Phase Linear UDV7 Owners Manual
UDV7
Instruction Manual
Manual de Instrucciones
Guide d'instructions
CONTENTS
Thank you for choosing a Phase Linear product. We hope you will find the instructions in this
owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll
learn how to use all the features of your new Phase Linear UV7 Mobile Multimedia AM/FM/
DVD Receiver for maximum enjoyment.
Preparation.......................................................................................................... 1
Features........................................................................................................................ 1
Tools and Supplies........................................................................................................ 1
Optional Accessories .................................................................................................... 1
Disconnecting the Battery ............................................................................................. 2
Installation........................................................................................................... 5
Pre-installation .............................................................................................................. 5
Wiring............................................................................................................................ 5
Final Installation ............................................................................................................ 5
Final ISO-DIN Installation.............................................................................................. 5
Controls and Indicators...................................................................................... 6
Button Operation........................................................................................................... 6
LCD Display/Indicators.................................................................................................. 8
Remote Control................................................................................................... 9
Using the TFT Monitor...................................................................................... 11
Open/Close TFT Monitor............................................................................................. 11
TFT Monitor Auto Open .............................................................................................. 11
Monitor Tilt Angle Adjustment ..................................................................................... 11
Aspect Ratio................................................................................................................ 11
Image Setting.............................................................................................................. 11
Parking Brake.............................................................................................................. 11
Monitor Movement Mechanism................................................................................... 11
Operating Instructions ..................................................................................... 12
Power On / Off ............................................................................................................ 12
Audible Beep Confirmation ......................................................................................... 12
Mute ............................................................................................................................ 12
Playing Source Selection ............................................................................................ 12
Volume Adjustment..................................................................................................... 12
Audio Control Menu .................................................................................................... 12
System Reset.............................................................................................................. 12
Line Mute .................................................................................................................... 12
System Setup Menu.......................................................................................... 13
General Setup Menu................................................................................................... 13
ASP (Audio Sound Processing) Config Menu............................................................. 14
Exiting the System Setup Menu.................................................................................. 14
AM/FM Tuner Operation ................................................................................... 15
Tuner TFT Display ...................................................................................................... 15
Tuner LCD Display...................................................................................................... 15
Switch to Radio Tuner source ..................................................................................... 15
Select FM/AM Band .................................................................................................... 15
Seek Tuning................................................................................................................ 15
Manual Tuning ............................................................................................................ 15
Using Preset Stations.................................................................................................. 15
Auto Store (AS)........................................................................................................... 15
Local Radio Station Seeking (LOC) ............................................................................ 15
DVD/VCD Video Operation............................................................................... 16
Opening/Closing the TFT Video Screen ..................................................................... 16
DVD LCD Display........................................................................................................ 16
Inserting a Disc ........................................................................................................... 16
Ejecting a Disc ........................................................................................................... 16
Reset the Loading Mechanism................................................................................... 16
Controlling Playback .................................................................................................. 16
Accessing the DVD Menu .......................................................................................... 16
Moving Through Chapters.......................................................................................... 16
Goto Search ............................................................................................................... 16
Direct Chapter / Track Selection ................................................................................ 17
Viewing an Alternate Picture Angle (DVD Only) ........................................................ 17
Zooming ..................................................................................................................... 17
Multi-Language Discs (DVD Only) ............................................................................. 17
PBC (Play back Control) (VCD Only)......................................................................... 17
Playback Information.................................................................................................. 17
General Disc Information ........................................................................................... 18
DVD/Disc Setup Menu...................................................................................... 19
Accessing the DVD Setup Screen ............................................................................. 19
LANGUAGE Menu ..................................................................................................... 19
VIDEO Menu .............................................................................................................. 19
AUDIO Menu ............................................................................................................. 19
RATING (Parental Lock) Menu .................................................................................. 19
DVD/Disc Audio Operation.............................................................................. 21
Controlling Playback .................................................................................................. 21
MP3/WMA Operation ................................................................................................. 21
iPod Operation.................................................................................................. 22
Accessing iPod Mode................................................................................................. 22
Controlling your iPod.................................................................................................. 22
XM® Radio Operation....................................................................................... 23
Accessing XM®Radio Mode ...................................................................................... 23
Displaying the Identification (ID) Code....................................................................... 23
Selecting a Station ..................................................................................................... 23
Preset Mode............................................................................................................... 23
Channel/Category Guide Mode.................................................................................. 23
Direct Tuning.............................................................................................................. 23
XM Setup Menu ......................................................................................................... 24
Troubleshooting............................................................................................... 25
Error Messages.......................................................................................................... 26
Care and Maintenance............................................................................................... 27
Specifications................................................................................................... 28
12 Month Limited Warranty ............................................................................. 28
CONTENIDO
Gracias por elegir los productos Phase Linear. Esperamos que encuentre en este manual
instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá
cómo utilizar todas las funciones de su nuevo radio Phase Linear para su máximo
entretenimiento.
Preparation........................................................................................................ 29
Características ............................................................................................................ 29
Herramientas y Provisiones ........................................................................................ 29
Accesorios Opcionales................................................................................................ 30
Desconexión de la Batería.......................................................................................... 30
Instalación ......................................................................................................... 33
Preinstalación.............................................................................................................. 33
Cableado..................................................................................................................... 33
Instalación Final .......................................................................................................... 33
Instalación del ISO-DIN Final...................................................................................... 33
Controles e Indicadores................................................................................... 34
Botones de Operación ................................................................................................ 34
Pantalla LCD/Indicadores ........................................................................................... 36
Control Remoto................................................................................................. 37
Utilización del Monitor TFT.............................................................................. 39
Abrir/Cerrar el Monitor TFT......................................................................................... 39
Abrir Automáticamente el Monitor TFT ....................................................................... 39
Ajuste de Ángulo de Inclinación del Monitor ............................................................... 39
Proporción de la Imagen............................................................................................. 39
Proporción de la Imagen............................................................................................. 39
Freno de Mano............................................................................................................ 39
Mecanismo de Movimiento de Monitor ....................................................................... 39
Instrucciones de Operación............................................................................. 40
Encendido / Apagado.................................................................................................. 40
Confirmación Bip Audible............................................................................................ 40
Mute ............................................................................................................................ 40
Selección de Fuente de Reproducción ....................................................................... 40
Ajuste de Volumen...................................................................................................... 40
Menú de Control de Audio .......................................................................................... 40
Reinicio del Sistema.................................................................................................... 40
Enmudecedor de Línea............................................................................................... 40
Menú de Configuración de Sistema................................................................ 41
Menú de Configuración General ................................................................................. 41
Poniendo en Hora el Reloj .......................................................................................... 42
Menú de Configuración de ASP.................................................................................. 42
Saliendo del Menú de Configuración de Sistema ....................................................... 42
Operación del Radio......................................................................................... 43
Pantalla del Sintonizador de TFT................................................................................ 43
Pantalla LCD del Radio............................................................................................... 43
Cambio a Fuente de Radio ......................................................................................... 43
Selección de Banda FM/AM........................................................................................ 43
Búsqueda de Sintonía................................................................................................. 43
Sintonía Manual .......................................................................................................... 43
Utilizando Estaciones Configuradas Previamente ...................................................... 43
Almacenamiento Automático (AS) .............................................................................. 43
Buscador de Estaciones de Radio Local (LOC).......................................................... 43
Operación del Video de DVD/VCD................................................................... 44
Abriendo / Cerrando la Pantalla de Video TFT ........................................................... 44
Pantalla LCD del DVD................................................................................................. 44
Insertar un Disco ........................................................................................................ 44
Eyectar un Disco ........................................................................................................ 44
Reinicie el Mecanismo de Carga ............................................................................... 44
Controlando la Reproducción..................................................................................... 44
Accediendo al Menú DVD .......................................................................................... 44
Moviéndose a Través de Capítulos............................................................................ 44
Búsqueda Goto .......................................................................................................... 45
Capítulo Directo / Selección de Pista......................................................................... 45
Viendo un Ángulo de Imagen Alterno (DVD Solamente) ........................................... 45
Zoom (Acercamiento de imagen)............................................................................... 45
Discos con Lenguaje Múltiple (DVD Solamente) ....................................................... 45
PBC (Control de Reproducción) (VCD Solamente) ................................................... 45
Información de Reproducción .................................................................................... 45
Información de Disco General.................................................................................... 46
Menú de Configuración del DVD/DISCO ........................................................ 47
Accediendo a la Pantalla de Configuración de DVD.................................................. 47
Menú LANGUAGE (Lenguaje) ................................................................................... 47
Menú VIDEO .............................................................................................................. 47
Menú de AUDIO......................................................................................................... 47
Menú RATING (Bloqueo de Padres).......................................................................... 47
Operación del Audio de DVD/Disco................................................................ 49
Controlando la Reproducción..................................................................................... 49
Operación MP3/WMA ................................................................................................ 49
Operación de iPod............................................................................................ 50
Al Modo del iPod del Acceso ..................................................................................... 50
Controlar su iPod ....................................................................................................... 50
Operation de la Radio XM
Accessing XM®Radio Mode. ..................................................................................... 51
Exhibir el Código de la Identificación ......................................................................... 51
Selecting a Station ..................................................................................................... 51
Preselección de Memoria Automática........................................................................ 51
Modo de la Guía del Canal/Categoría........................................................................ 51
Seleccione Directamente una Estación ..................................................................... 52
XM Menú Setup ......................................................................................................... 52
®................................................................................................... 51
Solución de Problemas.................................................................................... 53
Mensajes de Error...................................................................................................... 54
Cuidado y Mantenimiento .......................................................................................... 55
Especificaciones .............................................................................................. 56
Garantia Limitade de 12 Meses....................................................................... 56
TABLE DES MATIÈRES
Merci d'avoir choisi un produit Phase Linear. Nous espérons que vous allez trouver les
instructions dans ce guide de propriétaire claires et faciles à suivre. Prenez quelques minutes
à le consulter, vous apprendrez à utiliser toutes les fonctions de votre nouvelle radio Phase
Linear pour en tirer une jouissance maximum.
Preparatifs ......................................................................................................... 57
Fonctions..................................................................................................................... 57
Outils et matériel ......................................................................................................... 57
Accessoires facultatifs................................................................................................. 58
Débranchez la pile ...................................................................................................... 58
Installation......................................................................................................... 61
Pré-installation ............................................................................................................ 61
Câblage....................................................................................................................... 61
Installation finale ......................................................................................................... 61
Installation finale ISO-DIN........................................................................................... 61
Controles et indicateurs................................................................................... 62
Opération par bouton .................................................................................................. 62
Affichage/indicateurs LCD........................................................................................... 64
Telecommande.................................................................................................. 65
Utilisation de moniteur TFT ............................................................................. 67
Ouvrir/fermer le moniteur TFT..................................................................................... 67
Ouverture automatique du moniteur TFT.................................................................... 67
Ajustement d'angle d'inclination du moniteur .............................................................. 67
Rapport largeur/longueur ............................................................................................ 67
Réglage d'image ......................................................................................................... 67
Freins de stationnement.............................................................................................. 67
Mécanisme du mouvement du moniteur..................................................................... 67
Instructions d'operation................................................................................... 68
Puissance en marche/en arrêt .................................................................................... 68
Confirmation du bip sonore......................................................................................... 68
Muet ............................................................................................................................ 68
Sélection de la source de reproduction....................................................................... 68
Ajustement du volume................................................................................................. 68
Menu contrôle d'audio................................................................................................. 68
Réinitialisation du système.......................................................................................... 68
Muet de ligne............................................................................................................... 68
Menu configuration systeme ........................................................................... 69
Menu configuration générale....................................................................................... 69
Ajuster l'horloge .......................................................................................................... 70
Menu configuration ASP (traitement de son audio) .................................................... 70
Sortir du menu configuration système......................................................................... 70
Operation tuner AM/FM.................................................................................... 71
Affichage tuner TFT .................................................................................................... 71
Affichage aux cristaux liquides tuner........................................................................... 71
Changer à la source tuner radio.................................................................................. 71
Sélectionner la bande AM/FM..................................................................................... 71
Rechercher la syntonisation........................................................................................ 71
Syntonisation à la main............................................................................................... 71
Utilisation des stations pré-réglées ............................................................................. 71
Auto stockage (AS) ..................................................................................................... 71
Recherche station de radio locale (LOC).................................................................... 71
Operation video DVD/VCD ............................................................................... 72
Ouvrir/Fermer l'écran vidéo TFT ................................................................................. 72
Affichage aux cristaux liquides DVD ........................................................................... 72
Insérer un disque ....................................................................................................... 72
Ejection d'un disque ................................................................................................... 72
Réinitialiser le mécanisme de chargement ................................................................ 72
Contrôler la reproduction............................................................................................ 72
Accéder au menu DVD .............................................................................................. 72
Se déplacer à travers les chapitres............................................................................ 73
Recherche allez à (GOTO) ........................................................................................ 73
Chapitre direct/sélection de piste ............................................................................... 73
Visionner un angle de l'image alternatif (seulement DVD)......................................... 73
Zoom .......................................................................................................................... 73
Disques multi-langues (Seulement DVD)................................................................... 73
PBC (Contrôle de la reproduction) (Seulement VCD)................................................ 73
Information de la reproduction ................................................................................... 73
Information générale du disque.................................................................................. 74
Menu de configuration DVD/disque................................................................ 75
Accéder à l'écran configuration du DVD .................................................................... 75
Menu LANGUAGE ..................................................................................................... 75
Fonction menu video.................................................................................................. 75
Menu audio ................................................................................................................ 75
Menu classement (verrouille parental) ....................................................................... 75
Operation audio DVD/DisQUE......................................................................... 77
Contrôler la reproduction............................................................................................ 77
Opération MP3/WMA ................................................................................................. 77
Operation iPod.................................................................................................. 78
Accéder à la mode iPod ............................................................................................. 78
Contrôler votre iPod ................................................................................................... 78
Operation radio XM
Accéder à la mode radio XM
Affichage du code d'identification............................................................................... 79
Sélectionner une station............................................................................................. 79
Mode de pré-réglage.................................................................................................. 79
Mode de guide chaîne / catégorie.............................................................................. 79
Syntonisation directe.................................................................................................. 80
Menu configuration XM .............................................................................................. 80
®................................................................................................................ 79
® ........................................................................................................... 79
Depannage........................................................................................................ 81
Messages d'erreur...................................................................................................... 82
Soin et Entretien......................................................................................................... 83
Specifications................................................................................................... 84
Garantie limitée de 12 Mois.............................................................................. 84
UV7
PREPARATION
Congratulations on your purchase of the Phase Linear UV7
Mobile Multimedia Receiver.
It’s a good idea to read all of the instructions before beginning
the installation. We recommend having your Phase Linear
UV7 installed by a reputable installation shop.
Features
DVD
• Compatible formats: DVD-R, DVD-RW, DVD+R,
DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, SVCD,
VCD and MPEG1, MPEG2 and JPEG
• Region 1 playback
• 16:9 Aspect ratio - Normal / Cinema
• Front panel DVD control
• High-speed Fast Forward / Fast Rewind 2X, 4X, 8X, 32X
• Play, Pause, Stop, Slow
• Chapter Up / Down
• Wolfson Microelectronics high performance 24-bit, 192
kHz DAC supports 2-channel "Down-Mix” audio modes
• 16Mbit high-speed flash memory - 80nS access time
MP3/WMA
• GIGA MP3 - Store up to 999 MP3 files on a DVD
• ID3-tag compatible
• Direct track access
• Play, Pause, Stop, Track Up / Down
• 100 second (MP3), 200 second (WMA) ESP - Electronic
Skip Protection
CD
• CD-text compatible
• 4 second ESP - Electronic Skip Protection
AM/FM Tuner
• US/Euro/Latin/Asia Tuner
• 30 Station presets (18FM/12AM)
• JENSEN Plus Tuner II
Outboard Media Module
• XM Radio and iPod
XM Ready
• Requires Optional Terk XMD1000 Tuner Box
• Requires Optional Terk XMDJEN100 or Jensen JXMC XM
Cables
• Advanced display shows the artist, song title, and XM
channel and category at a glance
• Direct Channel entry
Made for iPod
• Controls and charges all iPod's except "Shuffle"
• Displays all text information including category, track
name, artist and channel number
Chassis
• 7-inch TFT active-matrix LCD, 336, 960 pixels (1440W X
234H)
• Full automatic motorized TFT LCD flip-out and up
• 16-step TFT LCD tilt adjustment
• Beep Tone confirmation
• Heat management system - Incorporates forced aircooling to keep the chip-sets operating at nominal
temperatures
• Heavy duty galvanized chassis
General
• Full function infrared remote control
• 1 NTSC composite video output for additional screens
• OSD- On Screen Display menu control
• High performance audio processor
• Electronic volume, bass, treble, balance and fader
• Bass center frequency adjustment - 60, 80, 100, 130,
150 and 200Hz
• Bass Q factor - 1.0, 1.25, 1.5 and 2.0
• Treble center frequency adjustment - 10, 12.5, 15 and
17kHz
• Subwoofer crossover - 80, 120 and 160Hz
• Subwoofer Phase - 0, 180 degrees
• Subwoofer level - variable
• 100-ohm low impedance preamp outputs - all channels
• 5V Peak / 2V RMS RCA outputs - all channels
• 1-pair Front RCA outputs
• 1-pair Rear RCA outputs
• Single Subwoofer RCA output
• 1-pair Auxiliary RCA A/V inputs
• Flex fader
• Front panel (when screen is closed) high contrast LCD
• Rotary encoder audio control
• Joystick menu navigation
Tools and Supplies
You will need these tools and supplies to install your UV7:
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench
set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
WARNING! Only connect the unit to a12-volt power
supply with proper grounding.
WARNING! Never install this unit where operation and
viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except
when using for rear view video camera) never use the
video display function while driving the vehicle. This is a
violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.
WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
WARNING! Using an improper fuse may cause damage
to the unit and result in a fire.
WARNING! To prevent damage to the screen, avoid
touching it with your fingers or other objects.
WARNING! The monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do not push, pull or swivel the monitor manually.
Optional Accessories
iAUX3 READY (Sold Separately)
• Can connect to any portable media device or multimedia
device using a standard 3.5mm plug.
• Converts 3.5mm auxiliary input to RCA stereo outputs for
easy connection to the radio’s auxiliary inputs.
UV7
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and
remove the negative (-) battery cable prior to installation.
NOTE: If the UV7 is to be installed in a car equipped with
an on-board drive or navigation computer, do not
disconnect the battery cable. If the cable is
disconnected, the computer memory may be lost. Under
these conditions, use extra caution during installation to
avoid causing a short circuit.
UV7
WIRING DIAGRAM
UV7
WIRING DIAGRAM - MULTIMEDIA CONNECTIONS
*TERK XMDJEN100 cables (sold separately)
**TERK XMD1000 Direct Tuner and antenna (sold
separately)
UV7
INSTALLATION
Pre-installation
1. Press the metal levers on both sides to remove the halfsleeve from the radio.
PREPARE RADIO
2. Install the half-sleeve.
a. Install adaptor if necessary (optional).
b. Install half-sleeve into adaptor or dashboard (only use
the supplied screws). Do not force the sleeve into the
opening or cause it to bend or bow.
c. Locate the series of bend tabs along the top, bottom
and sides of the mounting sleeve. With the sleeve fully
inserted into the dashboard opening, bend as many of
the tabs outward as necessary so that the sleeve is
firmly secured to the dashboard.
d. Install support strap to make the unit more stable.
INSTALL HALF SLEEVE
CAUTION! Be careful not to damage the car wiring.
3. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.
Wiring
Complete wiring as illustrated in the wiring diagrams on
pages 3 and 4. Once the wiring is complete, reconnect the
battery negative terminal. If there is no ACC available,
connect the ACC lead to the power supply with a switch.
NOTE: When replacing a fuse, be sure to use correct
type and amperage to avoid damaging the radio. The
UV7 uses one 15 amp mini-ATM fuse, located in the black
filter box in-line with the main wire harness.
Final Installation
After completing the wiring connections, turn the unit on to
confirm operation (ignition switch must be on). If unit does not
operate, recheck all wiring until problem is corrected. Once
proper operation is achieved, turn off the ignition switch and
proceed with final mounting of the chassis.
1. Connect wiring adaptor to existing wiring harness.
2. Connect antenna lead.
3. Carefully slide the radio into the half-sleeve making sure
it is right-side-up until it is fully seated and the spring
clips lock it into place.
NOTE: For proper operation of the CD/DVD player, the
chassis must be mounted within 20° of horizontal. Make
sure the unit is mounted within this limitation.
5. Replace any items you removed from the dashboard.
FINAL INSTALLATION
Final ISO-DIN Installation
1. Remove trim ring.
2. Mount factory brackets on new radio using existing
screws from old radio.
3. Slide radio chassis into dash opening and secure.
4. Reinstall dash panel.
FINAL ISO-DIN INSTALLATION
4. Attach one end of the perforated support strap
(supplied) to the screw stud on the rear of the chassis
using the hex nut provided. Fasten the other end of the
perforated strap to a secure part of the dashboard either
above or below the radio using the screw and hex nut
provided. Bend the strap to position it as necessary.
CAUTION! The rear of the radio must be supported with
the perforated strap to prevent damage to the dashboard
from the weight of the radio or improper operation due to
vibration.
UV7
CONTROLS AND INDICATORS
Button Operation
1. OPEN
Press the OPEN button (1) to activate the automatic
mechanical system and move the TFT monitor into viewing
position. Press again to close the TFT.
2. WIDE/PICTURE
Press the WIDE/PICTURE button (2) to adjust the display
aspect of the picture to one of three settings: Cinema, Full or
Normal. Press and hold to access picture settings.
3. ( )
Press the button (3) to adjust the upward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the upward tilt or picture settings.
4. ( )
Press the button (4) to adjust the downward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the downward tilt or picture settings.
5. DISP
Press the DISP button (5) to display system information on
the screen.
6. VOL/LOC/DX
Rotate the VOL/LOC/DX knob (6) to adjust the volume.
Press and release to enter and/or confirm audio settings.
Press and hold to activate the Local (LOC) setting.
7. POWER/MUTE
Press the POWER/MUTE button (7) once to turn the unit on.
Press again to mute the volume. Press and hold to turn the
unit off.
NOTE: The UV7 features Softmute, which will allow the
volume to increase or decrease gradually when the
MUTE function is activated or deactivated.
8. 1/AUDIO
DVD Mode: Press to select audio language during playback.
TUNER Mode: Press once to play preset radio station
channel 1. Press and hold to store the current radio station in
preset channel 1.
9. 2/SUBTITLE
DVD Mode: Press once to select the subtitle language during
playback.
TUNER Mode: Press once to play preset radio station
channel 2. Press and hold to store the current radio station in
preset channel 2.
UV7
CONTROLS AND INDICATORS
10. 3/SCN
DVD Mode: Press once to start scan playback.
TUNER Mode: Press once to play preset radio station
channel 3. Press and hold to store the current radio station in
preset channel 3.
11. 4/R EP
DVD Mode: Press once to start repeat playback.
TUNER Mode: Press once to play preset radio station
channel 4. Press and hold to store the current radio station in
preset channel 4.
12. 5/RDM
DVD Mode: Press once for random playback.
TUNER Mode: Press once to play preset radio station
channel 5. Press and hold to store the current radio station in
preset channel 5.
13. 6/STOP
DVD Mode: Press once to stop playback.
TUNER Mode: Press once to play preset radio station
channel 6. Press and hold to store the current radio station in
preset channel 6.
14. BAND
TUNER Mode: Press to switch between FM and AM.
15. SRC
Press once to select playing mode.
16. ( )
DVD Mode: Press once to play back previous chapter/track.
TUNER Mode: Press once to auto search for the previous
available radio station.
MENU Mode: Press once to move the cursor to the left.
17. ( )
DVD Mode: Press once to enter the next chapter or track.
TUNER Mode: Press once to auto-search the next available
radio station.
MENU Mode: Press once to move the cursor to the right.
18. ( )
DVD Mode: Press once for fast forward.
TUNER Mode: Press to go up one frequency step.
MENU Mode: Press once to move the cursor up.
MENU Mode: Press once to move the cursor down.
20. PLAY/ENTER
DVD Mode: Press once to start a playback.
Press once to confirm a selection.
21. ( )
Press once for disc insertion/ejection.
Press and hold to reset core mechanism position.
22. RESET
Press to reset system settings to factory default (except the
password and parental lock setting).
23. LCD Display
24. TFT Display
25. IR Remote Control Receiver
26. AS (Auto Store)
Press to auto store strong radio stations in the six preset
channels in the current band.
19. ( )
DVD Mode: Press once for slow forward.
TUNER Mode: Press to go down one frequency step.
UV7
CONTROLS AND INDICATORS
LCD Display/Indicators
1. Disc Indicator
Illuminated when disc is loaded
2. DVD Playback Indicators (SCN/RPT/RDM/ALL)
The following DVD playback indicators become Illuminated
when the corresponding function is active:
• SCN: scan playback
• RPT: repeat playback
• RDM: random playback
• ALL: playback all chapters
3. Loudness Indicator (LOUD)
The loudness indicator becomes illuminated when the LOUD
function is activated.
4. Main Display
The main display is an 8 digit, 14 segment LCD which
displays the time, tuning frequency and other text
information.
5. Channel/Disc Display
The channel/disc display is a 2 digit, 7 segment LCD display
which displays the disc number or radio channel indicators
when the corresponding function is active:
• CH: radio is activated
• DISC: DVD/CD mode is activated
6. Stereo/Local Indicator
The stereo/local indicator illuminates one of the following
indicators when the corresponding function is active:
• ST: radio is in stereo mode
• LOC: local radio station seeking function is activated
1 2 3 4 5 6
UV7
REMOTE CONTROL
Table 1: Remote Control Functions
Button Function
Name/Ref # DVD VCD AM/FM CD/MP3 XM iPod
MENU 1 Enters the main
TITLE 2 Enters the title
MUTE 3 Toggles on/off
POWER
AUDIO 5 Changes the
REPT A B 6 Setup to repeat
REPT 7 Repeats playback
SRC 8 Selects playing
SUBTITLE 9 Language selec
DISP 10 Displays playing
ANGLE 13 Plays back disc in
VOL
VOL + 16 Increases volume Increases volume Increases volume Increases volume Increases volume Increases volume
menu of the disc
menu of the disc
audio output
4 Turns the power
on/off
audio language
for disc playback
playback from
time frame A to
time frame B
of current chapter
mode
tion for subtitle
information
different angle for
a scene
14 Fast forwards the
disc content
15 Decreases vol
ume
17 Selects the previ
ous chapter for
playback
18 Pauses playback/
starts playback
Turns on PBC
when playing VCD
Plays first ten sec
onds of each
chapter/title
Toggles on/off
audio output
Turns the power
on/off
Setup to repeat
playback from
time frame A to
time frame B
Repeats playback
of current chapter
Selects playing
mode
Displays playing
information
Plays back Picture
CD with different
angle of picture
displayed
Fast forwards the
disc content
Decreases vol
ume
Selects the previ
ous chapter for
playback
Pauses playback/
starts playback
Toggles on/off
audio output
Turns the power
on/off
Selects playing
mode
Displays playing
information
Decreases vol
ume
Searches an
available radio
station by
decreasing tuning
frequency
Scans FM/AM
radio station;
plays/stores radio
station; deletes
radio station
Toggles on/off
audio output
Turns the power
on/off
Repeats playback
of current track
Selects playing
mode
Display playing
information
Fast forwards the
disc content
Decreases vol
ume
Selects the previ
ous track for play
back
Pauses playback/
starts playback
Displays XM
Setup Menu
Toggles on/off
audio output
Turns the power
on/off
Selects Category
Mode
Selects playing
mode
Displays playing
information
Decreases vol
ume
Searches an
available radio
station by
decreasing tuning
frequency
Scans XM radio
station; plays/
stores radio sta
tion; deletes radio
station
Selects Photo
mode
Selects Music
mode
Toggles on/off
audio output
Turns the power
on/off
Selects Video
mode
Repeats playback
of current track
Selects playing
mode
Display playing
information
Accesses iPod
Menu
Decreases vol
ume
Pauses playback/
starts playback
NOTE: Your remote control may differ slightly
from the one pictured here. The above diagram is
for illustrative purposes only.
UV7
Table 1: Remote Control Functions
Button Function
Name/Ref # DVD VCD AM/FM CD/MP3 XM iPod
19 Selects the next
chapter for play
back
BAND 20 Stops playback Stops playback Selects FM/AM
GOTO 21 Goes to specific
ZOOM 23 Zooms in/out on
PIC 24 Displays set up
OPEN/
CLOSE
WIDE 28 (For DVD, SD
0, 1, 2, 3, 4,
7, 8, 9,
5, 6,
0 (Numeric
Keypad)
DVD
SETUP
SYS
SETUP
SCAN 34 Plays the first ten
EJECT 35 Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc
time frame and
playback
22 Slow Playback/
Rewinds playback
an image
parameters
25 Opens/Closes the
TFT monitor
26 Decreases moni
tor tilt angle
27 Increases monitor
tilt angle
card with Video,
Camera, and AUX
IN) Selects dis
play mode: CIN
EMA, NORMAL or
OFF
29 Directly accesses
chapter
30 Displays DVD
Setup menu
31 Displays System
Setup menu
Selects the next
chapter for play
back
Goes to specific
time frame and
playback
Slow Playback/
Rewinds playback
Zooms in/out on
an image
Displays set up
parameters
Opens/Closes the
TFT monitor
Decreases moni
tor tilt angle
Increases monitor
tilt angle
Selects display
mode: CINEMA,
NORMAL or OFF
Displays DVD
Setup menu
Displays System
Setup menu
Searches an
available radio
station by increas
ing tuning fre
quency
band
Opens/Closes the
TFT monitor
Decreases moni
tor tilt angle
Increases monitor
tilt angle
Selects display
mode: CINEMA or
OFF
1 6 selects preset
for current band
Displays DVD
Setup menu
Displays System
Setup menu
Selects the next
track for playback
Stops playback Selects XM, XM1,
Opens/Closes the
TFT monitor
Decreases moni
tor tilt angle
Increases monitor
tilt angle
Selects display
mode: CINEMA,
NORMAL or OFF
Directly accesses
track
Displays DVD
Setup menu
Displays System
Setup menu
seconds of each
track
Searches an
available radio
station by increas
ing tuning fre
quency
XM2, or XM3
band
Opens/Closes the
TFT monitor
Decreases moni
tor tilt angle
Increases monitor
tilt angle
Selects display
mode: CINEMA or
OFF
1 6 selects preset
for current band
Displays DVD
Setup menu
Displays System
Setup menu
Selects the next
track for playback
Opens/Closes the
TFT monitor
Decreases moni
tor tilt angle
Increases monitor
tilt angle
Selects display
mode: CINEMA or
OFF
Displays DVD
Setup menu
Displays System
Setup menu
NOTE: Your remote control may differ slightly
from the one pictured here. The above diagram is
for illustrative purposes only.
UV7
USING THE TFT MONITOR
Open/Close TFT Monitor
Press the OPEN button (1) on the front panel or press the
( ) button (25) of the front zone remote control to activate
the mechanism that moves the display panel into the viewing
position.
Press the OPEN button (1) on the front panel or press the
( ) button (25) of the front zone remote control to load the
display panel back into the compartment.
TFT Monitor Auto Open
If “TFT Auto Open” is “on” when the unit is turned on, the
monitor automatically moves to the viewing position.
If “TFT Auto Open” is ”off” when the unit is turned on, press
the OPEN button (1) or ( ) button (25) on the front zone
remote control to move the monitor into the viewing position.
If “TFT Auto Open” is set to ”Manual”, the TFT will not close
when the key is turned off.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the
display in relationship to the viewing angle. The monitor
angle can be adjusted for optimum viewing using one of the
following methods:
Step by Step Angle Adjustment
Press the ( ) or ( ) button (3, 4) on the monitor frame to
adjust the tilt angle of the screen one step at a time.
Continuous Angle Adjustment
Press and hold the ( ) or ( ) button (3, 4) on the monitor
frame to adjust the tilt angle in a continuous motion.
Aspect Ratio
Press the WIDE button (28) on the remote control or WIDE/
PICTURE button (2) on the monitor to adjust the aspect ratio
as follows:
CINEMA
The entire screen is extended
horizontally to the aspect ratio of 16 to
9. The extension ratio is the same at
any point.
NORMAL
The conventional display image has a
4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
OFF
Image Setting
Table 2 shows the video output mode for each playing
source.
Table 2: Video Output Modes
Playing Source Video Output Modes
AM/FM TUNER YUV Mode
XM TUNER YUV Mode
iPod YUV Mode
DVD YUV Mode
AUX IN CVBS Mode
*CVBS – Composite Video Baseband Signal
Parameter Adjustment Procedure
1. Enter Picture Quality Setting mode:
Press the PIC button (24) on the remote or press and
hold the WIDE/PICTURE button (2) on the monitor
panel.
2. Select Item to Set:
Press the (>>) (
<<) buttons (14, 22) on the remote or
press and hold the (/\) or (V) buttons (18, 19) on the
monitor panel.
3. Set Parameters:
Press (|<<) (>>|) buttons (17, 19) on the remote or press
(<) (>) buttons (16, 17) on the monitor panel.
4. Exit Picture Quality Setting Mode:
Press the PIC button (24) on the remote or press and
hold the WIDE/PICTURE button (2) on the monitor
panel.
Parking Brake
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle
brake switch, the front TFT monitor will display video only
when the parking brake sequence is engaged. Before starting
the parking brake sequence, the radio must be on with the
video media disc inserted and playing.
Parking Brake Sequence
There are two situations that can start the Parking Brake
Sequence:
• Parking brake is engaged (on) when the vehicle is started
or the accessory / ignition is turned on. To activate video,
the following sequence of events must be completed:
a. Release parking brake for 1 second.
b. Reapply the parking brake.
c. Video should be displayed on the TFT monitor within 1
~ 2 seconds.
• Parking break is disengaged (off) when the vehicle is
started or the accessory / ignition is turned on. To activate
video, the following sequence of events must be
completed:
a. Set parking brake for 1 second.
b. Release parking brake for 1 second.
c. Reapply parking brake.
d. Video should be displayed on the TFT monitor within 1
~ 2 seconds.
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following
protective measurements can be executed to prevent
damage to the mechanism or monitor:
Table 3: Monitor Protective Measures
Obstruction
Monitor load
ing out hori
zontally
Monitor load
ing in hori
zontally
Monitor load
ing out verti
cally
Monitor load
ing in verti
cally
Self
Protection
Monitor is auto
matically
loaded into unit
Unit stops at
obstruction
point
Unit stops at
obstruction
point
Unit stops at
obstruction
point
After the protective procedure is executed, normal operation
is resumed by pressing the OPEN button (1) or disconnecting
and reconnecting the power.
OPEN Button
Pressed
Monitor fully
extended hori
zontally
Monitor fully
extended hori
zontally
Monitor swiv
els back to the
unit
Monitor swiv
els back to the
unit
Power
Reconnected
Monitor is auto
matically
loaded into unit
Monitor is auto
matically
loaded into unit
Monitor swiv
els back to the
unit
Monitor swiv
els back to the
unit
UV7
OPERATING INSTRUCTIONS
Power On / Off
Press the /MUTE button (1) to turn the unit on. The buttons
on the front of the unit light up and “WELCOME” appears
briefly in the LCD panel (17), followed by the current mode
status. If the TFT screen is open, only the current mode
status is displayed.
Press and hold the /MUTE button (1) on the front panel or
the POWER button (4) on the remote to power off the
unit.The monitor is drawn back into the main compartment
and the LCD screen displays “BYE-BYE”.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The
beep tone cannot be disabled.
Mute
Press the /MUTE button (1) on the front panel or the MUTE
button (3) on the remote to mute the volume from the unit.
Press the MUTE button again to restore the volume. “MUTE”
is displayed on the LCD monitor. Adjusting the volume or
using any of the audio set-up features cancels the mute
function.
Playing Source Selection
Press the SRC button (15) on the front panel or the SRC
button (8) on the remote to change between available playing
sources in the following order: Tuner, DVD/CD, XM, iPod,
Aux In, Camera (rear view video camera) and TV. The
playing mode is displayed on the TFT and LCD screens.
AUX IN Mode
An external peripheral device can be connected to this unit
via standard RCA connectors for video and left/right audio.
Volume Adjustment
To increase or decrease the volume level, turn the ROTARY
ENCODER (6) on the front panel or press the VOL+/ VOL-
buttons (15, 16) on remote control. When the volume level
reaches “0” or “40”, a beep sounds, indicating that the
adjustment limit has been reached. The volume ranges from
“0” to “40”. The LCD or TFT screen displays the volume level
for 3 seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting
regardless of the volume setting prior to turning the unit off.
To program a specific volume level, push and hold the
AUDIO button (2) while the yellow volume bar is displayed on
the screen. The unit will beep two times to confirm your turnon volume setting.
Audio Control Menu
The Audio Control feature allows you to easily adjust your
audio system to meet the acoustical characteristics of your
vehicle, which vary depending on the type of vehicle and its
measurements. To get the best possible sound quality from
your new system, be sure to adjust the settings for the
speakers as well. Proper setting of the Fader and Balance
boosts the effects of the cabin equalizer.
Accessing the Audio Control Menu
Press the VOL/LOC/DX knob (6) on the front panel once to
display the “AUDIO” menu.
Selecting an Audio Feature for Adjustment
Continuously press the VOL/LOC/DX knob (6) on the front
panel, or press the (>>)/(
control or the (/\)/(V) buttons (18, 19) on the joystick to select
the audio feature to be adjusted.
Adjusting an Audio Feature
Rotate the VOL/LOC/DX knob (6), press the (|<<)/(>>|)
buttons (17, 19) on the remote control, or press the (<)/(>)
buttons (16, 17) on the joystick to adjust the selected feature
to the desired setting.
Table 4: Audio Adjustments
Audio Function Adjustable Range
EQ User
Bass 14 to +14
Treble 14 to +14
Fader 7 to +7
Balance 9 to +9
Sub 9 to +9
Loud Off, 1 4
<<) buttons (14, 22) on the remote
Flat
Jazz
Pop
Classical
Rock
Vocal
NOTE: The Bass and Treble levels are only adjustable
when EQ is set to “User” mode.
Loudness
• The Loudness level/function is dependent on the main
volume setting. As the volume is increased, less
Loudness compensation is applied to the audio signal.
This is referred to "Auto-Loudness". The possible
loudness settings are as follows:
•Off
• 1 - Slight bass boost at low volume level
• 2 - Moderate bass boost at low volume level
• 3 - Good bass boost at low to mid volume level
• 4 - maximum bass boost at mid volume level
Exiting the Audio Control Menu
Press and hold the VOL/LOC/DX knob (6) or stop making
adjustments for a few seconds to exit the audio control menu.
System Reset
To correct a system halt or other illegal operation, use the tip
[RESET] Button
of a pen to press the RESET button (22) located on the front
bottom-right corner of the unit. After a system reset, the unit
restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.
Line Mute
If the “MUTE” wire is connected, audio output mutes when a
telephone call is received by the car phone or when verbal
navigation is performed (external navigation input required).
UV7
SYSTEM SETUP MENU
In “System Setup” mode, “ASP CONFIG” and “GENERAL
SETUP” are available for adjustment. Setup can be
performed by pressing the dedicated button on the remote
control or on the front panel. For system settings, press the
SYS SETUP button (31) on the remote control to enter the
“System Setup” menu. “ASP CONFIG” is highlighted in
green.
General Setup Menu
Accessing the General Setup Menu
To access the “GENERAL SETUP” Menu, press the direction
buttons on the joystick (16, 17, 18, 19) or remote control (14,
17, 18, 19, 22) to highlight “GENERAL SETUP” in green.
DIRECTION BUTTONS
Press the >/|| button (18) on the remote control to enter the
“GENERAL SETUP” menu. A menu appears with the option
for the first item, “Radio”, highlighted in light blue.
Selecting a Feature for Adjustment
Press the >> or
the /\ or V buttons (18, 19) on the joystick to select the feature
to be adjusted.
<< buttons (14, 22) on the remote control or
Adjusting a Feature
1. Enter the option field for the feature you want to adjust
by pressing the >/|| button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.
2. Select a new value by pressing the >> or
<< buttons (14,
22) on the remote control or the /\ or V buttons (18, 19)
on the joystick.
3. Confirm your selection by pressing the
<<, |<<, or >>|
buttons (22, 17, 19) on the remote control, or the < or >
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.
Table 5: General Setup Menu Features
Setting Options Function
Radio USA • AM Frequency Spacing 10kHz
Europe • AM Frequency Spacing 9kHz
South
America 1
South
America 2
Arabia • AM Frequency Spacing 9kHz
Korea • AM Frequency Spacing 9kHz
• AM Frequency Band
530kHz~1720kHz
• FM Frequency Spacing 200kHz
• FM Frequency Band
87.5MHz~107.9MHz
• AM Frequency Band
522kHz~1620kHz
• FM Frequency Spacing 50kHz
• FM Frequency Band
87.5MHz~108.0MHz
• AM Frequency Spacing 10kHz
• AM Frequency Band
530kHz~1720kHz
• FM Frequency Spacing 100kHz
• FM Frequency Band
87.5MHz~108.0MHz
• AM Frequency Spacing 5kHz
• AM Frequency Band
520kHz~1600kHz
• FM Frequency Spacing 100kHz
• FM Frequency Band
87.5MHz~108.0MHz
• AM Frequency Band
531kHz~1620kHz
• FM Frequency Spacing 100kHz
• FM Frequency Band
87.5MHz~108.0MHz
• AM Frequency Band
531kHz~1602kHz
• FM Frequency Spacing 200kHz
• FM Frequency Band
88.1MHz~107.9MHz
Table 5: General Setup Menu Features
Setting Options Function
China • AM Frequency Spacing 9kHz
Clock Mode 12H Clock displays 12 hour time using
24H Clock displays 24 hour time up to
Screen Saver On Turn screen saver on/off.
Off
Video Format
(Input cir
cuitry auto
detects the
video signal
from the
CAMERA
and Aux In
video source.
Video format
does not
affect the TV
tuner this is
an NTSC TV
tuner only.
TFT Auto
Open
OSD Lan
guage
Clock (HH:MM) See “Adjusting the clock” to learn
Auto The color signal output is switched
NTSC The color signals are output in the
PAL The color signals are output in the
On The TFT panel automatically opens
Off You must press the OPEN button
Manual When the ignition is turned OFF, the
English The menus are displayed in English
• AM Frequency Band
522kHz~1620kHz
• FM Frequency Spacing 100kHz
• FM Frequency Band
87.5MHz~108.0MHz
AM and PM.
23:59.
automatically based on the current
video input signal NTSC or PAL.
standard NTSC format.
standard PAL format.
when the unit is turned on.
(1) to open the TFT panel.
TFT panel DOES NOT retract if it
was previously out
only.
how to set the clock.
Return to previous menu.
UV7
Adjusting the Clock
Method 1 – TFT screen open:
1. Access the “Clock” setting under the General Setup
menu.
2. Press the >> or
<< buttons (14, 22) on the remote
control or the /\ or V buttons (18, 19) on the joystick to
move the cursor to the “Hour” or “Min” position.
3. Press the |<<, or >>| buttons (17, 19) on the remote
control or the < or > buttons (16, 17) on the joystick to
adjust the hour or minutes.
4. Press the
<< button (14) on the remote control to confirm
setup.
Method 2 – TFT screen closed:
1. Press and hold the DISP button (5) until the clock
flashes in the LCD display.
1. Press the /\ or V buttons (18, 19) on the joystick to move
the cursor to the “Hour” or “Min” position.
2. Press the < or > buttons (16, 17) on the joystick to adjust
the hour or minutes.
3. Press the DISP button (5) on the unit to confirm setup.
Returning to the System Setup Menu
To return to the System Setup menu, move to , then
press the >/|| button on the remote control.
ASP (Audio Sound Processing) Config
Menu
The ASP Config Menu allows you to make fine audio
adjustments.
Accessing the ASP Config Menu
To access the “ASP CONFIG” Menu, press the direction
buttons on the joystick (16, 17, 18, 19) or remote control (14,
17, 18, 19, 22) to highlight “ASP CONFIG” in green. Press
the >/|| button (18) on the remote control to enter the “ASP
CONFIG” menu. A menu appears with the option for the first
item, “Bass Center Freq”, highlighted in light blue.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust
by pressing the >/|| button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.
2. Select a new value by pressing the >> or
<< buttons (14,
22) on the remote control or the /\ or V buttons (18, 19)
on the joystick.
3. Confirm your selection by pressing the
<<, |<<, or >>|
buttons (14, 17, 19) on the remote control, or the < or >
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.
Table 6: ASP Config Menu Features
Setting Options Function
Bass Center
Freq
Treble Center
Freq
60Hz According to the audio source, select
80Hz
100Hz
130Hz
150Hz
200Hz
10KHz According to the audio source, select
12.5KHz
15KHz
17KHz
the Bass Center Frequency to
achieve the best Bass effect.
the Treble Center Frequency to
achieve the best Treble effect.
Table 6: ASP Config Menu Features
Setting Options Function
Sub Filter 80Hz Selecting a crossover frequency sets
120Hz
160Hz
Sub Phase 0D Subwoofer output IN phase
180D Subwoofer output OUT OF phase
Bass Q Factor 1.0 When the Bass Center Frequency is
1.25
1.5
2.0
a cut off frequency of the subwoofer's
LPF (low pass filter) and the
“SMALL” speakers' HPF (high pass
filter). The Crossover frequency set
ting has no effect if the subwoofer is
set to “OFF” and any other speaker is
set to “LARGE”.
NOTE: Depending on your installa
tion, reversing the subwoofer phase
may increase Bass output.
selected, adjusting the Bass Q Fac
tor alters the sharpness of the Bass
output.
Return to previous menu.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SYS SETUP button (31) on the remote control or the DISP
button (5) on the front panel.
UV7
AM/FM TUNER OPERATION
Tuner TFT Display
1. Current Radio Band Indicator
2. Radio Frequency Indicator
3. Clock
4. Stereo Broadcasting Indicator
5. Local Indicator
6. Preset Radio Stations
7. Playing Mode
8. User Defined Equalizer Level
9. Loud Setting Indicator
10. Current Preset Station Indicator
Tuner LCD Display
Switch to Radio Tuner source
Press the SRC button (15) on the front panel or remote
control (8) to switch to the RADIO TUNER source. The Tuner
TFT or LCD display appears.
Select FM/AM Band
Press the BAND button (14) on the front panel or the remote
control (20) to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.
Seek Tuning
Press the >>| button (19) on remote control or the > button on
the joystick (17) to seek the next station higher.
Press the |<< button (17) on the remote control or the <
button on the joystick (16) to seek the next station lower.
Manual Tuning
Press the /\ or V buttons (18, 19) on the joystick to increase
or decrease the tuning frequency one step.
Using Preset Stations
Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the TFT screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Hold a preset button (8-13) for three seconds. The
preset number appears in the LCD panel.
Recalling a Station
1. Select a band (if needed).
2. Press a preset button (8-13) to select the corresponding
stored station.
the yellow volume bar IS NOT displayed. Press and hold LO/
DX again to turn Local off. When the Local function is active,
the “LOC” indicator appears lit on the LCD or TFT screen.
1
1. Current Radio Band Indicator
2. Radio Frequency Indicator
3. Current Preset Station Indicator
4. Stereo Broadcasting Indicator
5. Strong Local Signal Broadcasting Indicator
2
3
5
4
To select six strong stations and store them in the current
band:
1. Select a band (if needed).
2. Press the AS button (26) on the unit to activate the Auto
Store function.
The new stations replace stations already stored in that band.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a
strong radio signal are played. To activate the Local function,
press and hold the LO/DX button (6) on the front panel while
Auto Store (AS)
UV7
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking break is
applied. If you attempt to play a DVD while the vehicle is
moving, the TFT screen displays “PARKING” with a blue
background. Rear video screens, if applicable, will operate
normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the OPEN (1) button.
The unit beeps and then opens.
Closing the TFT Screen
Press the OPEN (1) button again to close the TFT screen. If
the screen is in the “IN” position, it moves out before closing.
Once the TFT screen is closed, the LCD panel displays the
current status.
DVD LCD Display
3
1. Current Playing Chapter
2. Current Playback Time
3. SC - Scan Playback; RPT - Repeat Playback;
RDM - Random Playback; ALL - Playback All Discs
1
2
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered disc play
begins. If the TFT screen is closed, the DVD indicator
appears lit on the LCD screen.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see
“RATING (Parental Lock) Menu” on page 19).
You cannot insert a disc if there is already a disc in the unit.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is closed and the DVD is finalized.
Ejecting a Disc
Press the button (21) on the front panel or remote control
(25) to eject the disc. The unit automatically reverts to Tuner
mode.
This unit is equipped with Keyless Disc Eject, allowing you to
eject a disc with the power off. The unit remains off after the
disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the button (21) on the
front panel or remote control (25) to reset the loading
mechanism. Normal operation resumes.
Controlling Playback
Stopping Playback
Press the 6/STOP button (13) on the front panel or the /
BAND button (20) on the remote control to stop DVD play.
To resume playback, press the joystick ENTER button (20)
on the front panel or the >/|| button on the remote control
(18).
Pausing Playback
Press the joystick ENTER button (20) on the front panel or
the >/|| button on the remote control (18) to suspend or
resume disc play.
Slow Motion Playback
Press the V button (19) on the joystick to play the current title
in slow motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press
>/|| (18) to resume normal play.
Fast Forward
Press the >> button (14) on the remote control or the /\ button
(18) on the joystick to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”,
“8X”, and “20X”.
Repeat Playback
Press the 4/REP button (11) on front panel or the REPT
button (7) on remote control to alter repeat mode according to
the following:
• DVD: Repeat Title, Repeat Chapter, Repeat Off
• VCD (PBC Off): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available
if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
• Press the REPT A-B button (6) on the remote control to
set the start point (A) of the repeated section.
• Press the REPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat continuously.
• Press the REPT A-B button again to cancel the A-B
section setting and stop repeat play.
Random Playback
With a DVD, VCD, or CD playing, press the 5/RDM button
(12) on the front panel or the RDM button (33) on the remote
control to activate random playback and play all chapters/
tracks in random order. “Shuffle On” appears on the screen.
Press the >>| button (19) on the remote control or the >
button on the joystick (17) to play the next random track.
Press the RDM button again to turn random play off. “Shuffle
Off” appears on the screen.
NOTE: When a VCD is playing with PBC turned “On”,
activating random playback automatically turns PBC off.
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the
main DVD menu. Use the directional (arrow) buttons (<, >, /\
& V) on the joystick (16, 17, 18, 19) to select a title from the
menu.
Press the TITLE button (2) on the remote control to select a
different title for playback.
Press the >/|| button (18) on the remote control or the joystick
ENTER button (20) to confirm your selection and begin
playback.
Moving Through Chapters
Press the >>| button (19) on the remote control or the >
button on the joystick (17) to advance to the next chapter on
the DVD.
Press the |<< button (17) on the remote control or the <
button on the joystick (16) to move to the previous chapter.
Goto Search
During DVD or VCD playback, perform the following steps to
use the GOTO feature to access a specific location on a disc:
1. Press the GOTO button (21) on remote control to enter
“GO TO” mode.
2. Press the >> or
control or the /\ or V buttons (18, 19) on the joystick to
select a category (highlighted in blue).
• For DVD mode, you can choose Time or Title/Chapter
search.
<< buttons (14, 22) on the remote
UV7
DVD Search
Time – Go to specific
time in current title
Title/Chapter – Go to
specific time in a
chapter
• For VCD mode, press the GOTO button to choose
between Track Search, Disc Search and Exit.
VCD Track Search
Time – Go to specific
time in the current track
Track – Go to specific
track
VCD Disc Search
Time – Go to specific
time on disc
Track – Go to specific
track
3. Enter a time into the field using the numeric keypad (29)
on the remote control.
4. Press the >/|| button (18) on the remote control or the
joystick ENTER button (20) to go to the specified
location on the disc.
5. Press the GOTO button again to exit.
Direct Chapter / Track Selection
During DVD, VCD and CD
playback, you can use the numeric
keypad on the remote control (29)
to access a track directly.
Viewing an Alternate
Picture Angle (DVD
Only)
Some DVDs contain scenes that have been shot
simultaneously from different angles. For discs recorded with
multiple angles, press the ANGLE button (13) on the remote
control to toggle available angles of the on-screen image.
Zooming
Press the ZOOM button (23) on the remote control to enlarge
and pan through the video image using the following options:
“Q1”, “Q2”, “Q3”, and “OFF”.
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages,
press the AUDIO button (5) on the remote control to choose
a language.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with
subtitles, press the SUBTITLE button (9) on the remote
control to choose the language in which you would like the
subtitles to appear.
NOTE: During VCD playback, press the AUDIO button (5)
on the remote control to choose between Left Channel,
Right Channel, and Stereo.
PBC (Play back Control) (VCD Only)
For VCDs with play back functionality, play back control
(PBC) provides additional controls for VCD playback.
Press the MENU button (1) on remote control to toggle the
PBC function “On”/”Off”. Once PBC is on, playback starts
from track one of the play list.
NOTE: When PBC is activated, fast forward, slow
playback, and previous/next track are available. Repeat
and direct track selection are not available.
When PBC is activated, selecting random, scan, or search
playback automatically deactivates PBC.
Playback Information
During DVD and VCD playback, press the DISP button (10)
on remote control to display playback information on the
screen including the media playing and current playback
time.
DVD Playback Information
The following information is displayed at the top of the screen
during DVD playback:
• T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is
currently playing.
• C : 2/16 – “2 / 16" indicates the second of 16 titles on the
DVD is currently playing.
• 00:41:28 – “00:41:28” indicates the playback time of the
current title.
• 2 / 6 Eng – The language display information indicates
the second language out of 6 (English) is currently being
used.
The following information appears at the bottom of the screen
during DVD or CD playback:
Front: DVD/CD EQ: Flat Loud: Level 1
• Front: DVD/CD – “DVD/CD” is the current playing source
for the front zone.
VCD Playback Information
The following information is displayed at the top of the screen
during VCD playback:
• VCD2.0 – Format of current disc.
• T: 6/18 – “6/18” indicates the sixth of 18 tracks on the VCD
is currently playing.
• 00:02:18 – “00:02:18” indicates the playback time of the
current track.
The following information appears at the bottom of the screen
during VCD playback in 2-Channel mode:
Front: DVD/CD EQ: Flat Loud: Level 1
• Front: DVD/CD – “DVD/CD” is the current playing source
for the front zone.
• EQ:FLAT – The equalizer setting is FLAT.
• Loud: Level 1 – The Loud option is set to Level 1
loudness.
UV7
General Disc Information
Table 7: Disc Properties
Symbol 12cm Disc Properties Max Play Time
Single side single layer (DVD 5)
Single side double layer (DVD 9)
Double side single layer (DVD 10)
Double side double layer (DVD 18)
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (VCD)
Single side single layer 74 minutes
Table 8: Disc Symbols
Symbol Meaning
Number of voice languages recorded. The num
ber inside the icon indicates the number lan
guages on the disc (maximum of 8).
Number of subtitle languages available on the
disc (maximum of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box
and “PS” stands for Pan/Scan. In the example on
the left, the 16:9 video can be converted to Letter
Box video.
Indicates the region code where the disc can be
played.
• Region 1: USA, Canada, East Pacific Ocean
Islands
• Region 2: Japan, Western Europe, Northern
Europe, Egypt, South Africa, Middle East
• Region 3: Taiwan, Hong Kong, South Korea,
Thailand, Indonesia, South East Asia
• Region 4: Australia, New Zealand, Middle and
South America, South Pacific Ocean Islands/
Oceania
• Region 5: Russia, Mongolia, India, Middle
Asia, Eastern Europe, North Korea, North
Africa, North West Asia
• Region 6: Mainland China
• ALL: All regions
(MPEG 1 Method)
74 minutes
UV7
DVD/DISC SETUP MENU
NOTE: A DVD/disc must be loaded into the mechanism
and playing prior to accessing the DVD Setup menu.
While the DVD/disc is playing, press the DVD SETUP
button on the remote to access the DVD Setup menu.
In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO” and
“RATING” (parental lock) are available for setup. This
operation can be performed using the remote control or
joystick controls.
Accessing the DVD Setup Screen
For system settings, press the DVD SETUP button (31) on
the remote control to enter the “DVD Setup” menu.
“LANGUAGE” is highlighted in green.
submenu appears in a second row with the selected
option highlighted in light blue.
2. Select a new value by pressing the >> or
<< buttons (14,
22) on the remote control or the /\ or V buttons (18, 19)
on the joystick.
3. Confirm your selection by pressing the
<<, |<<, or >>|
buttons (22, 17, 19) on the remote control, or the < or >
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.
LANGUAGE Menu
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used. During playback, press the
SUBTITLE (9) or AUDIO (5) button on the remote control to
change the language directly. This will not effect the DVD
menu settings.
Table 9: LANGUAGE Menu Features
VIDEO Menu
Table 10: VIDEO Menu Features
Setting Options Function
TV Shape
(Aspect
Ratio)
Angle
Mark
NOTE: For standard discs not formatted for
“widescreen”, use of the 16:9 aspect ratio will result in
image distortion.
4:3 PS With 16:9 display, the left and right sides
4:3 LB With 16:9 display, the top and bottom are
16:9 Image is presented in wide view with a
On Angle indicator (if applicable) is shown.
Off Angle indicator is not shown.
are cut off.
cut off.
16:9 aspect ratio.
Return to previous menu.
NOTE: Once the DVD setup is complete, the settings are
memorized. To return to the factory default settings,
press the RESET button (22) on the front panel.
Accessing a Menu
To access a menu (LANGUAGE, VIDEO, AUDIO or
RATING), press the direction buttons on the joystick (16, 17,
18, 19) or remote control (14, 17, 18, 19, 22) to highlight the
desired menu in green.
Selecting a Feature for Adjustment
Once inside a menu, press the >> or
<< buttons (14, 22) on
the remote control or the /\ or V buttons (18, 19) on the
joystick to select the feature to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust
by pressing the >/|| button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
Setting Options Function
Subtitle English Select the default language in which
Chinese
Auto
Off
Audio English Select the default language in which
Chinese
DVD Menu English Select the default language in which
Chinese
you would like subtitles (if applicable) to
be displayed.
you would like audio (when optional) to
be played.
you would like the DVD menu (if appli
cable) to be displayed.
Return to previous menu.
AUDIO Menu
Table 11: AUDIO Menu Features
Setting Options Function
DRC Off Employ the Dynamic Range Control for
On
better playback for low volumes.
Return to previous menu.
RATING (Parental Lock) Menu
The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is unlocked. Once
setup, the parental lock is released only by entering the
correct password. Once the password is entered, rating is
available for setup.
Table 12: RATING Menu Features
Setting Options Function
Password Enter a 4 digit password to acti
vate the “Rating” feature.
UV7
Table 12: RATING Menu Features
Setting Options Function
Rating 1. Kid Safe Select the appropriate rating level
2. G
3. PG
4. PG 13
5. PG R
6. R
7. NC 17
8. Adult
Load Factory Reset Select “Reset” to restore the fac
for the intended audience.
You may override higher ratings
by using your password.
tory default settings for the Rating
system only.
Return to previous menu.
To reset the password, enter the “RATING” menu and enter
the current password. Once the correct password is entered,
you can access the “Password” field and enter a new one.
NOTE: Record the password and keep it in a safe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating
is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the disc description.
UV7
DVD/DISC AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD, CD and MP3 operation. Please see the DVD/Disc
Video Operation section for information about these topics.
The UV7 will play music or other audio files from the following
disc media:
• CD-DA
• CD-R/RW with MP3 or WMA files
•DVD
• DVD-R/RW with MP3 or WMA files
Upon inserting a disc with the TFT screen open, the disc and
track title (if available), along with the track number and
playing time appear on the screen.
Controlling Playback
Stopping Playback
Press the 6/STOP button (13) on the front panel or the /
BAND button (20) on the remote control to stop disc play.
To resume playback, press the ENTER button, or the joystick
(20), on the front panel or the >/|| button on the remote
control (18).
Pausing Playback
Press the ENTER button, or the joystick (20), on the front
panel or the >/|| button on the remote control (18) to suspend
or resume disc play.
Moving Through Tracks
Press the >>| button (19) on the remote control or the >
button on the joystick (17) to advance to the next track on the
disc.
Press the |<< button (17) on the remote control or the <
button on the joystick (16) to move to the previous track.
Repeat Playback
Press the 4/REP button (11) on front panel or the REPT
button (7) on remote control to alter repeat mode according to
the following:
• DVD: Repeat Title, Repeat Chapter, Repeat Off
• CD-DA: Repeat Single, Repeat Off
• CD-R/RW: Repeat Single, Repeat Off
• DVD-R/RW: Repeat Single, Repeat Off
Track Scan Select (CD-DA discs only)
During disc play, press the 3/SCN button (10) on the unit or
the SCAN button (34) on the remote control to play the first
10 seconds of each track. When a desired track is reached,
press the SCN button again to cancel the function and play
the selected track.
Random Play Select
During disc play, press the 5/RDM button (12) to play the
tracks on the disc in a random, shuffled order. In Random
Play mode, you can Press the |<< or >>| button (17, 19) on
remote control or the < or > button (16, 17) on the joystick to
select a track in random order instead of the normal
progression. Press 5/RDM again to cancel Random Play
mode.
NOTE: CD-R and CD-RW will not play unless the
recording session is closed.
Fast Forward
Press the >> button (14) on the remote control or the /\ button
(18) on the joystick to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”,
“8X”, and “20X”.
MP3/WMA Operation
This player allows you to play back MP3 and WMA files
recorded onto CD-R/RW's and DVD-R/RW’s. For CD-RW
discs, please make sure it is formatted using the full method
and not the quick method to prevent illegal disc operation.
Up to 999 songs / files can be burned onto a disc for a MEGA
DVD music mix. Do not exceed this number of songs / files or
disc readability problems may occur.
MP3 Format Compatibility
The file naming formats listed below are compatible with this
unit:
• ISO 9660 – file name: 12 characters, file extension: 3
• ISO 9660 – file name: 31 characters, file extension: 3
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly.
Use the following settings when compressing audio data for
your MP3 disc:
• Transfer Bit Rate: 128kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity,
disable additional writing. For recording on an empty disc up
to maximum disc capacity, use the "Disc at once" setting.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the
sequence of the “Root’ directory.
Use the numeric keypad (29) on the remote control to access
files directly.
NOTE: When burning MP3 / WMA files onto a DVD disc,
use the 2X or 4X burning option, if available. This slower
burning speed will help eliminate buffer errors and
increase disc reading reliability. Also, use folders when
burning large numbers of songs / files to a disc for easy
music navigation.
In addition, select the "Disc at Once" option in your
burning software when burning DVDs.
characters
characters
UV7
iPod OPERATION
Accessing iPod Mode
The unit will automatically switch to iPod mode when an iPod
is plugged into the media module. To return to the iPod menu
from any other source menu, press the SRC button (15) on
the front panel or remote control (8) until the iPod menu
appears on the screen.
Press the AUDIO button (5) on the remote control to access
the iPod VIDEO mode. The UV7 will release control back to
the iPod so you can select video media to be displayed on
the UV7 TFT monitor. To exit VIDEO mode, press the >>
button (14) on the remote control or MENU button on the
iPod.
NOTE: To transmit the video from your iPod to the UV7
screen, you must set the following options through the
iPod video settings menu: TV Out = On, TV Signal =
NTSC, and Widescreen = On.
Photo Playback
While iPod photos can be viewed on the UV7 screen, you
must use the iPod to control photo playback options.
Press the MENU button (1) on the remote control to access
the iPod PHOTO mode. The UV7 will release control back to
the iPod so you can select video media to be displayed on
the UV7 TFT monitor. To exit PHOTO mode, press the >>
button (14) on the remote control or MENU button on the
iPod.
Controlling your iPod
The following remote control buttons are used to access the
iPod menus:
TITLE Music
MENU Photos
AUDIO Videos
Use the joystick on the unit or the directional keys on the
remote control to navigate the iPod menus.
Music Playback
Press the >>| button (19) on remote control, or the > button
on the joystick (17) to move to the next item on the menu.
Press the |<< button (17) on the remote control, or the <
button on the joystick (16) to move to the previous item on the
menu.
Press the >/|| button (18) on the remote control or the joystick
ENTER button (20) on the head unit to select the highlighted
menu option.
Press the >> button (14) on the remote control or the /\ button
(18) on the joystick to return to the previous menu.
Video Playback
While iPod video can be viewed on the UV7 screen, you must
use the iPod to control video playback options.
NOTE: After disconnecting your iPod, the UV7 will
always return to last mode accessed when your iPod is
plugged back into the unit.
Fast Forward/Fast Reverse
To fast forward or fast reverse, press and hold the |<< or >>|
buttons (17, 19) for 1 second and continue to hold. Release
to resume normal play.
Search Playlist/Artist/Album/Song
To search through Playlists, Artists, Albums and Songs, press
the 1 button (29) on the remote control while in one of the
following directories: Playlist, Artist, Album or Song. The
selected directory will be accessed with the number of pages
and files in that directory displayed at the top of the page. To
access the page or file, enter the page or file number directly
from the remote control keypad. Press the |<< or >>| button
(17, 19) on the remote control or the < or > button (16, 17) on
the joystick to select the desired song or track.
Loading...