TABLE OF CONTENTS
1 IMPORTANT SAFETY INSTRUCTIONS............................1
2 SUMMARY OF FEATURES................................................... 1
3 INSTALLATION...................................................................... 2
3.1 Ostia Application Installation .............................................. 2
3.2 Installing Maps..................................................................... 2
3.2.1 Map Preparation............................................................ 2
3.2.2 Copying maps from the Desktop PC to the Pocket PC.3
4 UNINSTALL OSTIA SOFTWARE........................................3
5 USING OSTIA .......................................................................... 4
5.1 Ostia Menus.........................................................................5
5.1.1 File ................................................................................ 5
5.1.2 Find...............................................................................6
5.1.3 View............................................................................10
5.1.4 GPS............................................................................. 11
5.1.5 Opt...............................................................................12
5.2 View Controls.................................................................... 13
6 TIPS ON GETTING STARTED ........................................... 13
7 GPS (OPTIONAL)..................................................................13
7.1 Required components for Pocket PC Navigator System....13
7.2 Installing the GPS .............................................................. 14
7.3 Using the GPS.................................................................... 15
8 TROUBLESHOOTING.........................................................16
9 TECHNICAL SUPPORT.......................................................16
10 SYSTEM REQUIREMENTS ................................................ 16
10.1 Pocket PC/Handheld PC Requirements...........................16
10.2 Desktop/Laptop Requirements......................................... 16
Page i
Ostia User Manual
SECTION 1: Important Safety Instructions
For the safety of yourself and others, please observe the following safety
For the safety of yourself and others, please observe the following safety
For the safety of yourself and others, please observe the following safety For the safety of yourself and others, please observe the following safety
requirements:
requirements:
requirements:requirements:
! Do not attempt to operate a Pocket PC Navigator system in a vehicle while the
vehicle is in motion, or in any way that interferes with safe driving.
! Secure the iGPS receiver and Pocket PC to the vehicle in such a way as not to
endanger the driver or passengers during driving or operation.
! Do not use the Pocket PC and Ostia in any area (country, st ate, city, etc.) that
prohibits the use of electronic displays in moto r vehicles.
! Navigation maps may contain errors and omissions or may be out-of-date with
recent road changes or road conditions. Please be at tentive to roadway signage,
all posted roadway information, and the condition of the roads you are traveling.
! Routes generated by Ostia are only recommendations and ar e for personal and
non-commercial use.
! Ostia software and the iGPS receiver m ay not be used for any purpose in which
failure of the product s could lead t o per sonal injury, physical, or environmental
damage.
! Pharos and its suppliers specifically disclaim any warranties, either express or
implied, for their product s’ fitness for use in any high-risk act ivities.
SECTION 2: Summary of Features
! Compatible with CompactFlash GPS receiver (NMEA-0183) ! Detailed street level mapping data. ! Mapping features include: location by address, intersection, location of ar ea point s
of interest or waypoint saved by user previously.
! Calculating route from one location to another , or selection of a street location on
the map.
! Opening up to 10 maps at a time. ! Driving directions and route guidance. ! Tapping the street on the map to show the street name. ! Zoom in and zoom out with stylus. ! Creating a user waypoint database. ! GPS status indicators. ! Simulating car navigation. ! When navigating with the iGPS r eceiver:
• Display the street name of the next turn at t he bottom of screen.
• Show the distance to the next turn.
• Voice prompt for reliable rout e guidance.
• Second prompt before a turn or highway entrance/exit.
• Auto zoom-in before the turn or highway entrance/exit and zoom-out after.
• Use of the iGPS receiver position as the point of origin.
• A one-touch Re-route button.
• Navigation data such as speed, longitude, latitude, local t im e and dir ection
of travel.
• Auto re-route option.
Page 1
Ostia User Manual
• Moving map while navigating with the iGPS receiver.
• Selectable “North Up” or “Heading Up” for map display.
• Selectable “on” or “off” for voice prompt.
•
Satellite constellation display.
SECTION 3: Installation
3.1 Ostia Application Installation
Installation of Ostia software requires that Microsoft ActiveSync (Windows CE Services)
be installed on your desktop computer. If not, please follow the instructions in the
section called "Installing Windows CE Services to Communicate with a Desktop
Computer" in your Pocket PC’s user gu ide.
Note: ActiveSync is not
included with the Ostia software.
To install Ostia software:
Storage
card folder
Ostia
CD-ROM
Your
Computer
Page 2
Ostia User Manual
3.2.2 Copying maps from the Desktop PC to your Pocket PC.
1. Make sure your Pocket PC is in its sync cradle and is attached to your PC.
2. Double click My Computer # C:\ # PharosMaps folder
3. In the PharosMaps folder you should see 2 files with the name of t he r egion you
just uncompressed. Both the .r m f and .inx file will need to be transferred to t he
Page 3
Ostia User Manual
SECTION 5: Using Ostia
To start the Ostia program, click the Start # Programs # Ostia. Your Pocket PC may
also provide additional methods of running programs, such as a special menu window.
Information/instructions provided in thi s section can also be found in your Pocket
PC help menu after Ostia is started. To read the help menu, please click the Start
icon
When the O st ia pr ogram is started for the first time, several start-up screens will appear
including the following:
This screen will allow you to choose which GPS receiver you will be using and have the
Ostia software automatically configure itself to work with that G PS receiver.
on your Pocket PC window, and then click .
Note: This screen will automatically appear only on the first time Ostia is opened. If you
need to view this screen again, it is located in the GPS Menu under Setup. (See Section
5.14)
Page 4
Ostia User Manual
p
5.1 Ostia Menus
The Ostia menu band consists of
several parts: The main menu
(File, Find, View, GPS and
Option), and the GPS indicator.
As shown in Figure 4.
The GPS indicator has three
changeable faces to indicate the
different operating status of the
receiver. By clicking the
indicator you can get more
information.
Blue arrow keys on the map
allow you to shift the viewable
portion of map currently open.
Figure 4
The red sad-face of the indicator tells that the receiver is either not powered proper ly or
not enabled (top, Figure 4); t he yellow calm-face shows that the receiver is in the
process of determining your position (m iddle, Figure 4) and the green happy-face shows
that the receiver is successfully tracking the position. (bottom, Figur e 4) . The menu
items are described in the following tables.
5.1.1 File
File Menu Items Description
Open
Page 5
Select this item to open a map file. The Open
command displays a list of all available maps.
Tap the file name that you want to open. Repeat
the same steps to open additional maps. You can
open up to ten maps at a time. Below the “Open”
menu item is listed the last 3 most recent ma
s
Ostia User Manual
g
that were opened.
Close Map
Delete Waypoint
Simulation Mode
About Ostia
Exit
Close opened map(s), clearing screen and
settings.
Delete waypoint item(s) from the database.
Select an item then press Delete to delete the
item. Press Finish to complete the delete process
and close the window. Press Cancel to delete
none of the waypoints and quit the delete process
and close window.
Simulating car navigation based on given
route.
Note: Before activating Simulation Mode, verify
that “Enable GPS” option is not checked.
Displays a window showing the current
version of Ostia software installed on your
Pocket PC.
Quit Ostia. Note: tapping Ctrl-q will also Quit
Ostia.
5.1.2 Find
Note: you must have a map file currently open to select this menu item!
Find Menu Items Description
Address
Page 6
Select this menu item to locate a street
containing a specified address on the currently
opened map file.
Selectin
an address is an easy 4 (four)-step
Ostia User Manual
p
process.
1. On the Street Lookup
several numbers (not address numbers such as
1234 “B” street but numbered street names
such as 2
street name. A list of closely related street
names will appear in the scrollable window.
Select the desired street name, then press Next
to proceed to step 2.
2. On the Lookup City
similar to Step 1. Select the desired city,
county, township, etc. You have the option to
select a specific zip code or just by city name.
Press Next to proceed to step 3.
3. All possible addresses belonging to the desired
street segments are displayed. Type the
address digits to find the desired address range
and then select it. Press Finish to proceed to
step 4.
Note: The numbers listed are either odd or even
sets of numbers according to the specific side of
the street on which they appear. This is essential
for accuracy on divided roads and one-way
streets.
nd
street) and/or letters of a desired
screen, type the first
screen, the steps are
Intersection
4. Specify if the location is an Origin or
Destination. If you want to save the location to
the waypoint database, check the save-option
box and give a waypoint name up to 50 letters.
The selected street segment will be displayed in
Green if an origin or Red if a destination.
Note: To modify a previous selection, press the
Back button.
Select this menu item to locate a street
intersection on the currently opened map.
Selecting an intersection is an easy 4 (four)-step
process.
1. On the Street Lookup
several numbers and/or letters of a desired
street name. A list of closely related street
names will appear in the scrollable window.
Select the desired street name, then press Next
to proceed to step 2.
2. Select a city, county, township, etc… from the
list of offered names. You have the option to
select a s
ecific zip code or just city name.
screen, type the first
Page 7
Ostia User Manual
Press Next to proceed to step 3.
3. All possible street crossings are listed. Make a
selection and press Finish to proceed to step 4.
4. Specify if the intersection is an Origin or
Destination. If you want to save the location to
the waypoint database, check the save-option
box and give a waypoint name up to 50 letters.
The selected intersection will be displayed in
Green if an origin or Red if a destination.
Note: To modify a previous selection, press the
Back button.
Point of Interest
Select this menu item to find a point of interest
on the currently opened map. Note, many points
of interest are not on a street, you may have to
use the closest intersection for routing purposes.
Selecting a point of interest is an easy 3 (three)-
step process.
1. Select a category of point of interest from the
scrollable list, then press Next to proceed to
step 2.
2. Select the desired point of interest. Press
Finish to proceed to step 3.
3. Specify if the location is an Origin or
Destination. If you need to save the location to
the waypoint database, check the save-option
box and give a waypoint name up to 50 letters.
The selected point of interest is marked and its
nearest road segment or intersection will be
displayed in Green if an origin or Red if a
destination.
Note: To modify a previous selection, press the
Back button.
Waypoint
Page 8
Select this menu item to find a waypoint from
the previously stored database.
Selecting a waypoint is an easy 2 (two)-step
process.
1. On the Waypoint List
several numbers and/or letters of a desired
waypoint name. A list of closely related
waypoint names will appear in the scrollable
window. Select the desired waypoint name,
then press Finish to proceed to step 2.
screen type the first
Ostia User Manual
2. Specify if the waypoint location is an Origin or
Destination.
The selected waypoint location will be displayed in
Green if an origin or Red if a destination
Note: The save-option check box is disabled.
New Route
Reverse Route
Select this menu item to display a new route
starting at the origin and ending at the destination.
Before this menu item is active, both the origin
and destination must be defined. When the iGPS
receiver is connected and “Enable GPS” is
checked, the iGPS position will be the point of
origin.
1. The Origin is shown as a green line.
2. The Destination is shown as a red line.
3. The Route is shown as a blue path between
origin and destination.
You can define the origin or the destination by
double clicking the place on the map. The map
scale is automatically adjusted so that the origin,
route, and path are all visible.
Select this menu item to switch the Origin and
Destination of a calculated route.
This will also recalculate the text turn-by-turn
directions in the Directions screen in the View
menu.
Note: The reverse route may be different than the
original route because of divided roads and oneway streets.
Page 9
Ostia User Manual
5.1.3 View
View Menu Items Description
Full Map
Destination
Origin
Full Route
Clear Route
Direction
Map
Select this menu item to view the entire map
currently open.
Select this menu item to display the currently
defined destination. Selecting this function may
change the map scale.
Select this menu item to display the currently
defined origin. Selecting this function may
change the map scale.
Select this menu item to display the currently
defined full route. Selecting this function may
change the map scale.
Select this menu item to clear the currently
defined full route. Note: Clearing the route also
clears the origin and destination.
Select this menu item to display turn-by-turn
driving directions in text format.
Select this menu item to return to the map
view.
Note: Destination, Origin and Full Route functions are valid only if “Enable GPS” is not
checked.
Page 10
Ostia User Manual
5.1.4 GPS
Enable GPS
GPS Info.
Sat. Info.
Setup
Check this menu item to enable the GPS
receiver.
You should check it only when the iGPS receiver
is properly connected to your Pocket PC. The
GPS icon (a red arrow) will be displayed on the
map indicating your current position. Uncheck
Enable GPS will disable the GPS tracking
function.
Select this menu item to display the current
direction, speed, longitude, latitude, local time
and “vision” (line of sight) distance to the
destination according to the received GPS
data.
Select this menu item to display the locations
of the GPS satellites serving your area. The top
portion of the display shows a constellation view
of nearby GPS satellites. The center of the circle
is the zenith of your position. The bottom portion
of the display shows the signal quality for each
satellite.
Select this menu item to automatically
configure the software to use either the iGPS180 mobile receiver or the iGPS-CF portable
receiver.
Map
Page 11
Select this menu item to return to the view of
the map(s) that are currently open.
Ostia User Manual
5.1.5 Options
Auto Re-route
Heading Up
Voice Off
Max. Maps
Select Comm.
Restore Default
Select this menu item to have the program
automatically re-route you when you travel off
of the calculated route.
Select this menu item to change the
orientation of the map. With Heading Up
selected, the map will be oriented so that in
general, your position indicator is moving towards
the top of the screen.
With Heading Up not selected, the map is oriented
to that North is always at the top of the screen.
Select this menu item to turn the Voice Prompt
on/off.
Select this menu item to set the maximum
amount of maps you can open at the same
time. A maximum of 10 maps can be set in this
option. Depending on your device the more maps
that are open may affect the processor speed.
Select this menu item to manually set the
communication port the software is to read the
GPS receiver on.
Select this menu item to restore the GPS
settings back to the original.
Page 12
Ostia User Manual
One Touch Re-Route: If you find yourself off-route (voice prompts will let you know that
you are off-route while you are traveling), simply push the Action Button* on your
Pocket PC to calculate a new route from your curr ent location to the destination.
*Note: The Action Button may differ fr om one Pocket PC to another.
5.2 View controls
Here are some tips for controlling map viewing. You may find other techniques unique
to your Pocket PC that allows you to change the current m ap view.
Zoom In
Zoom Out
View a
smaller
section of
the map
with more
detail.
View a
larger
section of
the map
with less
detail.
To zoom in for a more detailed view, use
your stylus to draw a rectangle on the
map (from upper left to lower right). A
best-fit scale is used to display the
enclosed rectangular area on your Pocket
PC screen.
To zoom out, use your pointing device to
make a line from lower left to upper right.
SECTION 6: Tips on Getting Started
Try the following exercise to develop and practice your map skills
• Set your home as a route origin.
• Set the nearest friend’s home as a r out e dest inat ion.
• Find the route between your home and friend’s home
• Enable Simulation Mode to experience car navigat ion virtually.
SECTION 7: GPS (optional)
Two ultra compact, lightweight, integrated types of GPS receiver ( iG PS-180 and iGPSCF) are available from Pharos as an option. T he iGPS receivers feature rapid
positioning, instant reacquisit ion, low power consumption, and a water resistant
enclosure.
7.1 Required Components for a Pocket PC Navigator System
• Windows CE based Pocket PC or Handheld PC
• Ostia Software
•
iGPS receiver *
*The iGPS receiver PocketPak and instructions are available in kit form for most models of
Windows CE based Pocket PC’s. See your dealer or our website
(http://www.pharosgps.com) for details.
Page 13
Ostia User Manual
7.2 Installing GPS
iGPS-180
1. Place the iGPS-180
receiver on the
dashboard of the
vehicle close to the
windshield.
2. Plug the cigarette
lighter adaptor into
the lighter socket of
your vehicle.
3.
Plug the serial
adaptor cable into
the Pocket PC’s
serial port socket.
iGPS-CF
1. Insert the iGPS-CF
into the Compact
Flash Card port of
the Pocket PC. If
the Pocket PC has a
PCMCIA port, attach
the PCMCIA adapter
to the iGPS-CF and
insert it into the port.
PDA
Serial
Adaptor
Cable
i GPS-180
Cigarette
Lighter
Adaptor
Figure 5
Adaptor
Junction
Box
Page 14
Ostia User Manual
7.3 Using GPS
The map sample (Figure 6) shows
the driving route (blue path) and
the iGPS receiver indicator (red
arrow). The arrowhead indicates
the direction of travel.
2 (two) steps are required to use
an iGPS receiver with Ostia
software.
1. Connect the iGPS receiver to
your Pocket PC using the
instructions in section 7.2
2. Enable the iGPS receiver
function. (See section 5.1.4
As you travel, the iGPS receiver
constantly monitors incoming
signals from the GPS satellites,
calculates your present position
and updates the GPS symbol on
your map.
.
)
Figure 6
iGPS-CF™ User’s Tips
1. Turn on your iGPS-CF™ in an open place.
2. Stay still for approximately one minute for your iGPS- CF™ to initially
acquire enough satellites to give you an accurate position. It may take
longer if you are moving.
3. If the satellite signals cannot be found (for instance, in an urban area), the
following steps are suggested:
a. If you are in a car, plug the external active antenna into iGPS-CF™
and place the antenna as close to the windshield as possible or on
the roof.
b. Move to an open space or point iGPS-CF™ toward an open sky
with less blockages.
4. iGPS-CF™ comes with a built-in battery for faster position acquisition.
The battery lasts about 4 days. Please recharge the battery for about 4
hours regularly.
5. Please have PDA recharged when either the COM port or iGPS-CF™ is
not recognized by the PDA due to low battery problem in PDA.
Page 15
Ostia User Manual
6. Handle the MMCX connector carefully (hold the metal part not the cable)
when plug or unplug the active antenna.
7. Do not leave the unit under the sun for a long period of time.
8. iGPS-CF™ receiver’s performance may be affected by:
a. Tinted metallic windows
b. Under high raised buildings, bridges, or in tunnels
c. Near high voltage cables, CB radios, or radio base stations
d. CD ROM player
e. Solar flare activities
SECTION 8: Troubleshooting
See the Ph aros we bsite (http ://www.pharosgps.com) for FAQ’s, tips,
troubleshooting and latest updates.
SECTION 9: Technical Support
Pharos Science and Applications, Inc.
http://www.pharosgps.com
411 Amapola Avenue, Torrance, CA 90501-1478, USA
Phone: 310-212-7088
Fax: 310-320-1808
Email: support@pharosgps.com
Telephone technical support is available Monday through Friday between the
hours of 9:00 AM to 5:00 PM Pacific Standard Time.
SECTION 10: System Requirements
10.1 Pocket PC/Handheld PC Requirements
Processor Type: MIPS, SH3, StrongArm
Operating System: Windows CE Version 2.11 or later
Memory: 2.5 MB
Compact Flash card or Multimedia card memory: 20 MB minimum
10.2 Desktop/Laptop Requirements
CPU: Pentium class
Operating System: Windows 95/98/ME/NT/2000
Available hard drive space: 20 MB minimum for map installation to PDA.
Ostia maps vary in size from less than 1 MB to as large as 22 MB. The
Page 16
Ostia User Manual
Ostia Continental USA maps are made up of 260 map segments, separated
into geographical and municipality boundary divided sections.
Page 17
Loading...