![](/html/1b/1b29/1b295a076e11eb566be4db6bab8c0fd76b41dc779f5e13435793474eaf7f48da/bg1.png)
R
TE CH NO LO GY
WL-RX SUB · WL-3TX
WL-RX SUB
WL-3TX
(Optional)
Wireless Subwoofer Receiver
Wireless Transmitter
Owners Manual / Installation Instructions
DESCRIPTION
The WL-RX SUB receiver works with the WL-3TX wireless transmitter to make any powered
subwoofer with a line level input into a wireless sub. This transmitter and receiver
combination will accurately reproduce low-frequency sounds and music without interference
or compression over distances up to 150 feet. The receiver’s compact size allows for easy
and clean installation with almost any powered subwoofer. Multiple subs can be used in a
single system (by adding receivers), and multiple systems can be used in the same home or
building (by using 1-3 transmitters set to different channels).
Please note: While the effective range of the WL-3TX and WL-RX SUB is normally greater
than 150 feet, the range distance can be signicantly affected by walls, ceilings, and other
obstacles. Phase Technology recommends using the transmitter and receiver in either the
same or adjacent rooms for best results.
CONTENTS:
SAFETY PRECAUTIONS 2
WL-RX SUB INSTALLATION/SETUP 3
WL-3TX INSTALLATION/SETUP 3
MULTIPLE SUBWOOFERS 3
TROUBLESHOOTING 3
SPECIFICATIONS 4
WARRANTY 4
WL-RX SUB FEATURES:
•Designed for use with the PHASE TECHNOLOGY WL-3TX wireless multi-channel
transmitter
•Usable with most powered subwoofer
•Signal sensing auto link-up indicator
•Selectable wireless 3-channel operation
•Interference free 2.4 GHz operation
•Long range operation
•Wireless uncompressed audio streaming
•Line level subwoofer output connection
•Allows multiple receiver/subwoofer operation from one transmitter
•Allows up to 3 different systems to operate independently.
Phase Technology 8650 College Boulevard
Overland Park, Kansas 66210 (866) 663-9770
www.phasetech.com
An MSE Audio Group company www.mseaudio.com
![](/html/1b/1b29/1b295a076e11eb566be4db6bab8c0fd76b41dc779f5e13435793474eaf7f48da/bg2.png)
SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock, do not remove
cover (or back). No user-serviceable parts inside. Refer
servicing to qualied service personnel.
Explanation of Graphical Symbols
The lightning ash with arrowhead symbol, within an equilateral triangle,
is intended to alert you to the presence of un-insulated “dangerous
voltage: within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
!
1. Read Instructions - All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should
be adhered to.
4. Follow Instructions - All operating and other instructions should be followed.
5. Water and Moisture - The appliance should not be used near water - for example, near
a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6. Carts and Stands - The appliance should be used only with a cart or stand that is
recommended by the manufacturer.
PORTABLE CART WARNING
you to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
!
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does not
interfere with its proper ventilation. For example, the appliance should not be situated on
a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a
built-in installation, such as a bookcase or cabinet that may impede the ow of air through
the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as radiators,
stoves, or other appliances that produce heat.
10. Power Source - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
11. Power Cord Protection - Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed up or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
12. Cleaning - The appliance should be cleaned only as recommended by the
manufacturer.
13. Nonuse Periods - The power cord of the appliance should be unplugged from the
outlet when left unused for a long period of time.
14. Object and Liquid Entry - Care should be taken so that neither objects fall nor liquids
spill into the inside of the appliance.
15. Damage Requiring Service - The application should be serviced by qualied service
personnel when:
a. the power supply cord or the plug has been damaged,
b. Objects have fallen onto or liquid has been spilled into the appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or exhibits a marked change in
performance, or
e. the appliance has been dropped or the cabinet damaged.
16. Servicing - The user should not attempt to service the appliance beyond those means
described in the operating instructions. All other servicing should be referred to qualied
service personnel.
17. Grounding or Polarization - Precautions should be taken so that the grounding or
polarization means of an appliance is not defeated.
18. FCC Rules Part 15 Compliance - This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation. Changes
or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
(3) This device contains FCC ID:XCO-HSMD2DIA80 and IC:7756A-HSMD2DIA8.
(4) Power supply UL, CUL and FCC listed.
page 2