PLEASE CHECK WWW.PHANTEKS.COM/FAQ
FOR UP-TO-DATE INSTRUCTIONS AND COMPATIBILITY.
UNIVERSAL FAN C ONTROLLER
MANUAL
PACKAGE CONTENTS:
TECHNICAL SPECIFICATIONS:
1x 400mm 4-pin Motherboard cable:
1x 400mm SATA cable:
1xUniversal Fan Controller:
1x Manual Remote:
1x Velcro Tape:
Dimension controller (WxHxD) 102 x 38 x 17 mm
Dimension remote (WxHxD) 48 x 20 x 8 mm
Power input SATA Cable 12V
Input signal PWM signal / DC signal / Manual remote / No signal
Output signal 1x White Universal 4 / 3-pin 0-100% PWM / 3.8-12V DC
4x Black 4-pin 0-100% PWM
3x Black 3-pin 3.8-12V DC
Remote speeds 40% / 70% / 100%
Max. connector power output 1A
Max. total power output 4A
Max. power usage 48W
Warranty 2 years
V 1.0
UNIVERSAL FAN
CONTROLLER
Speed control with a 3-button remote for silent/balanced/high performance mode.
Plug and play thanks to manual control.
Option to sync with your motherboard.
Automatically adapts to PWM and DC input signals and fans.
Mount the remote anywhere with the included velcro tape.
40%
70%
100%
MANUAL REMOTE FAN CONTROLLER
INTEGRATED MAGNETS VELCRO TAPE
INSTALLATION:
The Fan 1 connector will provide the rpm
signal to the motherboard.
STEP 2.
Connect the SATA Cable to
the SATA port.
STEP 3.
Connect all fans to the
corresponding output connector.
We recommend to always connect Fan 1.
3-pin Fan
TO POWER SUPPLY
STEP 1.
Choose for (A) MANUAL CONTROL or (B) MOTHERBOARD CONTROL.
A. Connect Manual Remote to the INPUT port.
B. Connect 4-pin Motherboard Cable to the INPUT port.
Conveniently control both 4-pin PWM and 3-pin DC fans with a single controller
with the manual remote (software-free) or synced to your motherboard.
Route the remote through an available pass-through (e.g. PCI slot)
to place the remote outside of your computer enclosure.
(A) Manual Remote
(B) Motherboard Cable
(A)
(B)
4-pin Fan
UNIVERSAL
4-pin / 3-pin Fan
The motherboard output can be both
PWM or DC signal. The Fan Controller
will automatically translate the signal
for each 4-pin and 3-pin fan.
Loading...