Page 1
Manual V1.0
GLACIER ONE HIGH PERFORMANCE CLOSED LOOP CPU LIQUID COOLER
1. Package Contents
GLACIER ONE 240 MP
• Innity Mirror Cap
• 240 Radiator
• 2x 120mm MP Fans
GLACIER ONE 240 MPH
• Innity Mirror Cap
• 240 Radiator
• 2x 120mm MP Fans
• 2x D-RGB Halos Fan Frames
GLACIER ONE 280 MP
• Innity Mirror Cap
• 280 Radiator
• 2x 140mm MP Fans
Accessories (for all models)
4-Pin PWM Splitter Cable, 2x
80mm
4-Pin Fan PWM Extension Cable,
500mm
3-Pin D-RGB Motherboard
Adapter, 600mm
PH-NDC Thermal Compound
3x Tube Clips
GLACIER ONE 360 MP
• Innity Mirror Cap
• 360 Radiator
• 3x 120mm MP Fans
Screws:
4x AM4 Stand-o
4x 115x/1200 Stand-o
4x 2066 Stand-o
4x Thumb Nut
8x/12x 34mm Halos Screws
(MPH model only)
Intel 115x/1200/1366
Backplate
AMD AM4 Bracket
(Intel Bracket is pre-installed)
8x/12x 31mm Fan Screws
8x/12x 5mm Radiator Screws
8x/12x Washers
Page 2
2. Motherboard preparation (follow instructions for the corresponding socket)
AMD Socket AM4
A) Remove the stock mounting brackets
B) Secure the 4x AM4 Stand-os to the motherboard
INTEL Socket 115X / 1200 / 1366
A) Prepare the Intel Backplate for the correct socket
1366
115x/1200
B) Secure the 4x 115x/1200/1366 Stand-os
to the motherboard and Intel Backplate
4 x
4 x
INTEL Socket 2011 & 2066
A) Secure the 4x Intel 2011/2066 Stand-os to the motherboard
4 x
Page 3
3. Installing the pump block
A) This step is for AMD AM4 socket only
(for Intel socket installation, go to step 3B)
B) Secure the pump unit to the
stand-os on the motherboard
with the 4x Thumb Nuts
2.
1.
3.
Remove the Intel bracket
from the pump
1. Push the Intel bracket in
2. Rotate to loosen
Secure the AMD AM4
Bracket to the pump
4. push the AMD bracket in
5. rotate to fasten the bracket
5.
4.
3. pull the bracket o
4. Mount the radiator and fans
4 x
The thermal compound is pre-applied.
More thermal compound is included for
future installations
We recommend to install the fans to the radiator before
mounting it into the chassis.
3 Types of screws are included to mount the radiator and
the fans in dierent options:
Use the 5mm radiator screw to mount the radiator
directly to the chassis
Use the 31mm fan screw to mount the fan to the
radiator (and chassis)
Use the 34mm Halos screw to mount the Halos and
fans to the radiator (and chassis)
MPH model only
Option A:
5mm radiator screw
31mm fan screw
Option B:
31mm fan screw
Option C (MPH model only):
5mm radiator screw
Use the optional washers if necessary on the
chassis for a secure t
34mm Halos screw
Page 4
Loading...