Phase Technology IW-100, IW-200 Specifications

Phase Technology has solved the challenge. Now you can have the excitement of a large
subwoofer in any room – in a way that perfectly matches your unique home décor. The SUB 200
& SUB 100 Powered In-Wall Subwoofer Systems perform seamlessly, out of sight mounted in
any conventional wall while creating bass that’s so room-filling, guests will be searching for a
free-standing subwoofer. No matter what style your architecture, paint, or even wallpaper, these
subs disappear.

larger than life sound that’s
easy on the eyes

enhanced audio

installation ease

patented technology

The SUB 200 and SUB 100 Systems both
produce deep, floorshaking bass that takes any
home theater or sound system to the next level.
Each subs’ drivers operate in their own in-wall
enclosure box that provides the air volume
needed for rock-solid bass down to 25Hz (IW-

200). The included 200-watt P200 amp, the
largest in its category, has 3 modes and an
equalization circuit to tune the bass to any
acoustical environment.

The subs’ enclosure include steel mounting
straps that secure into standard 16” center
framing. Each box’s ultra-slim 3 3/8” depth fits
into any architecture, and its surrounding layer of
vibration-isolating foam keeps walls from rattling.
Installation is a snap and the system’s grilles and
frames can be painted or even wallpapered to
disappear in any interior design.

Each woofer driver is made from mica/graphite
polypropylene, a material rigid enough to
withstand the pressures of hard-hitting, explosive
low frequency sounds, yet light enough to
maintain the foot-tapping rhythm of the original
musical recording. The SUB 200 System’s frame
utilize Phase Technology’s patented Positive
Clamping mounting system.

Woofer Dual 8” Mica/Graphite 7” Mica/Graphite

Polypropylene Cones Polypropylene Cone

Frequency Response 25-160 Hz (±3 dB) 30-160 Hz (±3 dB)

Enclosure Dimensions 72”H x 14 3/8”W x 3 3/8”D 42”H x 14 3/8”W x 3 3/8”D

Cutout Dimensions 20 1/2”H x 8 3/4”W 11 5/8”H x 8 1/2”W

Mounting Dimensions Enclosure mounts between Enclosure mounts between

16” on center 2 x 4 16” on center 2 x 4
studded wall; 3.5”D studded wall; 3.5”D

Weight 51 lbs. (in enclosure) 36 lbs. (in enclosure)

Recommended Room Size 1800 - 3300 cubic ft. Up to 1800 cubic ft.

• The SUB 200 & SUB 100 in-wall systems reproduce the room-shaking effects you feel as well as
hear, in any room without altering its aesthetic design

• The SUB200 System includes the IW-200 subwoofer, IW-EB200 Enclosure Box, and P200 amp.
The SUB100 System includes the IW-100 subwoofer with enclosure, and P200 amp.

All components can be purchased individually

• The SUB 200’s dual 8” and SUB 100’s single 7” drivers, with their massive motor structures,
create deep, accurate bass that equals the performance of the finest free-standing subwoofers

• Each sub enclosure box, with its incredibly slim 3-3/8” depth, mounts easily between standard
wall studs, and its vibration-isolating outer foam layer virtually eliminates the risk of buzzing
and wall rattling

• The P200 Amplifier is the largest in its category delivering 200 watts rms / 350 watts peak

• With the amp’s built-in equalization circuit, level control, and variable crossover, the sub can be
tuned to any room’s environment

• 10-year Phase Technology warranty on subwoofers, 3-year warranty on amplifier (see warranty for
complete coverage)

Model IW-200 Subwoofer Model IW-100 Subwoofer

Specifications

•

200 watts / 350 watts peak

•

Three modes (Sub, LFE and Wide-Range)

•

User-adjustable gain control matches the sub to any
system’s efficiency

•

Internal crossover range from 40 – 160 Hz, 0º/180º phase switch

•

Variable Low Frequency Boost from -3 dB to +6dB allows for
tuning to any room’s acoustics

• Dimensions/Weight: 17.75”W x 1.875”H x 11.75”D; 18 lbs.

For Product and Local Dealer Information:

1-888-PHASE TK www.phasetech.com

Phase Technology Corporation
6400 Youngerman Cricle
Jacksonville, FL 32244

Model

P200 External Amplifier

Model IW-200

Subwoofer

shown above