PACKAGE CONTENTS:
1xUniversal Fan Controller:
V 1.0
1x 400mm 4-pin Motherboard cable:
1x 400mm SATA cable:
1x Manual Remote:
1x Velcro Tape:
TECHNICAL SPECIFICATIONS:
Dimension controller (WxHxD) 102 x 38 x 17 mm
Dimension remote (WxHxD) 48 x 20 x 8 mm
Power input SATA Cable 12V
Input signal PWM signal / DC signal / Manual remote / No signal
Output signal 1x White Universal 4 / 3-pin 0-100% PWM / 3.8-12V DC
4x Black 4-pin 0-100% PWM
3x Black 3-pin 3.8-12V DC
Remote speeds 40% / 70% / 100%
Max. connector power output 1A
Max. total power output 4A
Max. power usage 48W
Warranty 2 years
UNIVERSAL FAN CONTROLLER
MANUAL
PLEASE CHECK WWW.PHANTEKS.COM/FAQ
FOR UP-TO-DATE INSTRUCTIONS AND COMPATIBILITY.
INSTALLATION:
UNIVERSAL FAN
CONTROLLER
STEP 1.
Choose for (A) MANUAL CONTROL or (B) MOTHERBOARD CONTROL.
A. Connect Manual Remote to the INPUT port.
B. Connect 4-pin Motherboard Cable to the INPUT port.
STEP 2.
Connect the SATA Cable to
the SATA port.
TO POWER SUPPLY
STEP 3.
Connect all fans to the
corresponding output connector.
We recommend to always connect Fan 1.
The Fan 1 connector will provide the rpm
signal to the motherboard.
3-pin Fan
4-pin Fan
(A) Manual Remote
(B) Motherboard Cable
(A)
(B)
UNIVERSAL
4-pin / 3-pin Fan
The motherboard output can be both
PWM or DC signal. The Fan Controller
will automatically translate the signal
for each 4-pin and 3-pin fan.
Conveniently control both 4-pin PWM and 3-pin DC fans with a single controller
with the manual remote (software-free) or synced to your motherboard.
Speed control with a 3-button remote for silent/balanced/high performance mode.
Plug and play thanks to manual control.
Option to sync with your motherboard.
Automatically adapts to PWM and DC input signals and fans.
Mount the remote anywhere with the included velcro tape.
Route the remote through an available pass-through (e.g. PCI slot)
to place the remote outside of your computer enclosure.
MANUAL REMOTE FAN CONTROLLER
40%
70%
100%
INTEGRATED MAGNETS VELCRO TAPE