORY
The symbol will appear in the status bar when you missed a
call. You can use the call history to check / edit missed calls,
incoming and outgoing calls.
!!!!
To prevent potential damage to your
USE THE CALL HISTORY
1. Tap on the home screen on Phone.
2. Tap on . You will get an overview of missed, outgoing
and incoming calls.
3. Tap on next to the number / name, to make a call.
4. Press and hold the pictures space holder to add to contacts.
5. Tap on to send a text message to this contact.
NOTICE: The phone will recall on the current SIM card by
default, if you use the call history directly.
CLEAR THE CALL HISTORY
Follow the next steps to clear the call history:
1. Tap on the home screen on Phone.
2. Tap on . You will see and overview of all missed, incoming
and outgoing calls.
3. Tap on the menu key > Clear call log to delete the whole list.
4. To delete a single call tap on the call and then tap on the menu
key.
5. Tap on Remove from call log.
MULTIPLE CALLS
If you enabled the call waiting function you can perform multiple
calls simultaneaously. You will get an alert about another incoming
call with a beep.
ACTIVATE CALL WAITING SERVICE
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Dual SIM settings.
3. Tap on the SIM card you would like to activate the call waiting
service.
4. Tap on Call settings > Additonal settings.
5. Tap on Call waiting, to activate / deactivate this service. A
checkmark in the check box means that this service is activated.
NOTICE:
Not all mobile phone contracts can execute the call waiting
service.
The phone is operating with dual SIM standby. It can handle
multiple calls at a time on the same SIM card, but not both
SIM card simultaneously. If you make a call on SIM 1 you can
answer or make a call on SIM 2 at the same time.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
26 26
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
27
ANSWER FURTHER CALL / CURRENT CALL ON HOLD
C
all settings
your selected SIM card
ringing
IP call settings
Edit the IP prefix for IP call
Voicemail
Set up your voicemail
connections established
Quick responses
Reply with quick responses
Fixed Dialing Numbers
Limit your
phone numbers
Forward when unreachable
like Caller ID or call waiting
If you hear repeaded beeps during a call, slide up the phone
symbol on the display to the right to answer the new incoming call.
The first call will remain in holding position.
MAKE A FURHTER CALL
1. Tap on to add another call participant while you are in a
call.
2. Enter the number and tap on . The device is operating
with dual SIM standby. Please select the SIM card you started
the conference call.
3. When the recipient replies, the first call is put on hold.
PRIVATE CONVERSTATION WITH A CONFERENCE CALL
PARTICIPANT
1. While you are in a conference call tap on Manage conference.
You will see all participants.
2. Tap on on the left side of the participant. The other
participant(s) we be put on hold.
3. If you want to merge the participants and return to the
conference call tap on .
END A CONFERENCE CALL
While you are in a confrence call tap on the red phone.
SWITCH BETWEEN DIFFERENT CALLS
Tap on the desired number / contact to switch to the other call.
The current call is on hold in the meantime.
END CURRENT CALL / RETURN TO THE CALL ON HOLD
Tap on the red phone to end the call and return to the next call
that is on hold.
CONFERENCE CALL
A conference call allows you a conversation with two or more
persons.
START A CONFERENCE CALL
1. During a call tap on to add a participant.
2. Enter the number and tap on . The device is operating
with dual SIM standby. Please select the SIM card you started
the conference call.
3. When the recipient replies, the first call is put on hold.
4. Tap on to lead the calls together..
Repeat point 1 to 4 to add furhter participants.
REMOVE PARTICIPANTS FROM CONFERENCE CALL
1. While you are in a conference call tap on Manage conference.
You will see all participants.
2. Tap on the red phone next to the participant you want to
remove from the conference call.
TO ADJUST CALL SETTINGS
You can customize your call settings like voicemail or call
forwarding service. To access to the call settings,
1. Tap on the homescreen on the menu key.
2. Select System settings> Dual SIM settings.
3. Tap on the SIM card you would like to set up.
4. Tap on call settings.
Phone ringtone Set the ringtone you want for
Vibrate when ringing Activate the check box if the
phone should vibrate when
Vibrating after connection Activate the check box if the
phone should vibrate after
Call forwarding Set up your phone to: Always
forward, Forward when busy,
Forward when unanswered,
Additional settings Enable or disable phone services
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
28 28
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
29
SWITCH ON / OFF PHONE FUNCTIONS
When you enable the airplane mode, all wireless connections on
the device will be turned off, including call function, Bluetooth and
WLAN.
ENABLE / DISABLE AIRPLANE MODE
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & networks > More …
3. Tap on Airplane mode to activate it. You will see the airplane
icon in the status bar.
NOTICE: When you disable the airplane mode, all previous
functions (incl. call function, Bluetooth and WLAN) will be
restored.
C
ONTACTS
You can use the contact app to manage your phone numbers,
emails and other contact information in one place.
TRANSFER CONTACT INFORMATION
There are several ways to transfer contacts to your new device.
Pick the most appropriate for you.
BY USING GOOGLE™
You can synchronize your device with different Google™ services.
You just need to have a Google™ account where all your data is up
to date.
Create a Google™ account
1. Tap on the homescreen on the menu key.
2. Select System settings> Add account > Google.
3. Follow the instructions to set up a Google™ account or login
into your Google™ account.
Synchronize your contacts with your Google™ account
1. Tap on the homescreen on the menu key.
2. Select System settings > Google.
3. Tap on the Google™ account you want to synchronize with. A
list with applications will be shown that can be synchronized.
4. Tap on Contacts. The data will be synchronized automatically.
USING A SIM CARD
To synchronize your contacts via a SIM card, you have to make sure
that all your contacts are stored on your SIM card. If this is not the
case you have to transfer them from your old phone to the SIM
card.
1. Tap on the homescreeon on Contacts.
2. Tap on the menu key.
3. Tap on Import / export.
4. Tap on Import from SIM card. If two SIM cards are inserted you
will be asked for the SIM card. Select one.
5. Select Phone to safe your contact on the phone.
6. Select the contacts you want to import or tap on Select All if
you want to import all.
7. Confirm with OK.
8. Confirm again with OK.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
30 30
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
31
BY USING A SD CARD
❸
❼
To synchronize your contacts by using a SD card you have to
transfer all your contacts to the SD card. Please make sure all
contacts are transferred from your old device to your sd card.
1. Tap on the homescreen on Contacts.
2. Tap on the menu key.
3. Tap on Import / export.
4. Tap on Import from storage.
5. Tap on Phone to safe your contacts in the phone memory and
choose Internal Storage.
6. Confirm with OK.
BY USING BLUETOOTH™
You can send your contacts via Bluetooth™ to your new device.
Please make sure that both devices to have the Bluettooth™
function and visibility enabled. Otherwise a transmission is not
possible.
1. Tap on the homescreeon on Contacts.
2. Tap on the contact you would like to transmit via Bluetooth™.
3. Tap on the menu key.
4. Tap on Share and then on Bluetooth.
5. Select the device you would like to transfer the contact to. If
there is no list please tap on Scan for device.
6. Accept the incoming file by taping on Accept.
7. The recieved contact information will be displayed as vCard
attachement in the status bar. Tap on vCard file to edit and save
it.
MANAGE CONTACTS
You can create, edit, and delte your contacts in a few simple steps.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
32 32
OVERVIEW CONTACT APP
❶
❺
❻
NumberFunction
❶Tab - Groups
❷Tab - Contacts
❸Tab - Favorites
❹Tap on contact to show contact details
❺Tap on picture to show quick contact menu
❻Search for contact s
❼Add contact
❽Alphabetical list to seachr for contacts
MANAGE CONTACTS
Show contacts
Tap on the homescreen on Contacts.
Add contacts
1. Tap on the homescreen on Contacts.
2. Tap on Add contact (❼).
3. If you have synchronized your contacts with more than one
account, select the account to which you want to add the new
contact to.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
❷
❹
❽
33
4. Enter the data.
5. Tap on Done.
2. Tap on the contact you want to add to favorites.
3. Tap on .
Edit contacts
1. Tap on the homescreen on Contacts.
2. Tap on the contact you want to edit and tap on .
3. Make your changes and confirm with Done.
Link a contact with a picture
1. Tap on the homescreen on Contacts.
2. Tap on the contact you want to add a picture to and tap on
3. Tap on and select a method to add a picture to your
contact.
4. After added the picture confirm with OK.
Show all communication with a contact
1. Tap on the homescreen on Contacts.
2. Tap on the contact you want to see the communication.
3. Tap on the communication symbols next to the number.
Delete contacts
1. Tap on the homescreen on Contacts.
2. Tap on the contact you want to delete.
3. Tap on the menu key and tap Delete.
4. Confirm with OK.
5. To delete more than one contact at the same time, tap on the
menu key in the contact overview list.
6. Tap on Delete.
7. Tap no the contact you want to delete or tap on Select All. The
check box will be marked.
8. Confirm your selection with OK.
9. Confirm to delete contacts with OK.
Edit own contact details
1. Tap on the homescreen on Contacts.
2. Tap on Contacts (❷).
3. Insert you data and confirm with Done.
FAVORITES
You can mark contacts as favorites to quickly access them via the
Favorites tab.
Add to favorites
1. Tap on the homescreen on Contacts.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
34 34
Show favorites
1. Tap on the homescreen on Contacts.
2. Tap on the tab Favorites (❸).
GROUPS
You can combine contacts in groups assign contacts to a group to
access quickly the selected contacts.
1. Tap on the homescreen on Contacts.
2. Tap on the tab Group (❶).
3. Tap on if you wan to use a default group.
4. Tap on if you want to create a new group. Insert group
name and confirm with OK.
5. Tap on a group and tap on Add members.
6. Select the group members by tapping on the name.
7. Confirm with OK.
8. To return to the contact list tap on the back key.
SEARCH CONTACTS
1. Tap on the homescreen on Contacts.
2. Tap on Search (❻).
3. Enter the first letters of the contact in the Find contacts field.
All contacts will be displayed that start with those letters.
TRANSFER CONTACTS
Send you vCard
1. Tap on the homescreen on Contacts.
2. Tap on your contact.
3. Tap on the menu key and tap on Share or Send contact via SMS.
4. Select a method and follow the instructions.
Send contacts
1. Tap on the homescreen on Contacts.
2. Tap on the contact you want to send.
3. Tap on the menu key and tap on Share or Send contact via SMS.
4. Select a method and follow the instructions.
Send all contacts at once
1. Tap on the homescreen on Cnotacts.
2. Tap on the menu key.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
35
3. Tap on Import / export.
4. Tap on Share visible contacts.
5. Select a method and follow the instructinos.
BACKUP CONTACTS
You can backup your contacts using a SIM card, a memory card or
a Google™ account.
Backup on SIM card
1. Tap on the homescreen on Contacts.
2. Tap on the menu key.
3. Tap on Import / export.
4. Tap on Export to SIM card. If you are using two SIM card in your
phone select the SIM card you would like to export your
contacts to and confirm with OK.
5. Select the contact(s) you want to backup on the SIM card by
tapping on them.
6. Confirm with OK.
Backup on SD card
1. Tap on the homescreen on Contacts.
2. Tap on the menu key.
3. Tap on Import / export.
4. Tap on Export to External Storage (SD card).
5. Select the contact(s) you want to backup on the SD card by
tapping on them.
6. Confirm with OK.
M
ESSAGING
USING SMS AND MMS
With the SMS (Short Message Service) you can use your phone to
send and receive text messages. If you subscription includes MMS
(Mulimedia Messaging Service) you can send and receive
messages that contain media file (e.g. pictures, videos). The
number of characters allowed in a single text message can vary
depending on the operator and the selected language. When
sending SMS / MMS charges apply.
NOTICE: You have to activate the Mobile Date to send MMS
(system seetings > Wireless & Networks > Mobile data > ON).
COMPOSE AND SEND MESSAGES
1. Tap on the home screen on Messaging.
2. Tap on Add message .
3. Enter the phone number of the recipient in the address bar.
The potential recipients from the contact will be displayed
while you are typing. To add a recipient from the contact list,
tap on and select the contact and confirm with OK.
4. Tap on Type message and enter your text.
5. If you want to add a media file tap on and select an
attachment type.
6. Tap on send . The phone is operating with
dual SIM; you can decide which SIM card should be used to
send the message.
SAVE MESSAGES AS DRAFT
A text message will automatically be saved as Draft after you
tapped on the back key. You will get the information “Message
safed as draft”. If you want to continue tap on the draft message in
the message list. The draft message is marked with “Draft”.
SHOW MESSAGES
1. Tap on the homescreen on Messaging.
2. Tap on a conversation to view the text.
NOTICE: Depending on your notification settings, the phone rings
or vibrates when recieving a message. The notification icon also
points to this new message. You can drag the status bar downward
and tapon the reveived message to view it.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
36 36
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
37
ANSWER MESSAGES
STORAGE
messages as limits are reached
conversation
limit
number of messages (50) per
conversation
TEXT (
SMS
) MESSAGES
message you send
Message template
Edit message template
messages
card
SMS SIGNATURE
signature
message
MULTIMEDIA (
MMS) MESSAGES
when there are multiple recipients
message you send
you send
displayed in the message list
function is enabled.
should be available
.
NOTIFICATIONS
bar
receive a message.
Vibrate
Select this option if you want your
1. Tap on the home screen on Messaging.
2. Tap on the message you would like to answer.
3. Enter your answer and tap on send . The
phone is operating with dual SIM; you can decide which SIM
card should be used to answer the message.
FORWARD MESSAGES
1. Tap on the homescreen on Messaging.
2. Tap on the conversation that includes the message you would
like to forward.
3. Press and holf the message and tap on Forward.
4. Tap on To and enter the pohne number either manually or
choose one from the contact list .
5. Edit the message and tap on send . The
phone is operating with dual SIM, you can decide which SIM
card should be used to forward the message.
DELETE MESSAGES
1. Tap on the home screen on Messaging.
2. You can choose between:
If you want to delete a message history, press and hold the
conversation, it will be marked. Tap on to delete the
conversation and confirm with Delete.
If you want to delete a single message, press and hold the
message to be deleted and select Delete. Confirm with
Delete.
MESSAGING SETTINGS
1. Tap on the homescreen on the Messaging.
2. Tap on the menu key > Settings.
3. Now the following settings can be made:
Delete old messages
Text message limit
Multimedia message
Select this option to delete old
Select this option to set the maximum
number of messages (500) per
Select this option to set the maximum
Delivery reports
Manage SIM card
SMS signature
Edit SMS signature
Group messaging
Delivery reports
Read reports
Auto-retrieve
Roaming auto-retrieve
Validity period
Notifications
Sound
Request a delivery report for each
Manage messages stored on your SIM
Select this option to enable SMS
Select this option to edit the SMS
signature to appear at the end of each
Use MMS to send a single message
Request a delivery report for each
Request a read report for each message
Select this option to automatically
retrieve all your MMS messages. This
option allows the automatic download
of content and file attachments from a
MMS. If you disable this function, only
the subject of the MMS is retrieved and
Select this option to automatically
receive MMS while you have the
roaming mode activated. Substantial
costs for traffic may incur when this
Select the time that the MMS content
Display message notifications in status
Select a ringtone to play when you
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
38 38
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
39
phone to vibrate when you receive a
new text or
multimedia
message.
SMSC
SETTINGS
provider for SIM1
provider for SI
M2
Set the slot1’s SMSC
number
Set the slot2‘s SMSC
number
Here you can enter the number of the
message center (SMSC) for your mobile
Here you can enter the number of the
message center (SMSC) for your mobile
E-M
AIL
With the Email app, you can manage multiple email accounts
simultaneaously. You can set up a business Microsoft Exchange™, a
private or your Google™ email account.
MANAGE YOUR EMAIL ACCOUNTS
SET UP AN EMAIL ACCOUNT
1. Tap on the homescreen on Email.
2. Follow the instructions to set up a email account. This
instructions will only appear if you don’t have set up any email
account yet.
NOTICE: If necessary you need to contact your Email service
provider to obtain information about the exact settings of your
email account.
SET UP EMAIL ACCOUTN AS DEFAULT
1. Tap on the homescreen on Email.
2. Tap on the menu key > Settings.
3. Select the account that you want to set as default account.
4. Activate the check box Default account. The inbox of that
account will be displayed each time you open the Email app as
a standard. If you have only one account, this is automatically
your default account.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
40 40
TO ADD FURTHER EMAIL ACCOUNTS
1. Tap on the homescreen on Email.
2. Tap on the menu key > Settings.
3. Tap on Add account.
4. Enter the email address and password and tap on Next.
5. For easier identification enter a name for your email account
when you are prompted. This name appears when sending
emails from this account.
6. When finished confirm with Next.
TO DELETE EMAIL ACCOUNTS
1. Tap on the homescreen on Email.
2. Tap on the menu key > Settings.
3. Tap on the email account you want to delete.
4. Scroll down the display and tap on Remove account.
5. Confirm with OK.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
41
USE EMAIL
COMPOSE AND SEND EMAIL
1. Tap on the homescreen on Email.
2. If you have set up several email accounts, tap the top of the
inbox and the select the account from which you want to send
the email.
3. Tap on .
4. Tap on To and start entering the recipient. Matches are
displayed in a dynamic list. Tap the desired recipient (match) or
proceed entering the email address. You can enter additional
addresses, which must be seperated by a comma (,) or a
semicolon (;).
5. You also can use an email address from your contacts. Tap
on . Tap the check box nex to the recipient(s) you want to
add and confirm with OK.
6. Tap on Subject and enter the subject text of the email.
7. Tap in the message filed and type your text.
8. If you want to add an attachment, tap on the menu key and
select Attach file.
9. To add Cc/Bcc addresses tap on the menu key and select Add Cc/Bcc.
10. Tap on , to send the email.
RECEIVE EMAILS
1. Tap on the homescreen on Email.
2. If you have set up several email accounts, tap the top of the
inbox and select the account you want to view your emails.
3. Tap on , to download new messages.
NOTICE: You can set the inbox check frequency for your emails.
The device automatically sychronizes your emails according to the
set frequency.
ADJUST FREQUENCY
1. Tap on the homescreen on Email.
2. Tap on the menu key > Settings.
3. Select the account you want to adjust the email frequency.
4. Tap on Inbox check frequency and select as wished.
2. If you have set up several email accounts, tap the top of the
inbox and select the account .
If you want to view your emails from all accounts at once, tap
on Combined view.
3. You now can scroll up or down the inbox. To view the disired
email tap on it.
ANSWER EMAILS
1. Tap on the homescreen on Email.
2. Select the email in your inbox you want to answer and tap
on .
3. Enter your text and tap on to send the email.
FORWARD EMAILS
1. Tap on the homescreen on Email.
2. Select the email in your inbox you want to forward and tap
on .
3. Tap on Forward.
4. Tap on To and enter the email address either manually or select
a contact from the cnotact list .
5. Enter your text and tap on to send the email.
DELETE EMAILS
1. Tap on the homescreen on Email.
2. Select the email in your inbox you want to delete and tap
on .
SHOW FOLDER FOR YOUR EMAIL ACCOUNTS
1. Tap on the homescreen on Email.
2. Select the account in your inbox you want to show the folders
for.
3. Tap on the inbox and tap on Show all folders or tap on .
SHOW EMAILS
1. Tap on the homescreen on Email.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
42 42
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
43
WLAN
You device can conncect via WLAN, GPRS/3G or EDGE to the
internet.
With WLAN, you can access the internet wirelessy over a distance
up to 100 meters from the router. To access the internet via a
wireless connection, you need to look for an available wireless
network and connect to this network. The strength of the signal
depends on several factors and may therefore vary.
TURN ON WIRELESS FUNCTION AND CONNCECT TO WIRELESS
NETWORK
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & Networks.
3. Activate WLAN by sliding the bar from OFF to ON to scan for
available networks in the area.
4. Select a network to which you want to connect. If you select
an unsecured network, you are automatically connected. If
you select a secured network, you have to enter the network
key. Once the connection is established, the WLAN icon
appears in the status bar .
Alternatively, you can also work with the status bar directly:
1. Wipe the status bar down and tap on .
2. Tap on WLAN.
3. Follow the step 5. and 6.
NOTICE:
Next time you use your device to detect Wi-Fi networks, you
will not be prompted to enter the network key of the
previously accessed Wi-Fi network (unless you perform a hard
reset which will erase custom settings on your device).
WLAN networks are self-discoverable, which means no
additional steps are required for your device to connect to a
WLAN network. It may be necessary to provide a username
and password for certain closed wireless networks.
SEARCH FOR WLAN NETWORK MANUALLY
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
44 44
3. Activate WLAN by sliding the bar from OFF to ON and then
tap on WLAN.
4. Tap the menu key and tap on Scan. The phone is now
searching for available WLAN networks and displays them in a
list.
5. Tap on the WLAN network you want to connect to and follow
the instructions.
WLAN-NETZWERK MANUELL HINZUFÜGEN
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks.
3. Activate WLAN by sliding the bar from OFF to On.
4. Tap on WLAN and then on Add network .
5. Enter the network SSID.
6. Tap on Security, to select a securty type
7. Enter the password if prompted.
8. Confirm with Save.
NOTICE: Contact your wireless network provider to obtain
information about the exact settings for the SSID network.
WLAN NETWORK STATUS
If you are connected to a WLAN network or when a WLAN
network is available within your each, you can view the status. You
can set up your phone to get a notification when an open WLAN
network is detected.
Status bar: Once you are connected to a WLAN network, the
WLAN icon appears and informs you about the signal strength .
If the WLAN notification is enabled, you will be automatically
informed by this symbol when an open network has been
detected.
ENABLE WLAN NETWORK NOTIFICATION
1. Turn on WLAN, if ist not already turned on.
2. Tap on the homescreen on the menu key.
3. Tap on System settings > Wireless & Networks > WLAN.
4. Tap on the menu key > Advanced.
5. Tap on the check box Network notification.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
45
SHOW DETAILED INFORMATION ABOUT THE ASSIGNED WLAN
NETWORK
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks > WLAN.
3. Tap on the WLAN network to which you are currently
connected. Detailed information about the network will be
displayed.
4. To close this information tap on Cancel.
DISCONNECT WLAN NETWORK
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & Networks > WLAN.
3. Tap on the WLAN network you want to disconnect.
4. Tap on Forget.
WLAN NETWORK IN STANDBY MODE
Enabling the wireless network in standby mode, you can specify
when to switch from WLAN to mobile data.
NOTICE: If you are not connected to a WLAN network, the phone
uses a mobile data connection to access the internet (if you have
set up and eabled a mobile data connection on your phone).
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks > WLAN.
3. Tap on the menu key > Advanced.
4. Tap on Keep WLAN on during sleep.
5. Select an option.
I
NTERNET BROWSER
You can start the browser to display web pages and navigate, set
booksmarks and save websites to read offline. The browser has
been optimized for ease of use. A connection to a 3G, GPRS or
WLAN network is required.
USE INTERNET BROWSER
OPEN INTERNET BROWSER
Tap on the homescreen on Browser.
ACCESS A WEB PAGE
1. Tap on the home screen on Browser.
2. Enter the internet address in the address field. As you type,
possible addresses automatically will be displayed. You can
select one or continue to enter your address
3. Confirm with Go.
NOTICE: Sometimes the search and address field is not
displayed automatically after the browser has been opened.
Strike down the top of the screen; the search and address field
will be displayed again.
SEARCH WEBSITE
1. Enter the keyword in the address field.
2. Confirm with Go.
SET UP HOMEPAGE
1. Tap on the menu button while you are on a website.
2. Tap on Homepage.
END BROWSER
Tap on the home button while surfing.
NOTICE: Even after a restart of the phone the most recently
used settings will be shown when you return to the browser.
BROWSER SETTING
You can customize the browser, for example, specify the
homescreen, set the font size or clear the cache, cockies, and
other data associated with the websites.
CHANGE BROWSER SETTINGS
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
46 46
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
47
1. Tap on the menu key while you are on a website.
2. Tap on Settings.
3. Make your changes and return with the return key.
CHANGE TEXT SIZE ON WEBSITES
1. Tap on the menu key while you are on a website.
2. Tap on Settings > Accessibility.
3. Make your adjustment and return with the return key.
CLEAR CACHE, COOKIES, HISTORY
1. Tap on the menu key while you are on a website.
2. Tap on Settings > Privacy & security.
3. Tap either on Clear cache / Clear history / Clear all cookie data and confirm with OK.
NAVIGATE THE BROWSER
ZOOM WEBSITE
You can choose two different ways to zoom in or out on a website:
1. Touch the area you would like to zoom with two fingers at
the same time. Pull apart with your fingers to zoom out and
pull your fingers together to zoom in.
2. Double-tap the screen to zoom in. To zoom out, double-tap
the screen again.
SAVE WEBSITES FOR OFFLINE READING
1. Tap on the menu key while you are on the website you wish
to save for offline reading.
2. Tap on Save for offline reading. The website will be saved in a
separate tab in the saved website overview.
SHOW SAVED WEBSITES
1. Strike down the screen while you are on a website.
2. Tap on .
3. Tap on . Different tabs will appear. Select Saved Pages.
4. Select the saved website you want to view.
OPEN THE LIVE-VERSION OF AN OFFLINE WEBSITE
1. If you have opened a website in offline reading mode, and
you want to display the live version now, tap on the menu
key.
2. Tap on Go live.
SHARE LINKS
1. Tap on the menu key while you are on the website you want
to share.
2. Tap on Share page.
3. Select one of the possible services and follow the
instructions.
CLOSE A WEBSITE
1. Strike down the screen while you are on a website, to open
the search and address field.
2. Tap on . You will get an overview of all open websites.
3. Tap on or strike the website to the left or to the right to
close it.
WORK WITH SEVERAL WEBSITES
You can open ob to 16 websites simultaneously on the web
browser. The switch between these windows is easy to handle and
makes a multiple use of the Internet possible.
OPEN NEW BROWSER WINDOW
1. Strike down the screen while you are on a website, to open
the search and address field.
2. Tap on .
3. Tap on . A new browser window will open.
SWITCH BETWEEN WEBSITES
1. Strike down the screen while you are on a website, to open
the search and address field.
2. Tap on .
3. You can scroll up and down to view the list of all open
websites. Wipe the sides to the left or to the right, to delete
them.
4. Tap on the website you would like to open.
MANAGE BOOKMARKS
You can use bookmarks to quickyl access your favorite pages.
Those can be added directly from the browser.
Depending on the network provider some bookmarks maybe
pre-installed.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
48 48
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
49
SET BOOKMARKS
1. Tap on the menu key while you are on the website you would
like to bookmark.
2. Tap on Save to bookmarks and follow the instructions.
OPEN BOOKMARKS
1. Tap on the menu key while you are on a website.
2. Tap on Bookmarks.
3. Tap on Local, if the bookmarks are not shown automatically.
4. Tap on the website you would like to open.
EDIT BOOKMARKS
1. Press and hold the website in the open bookmarks register
you want to edit.
2. A menu pops up. Tap on Edit bookmark.
3. Edit the bookmark and confirm with OK.
DELETE BOOKMARKS
1. Press and hold the website in the open bookmarks register
you want to delete.
2. A menu pops up. Tap on Delete bookmark.
3. Confirm with OK.
ADD BOOKMARKS TO HOMESCREEN
1. Press and hold the website in the open bookmarks register
you want to add to the home screen.
2. A menu pops up. Tap on Add shortcut to home and confirm
with OK.
MANAGE TEXT AND PICTURES
SEARCH TEXT ON A WEBSITE
1. Tap the menu button while you are on a website.
2. Tap on Find on page.
3. Enter the keyword into the Find on page field. Text /
characters that match your search will be highlighted.
4. To jump from one to the other element, tap on .
Arrow facing up takes you to the previous element and arrow
facing down to the next one.
5. Tap on to close the window.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
50 50
COPY TEXT
1. Press and hold a word of the text you want to copy until it
will be highlighted with a frame.
You now can move the tabs to the right or left to mark the
desired text.
2. Tap on and select Copy. The selected text is copied to
the clipboard.
3. To insert the text press and hold the text field in the
application (email, SMS or MMS) until Paste will appear. Tap
on Paste.
SAVE PICTURE
1. Press and hold the picture you want to save until a menu
pops up.
2. Tap on Save image.
3. The picture will be saved into the following path as default:
1. Tap on the menu key while you are on the website.
2. Tap on Settings > Advanced > Custom Download Path.
3. Select the path you would like to use as default and confirm
with OK.
ADVANCED BROWSER SETTINGS
In the advanced browser settings you can amongst others enable
plug-ins, set auto-scaling of websites or block pop-up windows.
ACTIVATE PLUG-INS
You can enable plug-ins in order to achieve optimal results
displaying websites. You can configure plug-ins only to be active
only on request, which increases the browser speed.
1. Tap on the menu key while you are on a website.
2. Tap on Settings > Advanced > Enable plug-ins.
3. Select a plug-in setting.
NOTICE: The browser may need to be restarted to activate the
made settings.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
51
AUTO-FITS PAGES
If autoscalling is enabled, the browser will adjust the size of text
and images automatically. If this function is not enabled, you may
need to scroll to the next page to get the complete text.
1. Tap on the menu key while you are on a website.
2. Tap on Settings > Advanced > Auto-fits pages.
POP-UPS
With this function you can block pop-ups.
1. Tap on the menu key while you are on the website.
2. Tap on Settings > Advanced > Block pop-ups.
B
LUETOOTH™ SETTINGS
Bluetooth™ is a wireless communication technology with short
range. Devices with Bluetooth™ capabilities can exchange data
easily over a distance of 8 meters. There should be no solid objects
in the line of sight between the two devices. You can enable the
visitbility of your device to be found by other devices.
TURN ON BLUTOOTH™ AND MAKE YOUR DEVICE VISIBLE
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & Networks.
3. Activate Bluetooth by sliding the bar from OFF to ON to can
for other available Bluetooth devices.
4. Tap on Bluetooth. You will see a list with all available
Bluetooth devices.
5. To make your device visible to others, tap the name of your
device. Tap on the name again and you device won’t be
visible any longer.
6. After you have turned on Bluetooth, the Bluetooth icon
appears in the status bar .
Alternatively, you can also work with the status bar directly:
4. Wipe the status bar down and tap on .
5. Tap on Bluetooth.
6. Follow the step 5. and 6.
FURTHER BLUETOOTH™ SETTINGS
You can change the name of your device, set the timeout for the
visibility or display obtained data.
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks > Bluetooth or
alternatively wipe the status bar down and tap on >
Bluetooth.
3. Tap on the menu key.
4. Choose between Rename phone, Visibility timeout und Show received files (you need to turn on Bluetooth for some
settings).
5. Make your adjustments.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
52 52
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
53
NOCTICE: Bluetooth™ is turned off by default. Turn Bluetooth™ off
when not using it to save power. Also turn it off in places where it
is prohibited to use Bluetooth™ (e.g. in airplanes or hospital).
PAIRING WITH OTHER DEVICES
You can use your phone with other Bluetooth™ devices such as a
Bluetooth™ headset or a Bluetooth™ hands-free. For the pairing of
the devices you may need a password. You can find this one in the
documentation of the device to be paired. This password is only
needed one time. Once you have paired with a device you do not
need to enter the password again. Otherwise you phone
automatically uses the general password “0000”.
PAIR DEVICES
1. Make sure that both phones do have turned on Bluetooth
and that both are visible to other devices.
2. Tap on the home screen on the menu key.
3. Tap on System settings > Wireless & Networks >Bluetooth
or alternatively wipe down the status bar and tap on >
Bluetooth. All available devices will be displayed.
4. Tap on the device you want to pair with.
5. If prompted enter the password or configure the same
password on both devices.
6. Tap on Pair. The devices are now paired.
UNPAIR DEVICES
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & Networks > Bluetooth
or alternatively wipe down the status bar and tap on >
Bluetooth.
3. Chose the paired device you want to unpair and tap on .
4. Tap on Unpair.
2. Sending device: Open the object you want to send.
3. Depending from the application from which you want to send
the item you need to either touch the object and hold or
press the menu button to send the item. Maybe there are
other sending methods as well.
4. Select the item and tap on Share, Send or Forward (icon) and
tap on Bluetooth™.
5. If prompted to use Bluetooth™ service tap on Turn on.
6. Tap on the name of the device you want to send the item to.
7. Receiving device: if prompted accept the connection.
8. Receiving device: If prompted confirm the file by tapping on
Accept.
SHOW RECEIVED ITEMS
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & Networks > Bluetooth
or alternatively wipe down the status bar and tap on and
then on Bluetooth.
3. Tap on the menu key and tap on Show received files.
SEND AND RECEIVE FILES
You can send and receive files via Bluetooth™, such as photos,
audio files, contacts or websites.
SEND FILES VIA BLUETOOTH
1. Receiving device: make sure Bluetooth™ is enabled and
visible for others.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
54 54
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
55
C
AMERA
TO TAKE PHOTOS AND VIDEOS
You can capture photos and videos with the build-in camera. You
can send those via MMS to friends or upload to other Web
Services. The phone also has a front camera that lets you take
selfies or hold conference calls easily.
CAMERA FUNCTIONS
Number Function
❶ Take photo / video (in video mode this icon is red)
❷ Photo / video mode
❸ View photos / videos
❹ Camera settings
❺ Effect
❻ Shot Mode
❼ Flash Mode
❽ Switch between front and back camera
❹ ❺
❸
❻
❶
❼
❽
❷
OPEN CAMERA APP
Tap on the homes screen on the Camera icon. The screen
orientation changes when you rotate the device in different
directions.
CLOSE CAMERA APP
Tap on the home screen or retrun key.
TAKE PHOTO
1. Tap on the camera app.
2. Tap on ❷ Photo mode.
3. Aim the camera at the subject.
4. Tap on ❶ take photo.
NOTICE: Keep the device vertically for portraits and horizontally
for landscape images.
TAKE VIDEO
1. Open the camera app.
2. Tap on ❷ video mode.
3. Aim the camera at the subject.
4. Tap on ❶ Take video, to start the recording.
5. Tap again on ❶, to stop the recording.
TAKE A SELFIE
1. Open the camera app.
2. Tap on ❽ Swicth between front and back camera.
3. Keep the camera pointed at yourself.
4. Tap on ❶ Take photo, to take a selfie.
VIEW PHOTS OR VIDEOS
1. Open the camera app.
2. Tap on ❸ View photos / videos.
3. Swipe to the left or right to scroll through your photos / videos.
USE FLASH
1. Open the camera app.
2. Tap on ❷ Photo mode.
3. Tap on ❹ Camera settings.
4. Navigate to the flash settings and select the desired setting.
5. Now take the photo. When flash is on the flash exposure
setting is displayed top left.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
56 56
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
57
DELETE PHOTOS OR VIDEOS
Vignette / Film Grain / Fisheye
Tint / Duo
-
tone / Doodle
S
harpen
① ② ④
1. Open the camera app.
2. Tap on ❸ View photo / video.
3. Select the photo / video you would like to delete.
4. Tap on the menu key.
5. Tap on Delete and confirm with OK.
CAMERA SETTINGS PHOTO MODE
Following camera settings can be set before you take a photo.
CAMERA SETTINGS
1. Tap on the camera app.
2. Tap on ❷ Photo mode.
3. Tap on ❹ Camera settings.
4. Select the setting you want to adjust and make the appropriate
changes for:
Location info
Silent Mode
Storage location (select between internal and external
storage)
Timer
Set shutter key
SET EFFECT
1. Open the camera app.
2. Tap on ❷ Photo mode.
3. Tap on ❺ Effect.
4. Select a setting you want to adjust and make the appropriate
changes.
SET SHOT MODE
1. Open the camera app.
2. Tap on ❷ Photo mode.
3. Tap on ❻ Shot mode.
4. Choose between Normal shot, Zero Shutter, Panorama, HDR
and Anti-shake.
SET FLASH MODE
1. Open the camera app.
2. Tap on ❷ Photo mode.
3. Tap on ❼ Flash mode.
4. Choose between Auto, On and Off.
You can turn on the flash when taking pictures with low light
conditions. Sometimes the pictures qualitity, even in poor light is
better without flash.
Auto (Standard)
The camera automatically detects whether a flash is
needed or not.
On
You can use the flash when the background is brighter
than your subject.
Off
The flash is turned off.
EDIT PHOTO
You can edit your photos after recording.
OVERVIEW PHOTO EDITING
Number Functions
① Fill light / Highlights / Shadows / Auto-fix
② Cross-process / Posterize / Lomo / Documentary /
③ Warmth / Saturation / B&W / Sepia / Negative /
④ Crop / Red Eye / Straigthen / Rotate / Flip /
TURN PHOTO
1. Open the camera app.
2. Tap on ❸ View photos / videos.
3. Swipe to the left or right to scroll through your photos / videos.
4. Tap on the menu key.
5. Select Rotate left or Rotate right. The photo rotates in the
direction you selected.
③
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
58 58
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
59
CROPPING PHOTO
1. Open the camera app.
2. Tap on ❸ View photos / videos.
3. Swipe to the left or right to scroll through your photos / videos.
4. Tap on the menu key.
5. Tap on Crop. You will see a blue frame with 4 fixing points.
6. Press and hold a fixing point and drag it into the desired
cropping direction.
7. After created the desired cut for your picture, tap on OK. If you
do not want to make the change, tap Cancel.
SET PICTURE AS
1. Open the camera app.
2. Tap on ❸ View photos / videos.
3. Swipe to the left or right to scroll through your photos / videos.
4. Tap on the menu key.
5. Tap on Bild Set picture as.
6. Select an application and follow the steps.
CAMERA SETTINGS VIDEO MODE
Following camera settings can be set before you make a video.
CAMERA SETTINGS
1. Open the camera app.
2. Tap on ❷ Video mode.
3. Tap on ❹ Camera settings.
4. Select the setting you want to adjust and make the
appropriate changes for:
Location info
Storage location (select between internal and external
storage)
Silent Mode
Video quality (HD, SD, VGA)
HD format: aspect ratio of 16:9 (1280x720 Pixel)
SD format: aspect ratio of 5:3 (800:480 Pixel)
VGA format: aspect ratio of 4:3 (640x480 Pixel)
4. Select a setting you want to adjust and make the appropriate
changes.
SET RECORDING MODE
1. Open the camera app.
2. Tap on ❷ Video mode.
3. Tap on ❻ Recording mode.
4. Choose between Normal recording and MMS recording.
SET FLASH MODE
1. Open the camera app.
2. Tap on ❷ Video mode.
3. Tap on ❼ Flash mode.
4. Choose between On or Off.
You can turn on the flash when taking pictures with low light
conditions. Sometimes the pictures qualitity, even in poor light is
better without flash.
On
You can use the flash when the background is brighter
than your subject.
Off
The flash is turned off.
SET EFFECT
1. Open the camera app.
2. Tap on ❷ Video mode.
3. Tap on ❺ Effect.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
60 60
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
61
G
ALLERY
You can view your videos or photos on the gallery app and share
them with others or set as wallpaper or caller image. A
appropriate selection appears when you tap on the menu button
while you are in the gallery app.
Select, inter alia, between:
ALBUMS: shows all photos and videos that have been recorded
with this device.
TIMES: shows all photos and videos in chronical order of
recording.
LOCATION: shows all photos and videos with location indicator.
Only those items will be shown where the function Location info has been enabled.
OPEN & CLOSE GALLERY
1. To open gallery tap on > Gallery.
2. To close gallery tap on the home or back key.
NOTICE: If the screen rotation does not change automatically
when turning sideways, please select Auto-rotate screen in the
display settings.
PHOTOS & VIDEOS
Your photos and videos can be displayed as thumbnails in a grid
view.
SHOW / PLAY ITEMS
1. Tap on the home screen on > Gallery.
2. Tap on Albums. All photos and videos are displayed in the
appropriate category (camera, screenshot, images from e-mail
or images from other application).
3. Tap on the thumbnail version of the catery to view the photos
in this category. Videos are marked with the play icon (arrow).
Swipe left or right to view all thumbnail images.
4. Tap a picture or video to view or play it.
5. Swipe to the left to view the next item and to the right to view
the previous one.
WORKING WITH PHOTOS
Yo can edit your photos for example to prune them, to assign to
contact pictures or to use them as wallpaper.
Zoom photos
If you double tap on a picture the zoom will be activated. Repeat
this command to disable zoom again. Alternatively, drag two
fingers apart to enlarge the image and pull the fingers together
again to zoom back out.
View photos in slide show
1. When viewing a photo, tap on the menu key.
2. Tap on Slideshow, to reproduce all photos in this album.
3. To exit, tap a photo.
Edit photos
1. Select the photo you want and display it.
2. Tap on the menu key.
3. Tap on Edit.
4. You can now set the brightness, FX mode, color as well as the
crop photo (more in chapter Camera > Edit photo).
Rotate photos
1. Select the photo you want to rotate.
2. Tap on the menu key.
3. Tap on either Rotate left or Rotate right.
Crop a photo
1. Select the photo you want to crop.
2. Tap on the menu key.
3. Tap on Crop. You will see a blue frame. Pull the marker points
either to reduce or to enlarge the image section and thus to cut
it.
4. Confirm with OK.
Set photo as
1. Select a photo.
2. Tap on the menu key.
3. Tap on Set picture as.
4. You can now select from the displayed applications (such as
contact picture or set as wallpaper). Now follow the
appropriate steps.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
62 62
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
63
Delete photos
1. Select the photo you want to delete.
2. Tap on the menu key.
3. Tap on Delete and confirm with OK.
Share photo
1. Select the photo you want to share.
2. Tap on the display to open the toolbar
3. Tap on and select the application with which you want to
forward your image. Now follow the appropriate steps.
NOTICE: Make sure tha you are contected to the online service you
want to use. Otherwise, this application will not be displayed.
WORKING WITH VIDEOS
You can download your recorded videos or forward it to friends by
uploading them to online services.
Play video
1. Open the album containing the video you want to play.
2. Select the video you want to play and tap on it.
3. Tap on to start playing the video.
Stop video
1. While playing the video tap the screen to display the controls.
2. Tap on the stop button.
Rewind back / fast forward
1. While playing the video tap the screen to display the controls.
2. Drag the progress bar to fast forward to the right and to the left
to rewind.
Share video
1. Select the video you want to share.
2. Tap the screen to siplay the toolbar, if not already open.
3. Tap on and select the application with which you want to
forward the video. Now follow the appropriate steps.
NOTICE: Some objects may exceed the maximum file size and
therefore can not be sent for transmitted.
NOTICE: Make sure tha you are contected to the online service you
want to use. Otherwise, this application will not be displayed.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
64 64
GROUP PHOTOS & VIDEOS
1. Tap the menu key while you are in the thumbnail view in the
Albums tap.
2. Tap on Select album*.
3. Select the photos and videos you want to group. Selected items
are marked with a blue frame.
4. Use the toolbar to work with the selected items (e.g. share with
others or Delete all.
*NOTICE: Alternatively, you also can touch the item / items and
hold to mark them with the blue frame.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
65
M
- Repeat is off
Equalizer settings
Song information (Interpreter / Album / Titel)
Elapsed time of current song
Total time of current song
Progress bar
ULTIMEDIA
PLAY MUSIC
MUSIC APP
You can transfer your music or audio books from your computer to
your smartphone and play them. Also purchased online and
downloaded music/ audio books easily can be listend and
arranged.
FUNCTIONS
❶
❷
❸
❹
❾
❽ ❻ ❼
❺
❿
⓫
NumberFunction
❶Open Playlist
❷Shuffle
Playback options:
❸
❹
❺
❻Go to the previous song of current playlist
❼Play or Pause
❽Go to the next song of current playlist
❾
❿
⓫
- Repeating all songs
- Repeating current song
Play track
1. Tap on the homescreen on > Music.
2. In the tab Songs, tap on the title you want to play.
Change track
Select function number ❻ or ❽ while the song is being played
to play the previous or next one.
Stop track
Tap on function number ❼.
Rewind back / fast forward music
1. Tap anywhere on the progress bar (⓫) or
2. Drag the blue dot to the left or to the right .
Shuffle
You can shuffle songs either in a playlist or album.
1. Tap on Playlist or Album.
2. Select the playlist or album that should be played in random
order.
3. Tap on the menu key and select Shuffle all.
4. Tap on function number ❷ to disable the shuffle.
Adjust volume
Press the volume control button (page 22).
Improve the sound quality
1. While playing a track tap on function number ❹.
2. Tap on the power button on the top-right.
3. Tap on Custom and pull the frequency band slider up or down
for manual adjustment or
4. Select a music style from the list of automatic adjustments.
Minimize music app
1. Tap the back key to return to the previous screen or
2. Tap the home key to open the homescreen. The track continues
in the background.
Activate music app
1. Drag the status bar downwards to open the notification panel.
2. Tap on the title to open the music app again.
Delete track
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
66 66
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
67
1. While playing a track tap on the menu key.
2. Tap on More.
3. Tap on Delete.
MANAGER PLAYLISTS
You can create playlists directly on your device.
Add track to playlist
1. While playing a track tap on the menu key.
2. Tap on Add to playlist.
3. Choose between Current playlist and New (a new playlist will
be created).
4. If you selected New type in the name for the new playlist when
prompted and tap on Save.
Delete track from playlist
1. Press and hold a track to delete it from the playlist.
2. Tap on Delete.
3. Confirm with OK.
Open playlist
1. Tap on the homescreen on > Music.
2. Tap on Playlists.
3. Tap the playlist you want to play.
Delete playlist
1. Tap on the homescreen on > Music.
2. Tap on Playlists.
3. Press and hold the playlist you want to delete.
4. Tap on Delete.
5. Confirm with OK.
USE AS YOUR RINGTONE
1. While playing a track tap on the menu key.
2. You can now choose between Use as ringtone 1 (for SIM card 1)
or Use as ringtone 2 (for SIM card 2).
COPY MUSIC TO SD CARD
1. Connect your device with a USB cable to your computer to
enable the USB memory.
2. Create a new folder on the microSD card.
3. Copy your music into the new folder.
4. After you copied the music, remove or quit from disk drive
and then safely remove the phone.
5. Disconnect your device from the PC.
WARNING: To prevent possible hearing damage, do not listen at
high volume levels for long periods. Permanent hearing loss may
occur if the receiver, headphones, speakerphone, or earpieces
are used at high volume. To protect you from damage, you will
get a warning on your device if the music is too loud.
CLOSE MUSIC APP
1. While playing a track tap on function number ❼.
2. Then tap on the home key.
RADIO APP
You can use the pre-installed radio app as traditional FM radio on
your device. You can search for stations, listen to them or save as
favorite.
To use the radio a headset are needed as they serve as an antenna.
You can then listen to the sound via speaker.
FUNCTIONS
❶
❿
❷
❸
❺
❻
❼
❽
❾
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
68 68
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
69
NumberFunction
❶ON / OFF radio
❷Switch between headphones and speaker
❸Scroll back in the frequency range
❹ ❼Set frequenzy
❺Next in the frequency range
❻Frequency bar
❽Favorites
❾Tune a station as favorite
❿Record button
START RADIO APP
1. Connect your headset or headphones to your device.
2. Tap on the homescreeon on > FM Radio. The available
radio stations are displayed when scrolling with ❸ or ❺.
SWITCH BETWEEN THE STATIONS
Slide your finger along the frequency bar (❻) or tap on ❸ or
❺.
1. Tap the menu key when radio app is open.
2. Tap on Settings.
3. Tap on Audio Output Mode.
4. Select by tapping either Stereo or Mono.
VIDEO PLAYER
Use the video player app to play movies and other video files that
are stored on your phone.
PLAY VIDEOS
1. Tap on the homescreen on > Video player.
2. Select a video category and scroll to the video you want to play.
3. Tap on to play the video.
4. You can either hide or open the controls by tappin the screen.
5. To stop the video tap on the stop button.
6. To rewind, drag the progress bar to the left to fast forward to
the right.
SELECT RADIO RANGE
1. Tap the menu key when radio app is open.
2. Tap on Settings.
3. Tap on Regional Band.
4. Select an option.
SET UP FAVORITES
1. Search the station you want to save as favorite.
2. Press and hold „+“ (❾) in Favorites (❽). Station will be
saved and displayed in the favorites bar.
EDIT FAVORITES
1. Press and hold the present station in the favorites bar til a
menu appears.
2. Select Delete, to remove station from Favorites.
3. Select Rename, to rename the station with a own choosen
name.
4. Select Replace, to replace this station with another one.
5. Select Tune, to adjust the station (if there are any problems
with the transmission).
MONO AND STEREO PLAYBACK
Your radio app has got a mono and stereo playback. In some
cases, the mono-mode lead to a reduction of the noise or to
improve the sound quality.
SHOW VIDEO DETAILS
1. Tap on the homescreen on > Video player.
2. Select a video category and scroll to the video you want to play.
3. Press and hold the video until a menu appears.
4. Tap on and then on Details, to view video details.
SHARE VIDEO
1. Tap on the homescreen on > Video player.
2. Select the video you want share and open it.
3. Press and hold the video until a menu appears.
4. Tap on and select the app with which you want to forward
/ share the video. Now follow the appropriate steps.
DELETE VIDEO
1. Tap on the homescreen on > Video player.
2. Select the video you want to delete and open it.
3. Press and hold the video until a menu appears.
4. Tap on .
5. Tap on Delete and confirm with OK.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
70 70
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
71
O
THER APPLICATIONS
CALENDAR
You can use the calendar app to enter events or personal
appointments. If you have a Google™ account, you can
synchronize your device calendar with your web calendar.
SET CALENDAR VIEW
1. Tap on the homescreen on > Calendar.
2. Tap the top left to select an option: Day, Week, Month or
Agenda.
OPEN AND SET ALARM CLOCK
1. Tap on the home screen on > Clock.
2. Tap on Add alarm.
3. Activate check box Turn alarm on.
4. Tap on Time and set the alarm by scrolling up or down the
fixed time.
5. Confirm with Done.
6. If necessary, edit the alarm settings (repetitions, ringtone,
vibrate).
7. Tap on OK.
SHOW SEVERAL CALENDARS
1. Tap on the homescreen on > Calendar.
2. Tap on the menu key and then Calendars to display.
3. Select a calendar.
NOTICE: Your Google™ account previously must have been
synchronized to see this calendar in the selection.
CREATE EVENT
1. Tap on the home screen on > Calendar.
2. Tap on the menu key on New event.
3. Enter the name, location and date / time of the appointment.
You also can do other adjustments like set reminders or
repetition.
4. Confirm with Done, when ready.
VIEW AND EDIT EVENT
1. Tap on the home screen on > Calendar.
2. Tap on the event you would like to view or edit.
3. Tap on , to edit the event.
4. Make your adjustments and tap on Done.
CHANGE CALENDAR SETTINGS
1. Tap on the home screen on > Calendar.
2. Tap on the menu key and then on Settings.
3. Make your adjustments in General settings.
ALARM CLOCK
You can use your device as an alarm clock, while using any set
alarm melody / noise stored on your device.
The alarm will ring also if your device is muted.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
72 72
DISABLE ALARM
1. Tap on the home screen on > Clock.
2. Search the alarm you want to disable by scrolling up or down
the list.
3. Tap on the alarm.
4. Deactivate the check box Turn alarm on.
5. Tap on OK.
EDIT ALARM SETTINGS
1. Tap on the home screen on > Clock.
2. Search the alarm you want to edit by scrolling up or down
the list.
3. Tap on the alarm.
4. Make your adjustments and confirm with OK.
DELETE ALARM
1. Tap on the home screen on > Clock.
2. Search the alarm you want to delete by scrolling up or down
the list.
3. Tap on the alarm.
4. Tap on Delete and confirm with OK.
SET RING TONE FOR ALARM
1. Tap on the home screen on > Clock.
2. Search the alarm you want to set the ringtone for.
3. Tap on the alarm.
4. Tap on Ringtone.
5. Select a ringtone and tap on OK.
6. Tap on OK.
SET RECURRENT ALARM
1. Tap on the home screen on > Clock.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
73
2. Search the alarm you want to adjust by scrolling up or down
the list.
3. Tap on the alarm.
4. Tap on Repeat.
5. Make your selection and tap on OK.
6. Tap on OK.
ENABLE VIBRATION
1. Tap on the home screen on > Clock.
2. Search the alarm you want to set vibration by scrolling up or
down the list.
3. Tap on the alarm.
4. Activate check box Vibrate.
5. Tap on OK.
TURN OFF / SNOOZE ALARM
1. Tap on Dismiss, to turn off the alarm.
2. Tap on Snooze, to put the alarm in snooze mode. A new
alarm will sound after 10 min.
SOUND RECORDER
You need to insert a microSD card to you use the sound recorder.
FUNCTIONS
❹
❺
❻
❶
❷
❸
NumberFunctions
❶Play
❷Recording
❸Pause Recording
❹Recording list
❺Recording time
❻Lights up when recording
RECORDING
1. Tap on the home screen on > Sound Recorder.
2. Keep your phone’s microphone near your mouth.
3. Tap on ❷ to start the recording.
4. Tap on ❸ to pause the recording.
5. Tap on to finish the recording. It will be saved
automatically.
6. Tap on ❶ to play the recording.
NOTES
Here you can create notes and set a reminder.
ADD NOTE
1. Tap on the homescreen on > Notes.
2. Tap on .
3. Tap the screen. A keyboard appears. Now you can enter the
note.
4. Tap on to mark the note with a color. Select a color.
5. Tap on to set a reminder for the note. By moving up or
down the year, month, day, hour and minute you can set the
reminder. Tap OK to confirm the setting.
6. Tap on to safe the note.
EDIT NOTE
1. Tap on the homescreen on > Notes.
2. Tap on the note you want to edit.
3. Tap on to mark the note with a color. Select a color.
4. Tap on to set a reminder for the note. By moving up or
down the year, month, day, hour and minute you can set the
reminder. Tap OK to confirm the setting.
5. Tap on to safe the note.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
74 74
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
75
DELTE NOTE
1. Tap on the homescreen on > Notes.
2. Tap on the note you want to delete
3. Tap on Delete and confirm with OK.
CREATE CATEGORY
You can organize your notes in categories to obtain a better
overview and structure.
1. Tap on the homescreen on > Notes.
2. Tap on New category.
3. Enter the name of the new category and confirm with OK.
You also can create a new category via the menu key > New
category.
EDIT / DELETE CATEGORY
1. Tap on the homescreen on > Notes.
2. Press and hold the category you want to edit.
3. A tool bar opens. Rename or Delete the category now.
MOVE NOTES INTO A CATEGORY
1. Tap on the homescreen on > Notes.
2. Press and hold a note you want to move into a category. A tool
bar opens and the note is marked.
3. Tap on Move and select the category you want to move the
note. Your note is now safed in the selected category.
CLOSE NOTES
Tap on the home key to close the notes app.
TASCHENLAMPE
Das Gerät verfügt über eine Taschenlappen-Anwendung, die es
Ihnen ermöglich bei Dunkelheit besser zu sehen.
1. Tap on the homescreen on > Flashlight.
2. Zum Einschalten schieben Sie den Regler der Taschenlampe
nach oben. Zum Ausschalten wieder nach unten.
3. Tippen Sie auf die Startbildschirmtaste, um die
Taschenlampen-Anwendung zu beenden.
CALCULATOR
The device does have a calculator app with which you can perform
comfortabely simple calculations.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
76 76
USE CALCULATOR
1. Tap on the homescreen on > Calculator.
2. Use the calculator app like an ordinary calculator.
3. To perform advanced mathematical arithmetic tap on the menu key > Advanced panel.
4. To return to the basic functions tap on the menu key > Basic
panel.
SET UP CALCULATOR
1. Tap on the homescreen on > Calculator.
2. Tap on the menu key on Settings.
3. Make your adjustments for Voice promt / Vibrate on keypress /
Theme.
4. Tap on the back key to return to the calculator.
CLOSE CALCULATOR
Tap on the home key to close the calculator app.
PHICOMM BACKUP
The device has its own backup app with which you can easily back
up your data at any time to restore them after a backup. The
Backup Manager gives you an overview of your backup activities.
CREATE BACKUP
1. Tap on the homescreen on > Phicomm Backup.
2. Tap on Create Backup.
3. Tap the application for which you want to create a backup. The
check box is selected. By touching the application the check box
is deactivated again.
4. Tap on Start Backup.
5. Confirm with Complete.
RESTORE BACKUP
1. Tap on the homescreen on > Phicomm Backup.
2. Tap on Restore Backup.
3. Tap on the backup you want to restore.
4. Tap on the application you want to restore. The check box is
selected. By touching the application the check box is
deactivated again.
5. Tap on Start Recover.
6. After successfull recovery tap on Done.
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
77
DELETE BACKUP FILE
1. Tap on the homescreen on > Phicomm Backup.
2. Tap on Backup Manager.
3. To delete all files, tap on and confirm with Delete.
4. To delete single backup files, tap on the file you want to delete
and tap on Delete.
T
ROUBLESHOOTING
When using the phone, you may come into some troubles. Here
are some solutions to soleve the problem.
No signal
Wait about two minutes after turning on the phone
You may lose signal in elevators or tunnels. Move your phone
to an open area.
You may be in a service area gap. The phone will receive signal
after entering a service area.
Forgot security PIN or PUK?
Contact your retailer or service provider for lost PIN, PUK or other
passwords.
Can’t dial after entering phone number?
Make sure to press dial button
Make sure you have not set call restrictions.
Call failure to a contact?
Make sure the phone number is saved correctly in your
address book.
If needed, reenter and save the number.
Can’t be heard by the other side during a call?
Make sure your speaker is not covered.
Make sure to hold the speaker near your mouth.
Make sure the correct usage of the headset.
Poor call quality
Make sure the internal antenna is not blocked.
The phone may lose receiving function where the signal is
weak.
Please try another place.
Have trouble with battery charging or the phone turns off when
charging?
Remove the phone from the charger, then reinstall and
recharge the battery.
Battery electrodes may be contaminated. Wipe the three gold
touch points with a soft cloth and try to charge the battery
again.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
78 78
Copyright @ 2014 Phicomm Europe GmbH – Print only for private use.
79
If the battery can’t be fully charged, dispose the old battery
properly and change a new battery.
The phone feels hot
When you open several apps at a time, the large power needed
may cause hotness. As in such case, no worry for – it causes no
influence on the operating time or performance of the phone.
Your phone can’t connect the internet?
Make sure you enter effective internet service provider
settings.
Make sure you are connected to a Mobile Service Providers
wireless network and an unimpeded signal.
You phone can’t pair with another Bluetooth device?
Make sure both Bluetooth functions are enabled.
Make sure the distance between the two devices is beyond
effective range not blocked by wall or other obstacles.
Make sure each device is visible.
Make sure the two devices are compatible with Bluetooth
wireless technology.
Make sure to enter correct passwords on both devices.
Can’t listen to music by remote Bluetooth headset?
Make sure the phone is connected to the headset.
Make sure he music format you are trying to listen to is
supported by the headset.
Make sure the distance between the headset and the device is
beyond effective range of Bluetooth device and not blocked by
walls or other obstacles.
Copyright @ 2014 Phicomm Europe GmbH - Druckausgabe nur für den privaten Gebrauch.
80 80
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.