Phase Technology RS1001i-II User Manual

RS1001i-ll
Specifications: RS1001i-II
System Type
Impedance (nominal) Sensitivity dB @ 2.83V/1M Sensitivity dB @ 1W/1M Distance Factor Frequency Response (- 3 dB) Frequency Response (-10 dB) Max. Program Power Max. Continuous Power RMS Max. UL program power Max. Power SPL @ 1 M Max. SPL @ x% distortion Coverage Angle (-6 dB @ 2 kHz) Coverage Angle (-6 dB @ 10 kHz) Dire ct iv it y Fac to r (Q ) Directivity Index (DI) dB Tap Selector Transducer - Low Frequency Driver Transducer - High Frequency Driver Low Frequency Voice Coil Crossover Frequency Network Type: Low Pass Network Type: High Pass Enclosure Material Motor-board Grille Inputs Colors Height (SM = Height) Diameter (SM = Width) Weight Shipping Weight
Accessories
Included
Packaging
1
Impedance listed per IEC 60268-5 with a minimum less than 80% the nominal impedance
2
1w1m sensitivity determined using nominal impedance
3
Frequency response measured in half or full space as dictated by speaker mounting configuration
4
Max program power is 3 dB above max continuous power
5
Continuous power rating, EIA-426-B test
6
Max output based on max continuous power
7
Max useable SPL based on testing by NWAA Labs
1
2
3
4
5
6
7
Open-Ceiling Speaker
Technical Information for System Engineers
10” Subwoofer, open-ceiling, ported (150 Watt optional transformer for 25/70.7/100 Volt or 4 ohm direct) 4 ohm
93.5dB
90.5dB N/A 53 Hz - 120 Hz
3
40 Hz - 300 Hz 300w 150w 100w
112.5dB N/A N/A N/A N/A N/A 5-Position rotary switch with 4 ohm direct 1 x 254mm (10in) Polypropylene cone, butyl rubber surround N/A
35.0mm 1.38in
100.0 kHz 6dB per octave, 1st order N/A Injection molded ABS, glass fiber reinforced N/A Iridite-plated steel with powder-coat finish 4 Pin, 5mm Euroblock for individual or daisy chain connection Black or white
17.23 in / 437.6 mm
14.82 in / 376.4 mm
27.0 lb / 12.3 kg
32.5 lb / 14.8 kg
Hanging hardware, Euroblock connector & terminal weather boot 1 per box
Transformer Taps
70.7 V Output 100 V Output 25 V Output
150w 112.5dB
75w 109.5dB
38w 106.5dB
19w 103.5dB
150w 112.5dB
75w 109.5dB
38w 106.5dB
19w 103.5dB
9.5w 100.5dB
4.8w 97.5dB
2.4w 94.5dB
Key Features
• One 254 mm (10.0 in) polypropylene woofer mounted to a proprietary cast­aluminum M8
baffle and heat sink.
• Weatherized components for indoor & outdoor applications.
• Includes hanging hardware with aircraft cables and integrated SpeedClamp
self-locking cable grip for fast, easy & secure installation.
• Patented ZeroReflection
enclosure tech­nology for optimal sound reproduction & cabinet rigidity. Also includes Eurob­lock connector & terminal weather boot.
• Easy access 5-position selectable tap switch for 25, 70.7 and 100 Volt applica­tions with 4 Ohm bypass simplifies ordering and inventory tracking.
• Iridite-plated steel grille with protective powder-coated finish for lasting durability.
• 93.5 dB Sensitivity offers high-output capabilities & reduced amplification costs.
• UL 1480 rev. 5, CE approval (EMC Direc­tive 89/366/EEC, EN55020, EN55013), Mil­spec 810 & IEC529 approval pending.
• High-quality black or white paint finish. Custom paint colors optional.
Description
The RS1001i-II is a 10” subwoofer with an open-ceiling enclosure design that delivers additional low-end response (40 Hz) for satellite/subwoofer applications. The RS1001i-II speaker design incorporates a low-profile grille, 5-position tap switch with voice coil/4 Ohm direct. Hanging hardware is included & features Speed-
Clamp
self-locking cable grip for fast,
easy & secure installation.
Applications
Designed for indoor & outdoor back­ground subwoofer applications, the RS10 01i-II includes a single point mount­ing system for rapid open-ceiling installa­tions. True low-end response (40 Hz) and high sensitivity (90.5 dB 1W/1M) make the RS1001i-II ideal for additional bass response in retail, restaurants and other open-ceiling subwoofer applications.
© 2007 SoundTube Entertainment, Inc. All rights reserved. PN TS-RS801 REV 12.05.07
SoundTube continually develops new product innovations and improvements. Updates to existing products without prior notice are an example of SoundTube’s drive for constant improvement.
100.0
90.0
dBSPL
80.0
70.0
60.0
50.0 20
100
1K
10K Hz20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
50.0
40.0
Ohm
30.0
20.0
10.0
0.0
10 100 1K 10K Hz 20K
-108.0
-36.0
36.0
108.0
180.0
Deg
252.0
Impedance Phase
RS1001i-ll
Open-Ceiling Speaker
Technical Information for System Engineers
Frequency Response
Phase/Impedance Reponse
Patented SoundTube Technologies
SoundTube Entertainment is con­stantly developing new technologies that enhance audio product perfor­mance. SoundTube Entertainment inno­vations are protected by multiple U.S. & international patents, which explicitly cover SoundTube dispersion, enclosure & dome technologies. SoundTube Enter­tainment actively defends its patents in order to protect SoundTube resellers and end users.
Technical Data and Specification Tools
Technical Data
SoundTube Entertainment strives to provide complete and effective technical information and data to dealers, engi­neers and designers. All data are avail­able from SoundTube Entertainment or at www.soundtube.com.
Data Acquisition
All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measurement tech­niques, including Measured Length Sequence (MLS) and Time Delay Spec­trometry (TDS). Performance, develop­ment and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASE™ data are acquired through an automated TEF 20/Outline/EASE™ interface.
EASE™ Data
SoundTubeSPEC™
SoundTube speaker placement software.
– 3-D polar plots.
– Proprietary
Architectural Specifications
The loudspeaker shall consist of a 254 mm (10.0 in) low-frequency transducer with a low-pass filter installed in the ported enclosure. The low-frequency voice coil diameter shall be 35.0 mm (1.38 in).
Performance specifications of a typi­cal production unit shall be as follows: Useable frequency response shall extend from 40 Hz – 300 Hz (-10 dB, half space, no external equalization). Measured sensitivity (2.83 Volt input, 1 meter) shall be at least 93.5 dB. The speaker shall have a nominal impedance of 4 Ohms
Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com
Loading...
+ 2 hidden pages