Phanteks Eclipse P600S Satin Black User Manual

Download

USER MANUAL V1.0

Thank you

for choosing

1. WHAT’S INSIDE?

TABLE OF CONTENTS

Introduction

Specications

Exploded View

Accessories

2. CHOOSE YOUR SETUP

Congure your P600S

Get Started

Installing the Motherboard

Installing the Power Supply

Installing Fans

Connecting the Fan Hub

Installing Drives

Installing Water Cooling

Radiator Installation

Pump/Reservoir Installation

Installing GPU Anti-Sag Bracket

Connecting Front I/O

Cable Management

Matienance

Optional Upgrades:

Installing A Vertical GPU

Installing A Dual System

3. SUPPORT

Warranty

INTRODUCTION

Welcome to Phanteks!

The P600S combines the best of 2 worlds with its high quality sound dampening panels and the ultra high

airow fabrics from Phanteks. Achieving both a quiet system and a high airow conguration.

The durable fabric, carefully selected by Phanteks, results in a much lower airow resistance compared to

standard mesh panels. Keeping air speed higher and noise levels lower.

Phanteks believes that meaningful designs are created through

the fusion of form and function.

The Phanteks team

SPECIFICATIONS

CASE SPECIFICATIONS INCLUDED ACCESSORIES

Dimension

(WxHxD)

Form Factor

Materials

MB Support

Front I/O

Side Window

240 mm x 520 mm x 510 mm (9.45 in x 20.5 in x 20.1 in)

Mid-Tower

Powder coated steel chassis

Sound Dampening Panels

Tempered glass side panel

E-ATX, ATX, Micro-ATX, Mini ITX

Power button, 2x USB 3.0,

Microphone, Headphone, Reset Button,

USB 3.1 GEN 2 Type-C

Yes, Tempered glass

PCI SLOTS & DRIVE BAYS

PCI slots

Internal 3.5”

Internal 2.5”

FAN

Front

Top

Rear

10x (4 included)

3x (3 included)

120 MM

3x 3x (2 installed)

3x 2x

1x 1x (1 installed)

140 MM

Premium Fan 140mm

Universal Fan Hub

3.5” Stackable HDD Bracket

Vertical GPU Mount

Accessory Bag

GPU Anti-Sag Bracket

Airow Cover

Toolbox

CLEARANCE

E-ATX Motherboard width

CPU Cooler Clearance

GPU Clearance

Front Radiatior Clearance

Top Radiator Clearance

SUPPORT

Contact (International)

Contact (America)

Warranty

3x (installed)

1x (installed)

280mm (11.1 in)

190 mm (7.48 in)

435 mm (17.24 in)

95 mm (3.74 in)

65 mm (2.56 in)

support@phanteks.com

support@phanteksusa.com

5 Years*

RADIATOR

Front

Top

Rear

120 MM

Up to 360 Up to 420

Up to 360 Up to 280

120 140

140 MM

*see page 31

1. Chassis

2. Front Panel

3. Top Panel

4. Side Panels

5. Radiator Bracket

6. PSU Bracket

7. Front Silent Cover

8. Top Silent Cover

9. Airow Cover

10. Front Dust Filter

11. PSU Filter

EXPLOADED VIEW

ACCESSORIES

3.5” MODULAR HDD BRACKET

- 4 included in accessory box

- For 3.5” or 2.5” Drive

VERTICAL GPU MOUNT

- Included in accessory box

- Riser Cable is sold separately

ACCESSORY BAG AND TOOLBOX

GPU Anti-Sag Bracket

6x Zip Tie 150mm

Phanteks Logo Badge

6-32x6 mm

Hex screw

PREMIUM FAN 140 MM

- 3 Pre-installed

- Hight static pressure

- Silent operation

AIRFLOW COVER

- Included in accessory box

- Magnetic

ToolboxAccessory bag

M3x5 mm

Motherboard /

SSD screw

22x

6-32x6 mm

Thumb screw

Fan screw

12x

6-32x5 mm

Case screw

Motherboard

Stando + tool

6-32x9 mm

HDD screw

Riser Cable

screw

12x 6x 16x 3x7x

CONFIGURE YOUR P600S

The P600S has the most versatile chassis design, providing you with a myriad of

options. With so many possibilities to pick from, you can use this overview to choose

and plan the best conguration for your build.

AIR COOLING- P13.

STORAGE - P15.

WATERCOOLING - P18.

DUAL SYSTEM - P27.

CONFIGURE YOUR P600S

The P600S can be transformed from a Silent to a High Airow conguration. The magnetic front and top Silent Covers

can be easily removed or installed. By removing the Silent Covers the air intake and outtake surface area is increased

dramatically, allowing a much higher cooling capacity.

Heavy and sound dampening panels reduce noise

levels and improve acoustics.

High performance fabric from Phanteks enhances

the cooling performance while lowering noise

levels.

GET STARTED

PREPARATIONS

The P600S case is designed to support installation in a standing position.

Don’t turn on the power to your system until installation is complete.

Discharge your body’s static electric charge by touching a grounded surface

before performing any hardware procedure.

Make sure to consult the manuals of your hardware before installation.

If you do not feel comfortable with performing the installation

procedure, consult a qualified computer technician.

REMOVING FRONT PANEL

REMOVING TOP PANEL

LOOSEN:

GET STARTED

REMOVING SIDE PANEL

Open the side panel more than 90 degrees and lift it up near the hinges.

INSTALLING MOTHERBOARD

Use the motherboard screws from the toolbox to install your motherboard on the

pre-installed standos.

REQUIRES:

STANDOFF POSITIONING

ATX / E-ATX (Pre-installed)

Micro ATX (install extra standos)

Some motherboards require installation

or repositioning of the standoffs. Please

consult your motherboard manual for the

correct standoff positioning.

For repositioning standos

By loosening the thumb screws you can slide

the Cable Covers left and right for optimal cable

management.

These standos have a special collar to keep the

motherboard in place when installing vertically.

INSTALLING POWER SUPPLY

The power supply can be installed by removing the PSU bracket on the rear of the

case chassis.

REQUIRES:

LOOSEN:

Connect all needed cables to the

power supply before installing it in the case.

INSTALLING FANS

Congure your airow-path with this overview. All fan locations support both 120mm and

140mm fans.

Install the magnetic Airow Cover to prevent air from re-circulating when

you install 2x 120 mm or 2x 140 mm fans.

TOP

140 FAN

120 FAN

LOOSEN:

AIRFLOW COVER

REAR

REQUIRES:

FRONT

140 FAN

120 FAN

140 FAN

120 FAN

INSTALLING FANS

CONNECTING THE UNIVERSAL FAN HUB

CONNECT THE FAN HUB 4PIN INPUT CABLE TO YOUR

MOTHERBOARD FAN HEADER

CONNECT EXTRA FANS TO THE CORRESPONDING CONNECTOR

ON THE UNIVERSAL FAN HUB

CONNECT THE SATA CABLE TO THE POWER SUPPLY

You can choose a PWM or DC output in the

motherboard settings. The Fan Hub will

automatically translate the signal to all connected

3- and 4-pin fans. Check WWW.PHANTEKS.COM/

FAQ for more technical details.

Choosing a PWM output provides the most

customization options in the motherboard

settings.

TO MOTHERBOARD

FAN HUB INPUT

TO PSU

SATA

BLACK 3-PIN DC

BLACK 4-PIN PWM

WHITE 3-/4-PIN

UNIVERSAL

Expand the number of fans with splitter

cables up to a maximum of 4A total power.

Splitter cables are sold separately:

PH-CB-Y4P / Y3P

The White Connector will provide

the RPM signal to the

motherboard.

INSTALLING DRIVES

2.5” SSD INSTALLATION

Install the SSD in to the SSD brackets before placing them in the chassis.

Make sure to install the screws into the SSD

once it rests in the SSD bracket to secure its

position.

REQUIRES:

195mm PSU Clearance

250mm PSU Clearance

INSTALLING DRIVES

3.5” HDD INSTALLATION

4x Phanteks Stackable 3.5” HDD Brackets are included.

Additional brackets are sold separately (PH-HDDKT_03).

The HDD bracket can also house

a 2.5” SSD instead of a 3.5” HDD.

HDD INSTALLATION STACK / INSTALL REMOVE

HDD

Each HDD bracket can be stacked together to oer more exibility.

BOTTOM COMPARTMENT

The Bottom Compartment can house up to 2 or 4 Stackable HDD trays. Using Position B will not limit

PSU or Front radiator clearance.

REQUIRES:

1. LIFT UP LATCH

2. PULL OUT

POSITION A+C

POSITION B

MAIN COMPARTMENT

Up to 6 Stackable HDD Brackets can be installed in the main compartment.

REQUIRES:

REMOVE THE CABLE COVERS TO

REVEAL THE HDD MOUNTS

REMOVE:

SECURE WITH 2 THUMBSCREWS

MOUNT THE SINGLE / STACKED HDD

BRACKETS IN POSITION

STACKSTACKSTACK

Stack the HDD brackets before

mounting if you install more than

1x bracket.

INSTALLING WATER COOLING

REQUIRES:

TOP

12 0 FORM FACTOR

120

240

360

REAR

12 0 FORM FACTOR

120

14 0 FORM FACTOR

140

14 0 FORM FACTOR

140

280

Use the Airow Cover

to prevent hot air from

circulating.

FRONT

12 0 FORM FACTOR

120

240

360

14 0 FORM FACTOR

140

280

420

TOP

MAX. RADIATOR CLEARANCE

140mm Radiators: A:405mm B:146mm C:65mm

120mm Radiators: A:405mm B:126mm C:65mm*

*If the motherboard and its components (e.g. memory) are 50mm or

lower there is no limit in Radiator thickness.

TOP

FRONT

MAX. RADIATOR CLEARANCE:

A:465mm B:148mm C:95mm

easier. The port diameters are 20.5mm.

Phanteks Passthrough tting: PH-PTF_BK/CR_G1/4

Phanteks Ball-Valve tting: PH-BVA_BK/CR_G1/4

FILL PORT

FRONT

Installing a ll port in the top radiator bracket

and/or a drain port in the front of the case

makes water cooling maintenance much

DRAIN PORT

Reservoir mounting points are accessed

by removing the Cable Covers.

INSTALLING WATER COOLING

26mm

REMOVE:

OPTIONAL PUMP BRACKET

The universal Pump Bracket can be installed in the bottom

compartment using 4 case screws.

Pump Bracket sold separately

(PH-PUMBKT_01)

INSTALLING GPU ANTI-SAG BRACKET

To prevent your GPU from tipping down you can install the GPU Anti-Sag Bracket.

REQUIRES:

INSTALLING GPU ANTI-SAG BRACKET

INSTALL ALL GPU AND PCI CARDS

PLACE THE GPU ANTI-SAG BRACKET

INSERT THE THUMBSCREWS WITHOUT

TIGHTENING THEM

PRESS DOWN AND LOCK THE THUMBSCREWS

IN POSITION.

Always loosen the 2 thumb screws

before removing any GPU or PCI cards.

Hold the GPU in the correct position when

tightening the thumbscrews.

CONNECTING FRONT I/O

Please consult the motherboard manual for additional instructions.

Please make sure to consult your

motherboard manual before connecting

your front I/O.

TO MOTHERBOARD

POWER BUTTON

Power SW

POWER LED

Power LED

2X USB 3.0

USB 3.0

RESET BUTTON

Reset SW

HEADPHONE

MICROPHONE

AUDIO

USB 3.1 GEN 2 TYPE-C

CABLE MANAGEMENT

Use the double-loop Velcro ties to route your cables. Zip ties are included in the accessory bag to

manage any excess cables.

Use the double-loop Velcro ties to

split the cables into 2 channels.

MAINTENANCE

The P600S is equipped with a front and bottom PSU lter. We recommend to clean these

lters every month to keep your cooling performance optimized.

PSU DUSTFILTER

FRONT DUSTFILTER

If cleaning the dust filters with water,

make sure to properly dry them before

placing them back.

The high-performance fabric on the front and top of the P600S acts as an extra dust

lter and can be easily cleaned with a vacuum cleaner. There is no need to remove the

panels from the case.

The high-performance fabric from Phanteks

is made from durable nylon to resist wear-

and-tear for a long period of time.

OPTIONAL UPGRADES

3.5” STACKABLE HDD BRACKETS PH-HDDKT_03

For 3.5” or 2.5” Drive

Upgrade up to 6x additional 3,5” HDDs with the

optional HDD brackets.

Contains 2x Stackable HDD Brackets.

Page 15

HIGH STATIC PRESSURE MP FAN PH-F120MP / PH-F140MP

More fans can be installed in the P600S and

connected to the Universal Fan Hub.

Page 12

Y-SPLITTER CABLES PH-CB-Y4P / PH-CB-Y3P

4-pin / 3-pin Fan splitters

Using splitter-cables you can install more

than 8 fans to the Universal Fan Hub.

Page 13

CABLE EXTENSION SET PH-CBCMBO

- Available in multiple colors

- Includes clear cable combs

- Also available as separate cables

Included cables:

- Motherboard 24-pin

- CPU 4+4-pin

- 2x GPU 6+2-pin

220mm Slimline PCI-e x16 Riser Cable 90° PH-CBRS_SL22

220mm Premium Shielded High Speed PCI-e x16 Riser Cable 90° PH-CBRS_PR22

220mm Flatline PCI-e x16 Riser Cable 90° PH-CBRS_FL22

With the optional Riser Cable you can place any 2-slot or 3-slot GPU vertically.*

Page 27

* For System 1 only.

Revolt X Power Supply PH-P1000PS / PH-P1200PS

The Revolt X power supply unlocks the Dual System Conguration.

But also works great as a “single system” power supply.

Page 11

ITX Upgrade Kit PH-ITXKT_R01

The Streamer Kit contains an ITX bracket and a 600mm

X1 Riser Cable. This allows for an ITX motherboard in

the top of the chassis and a vertically placed PCI-e card.

Page 28

600mm Premium Shielded High Speed PCI-E x16 Riser Cable 90° PH-CBRS_PR6

With the optional Riser Cable you can place any 2-slot or 3-slot GPU vertically

for your 2nd ITX system. With 16 lanes and high quality shielding it maximizes

any GPUs’ performance.

Page 29

INSTALL RISER CABLE WITH 2X RISER CABLE SCREWS

Riser Cable sold separately

(PH-CBRS_SL22)

INSTALL VERTICAL GPU MOUNT WITH 2X HEX SCREWS

INSTALLING A VERTICAL GPU

REQUIRES:

The GPU Mount has 2 mounting

positions. Position A allows for better

air cooling and 3-slot GPU cards.

INSTALLING A DUAL SYSTEM

REMOVE THE TOP PANEL AND THE DUAL SYSTEM COVER

FROM THE CHASSIS

REMOVE:

INSTALL YOUR ITX MOTHERBOARD ON THE BRACKET

USING THE INCLUDED MOTHERBOARD SCREWS

CONNECT THE POWER

SWITCH AND LED CABLE

REQUIRES:

Screws are included in

the kit.

The Revolt X power supply from Phanteks is

required for this configuration.

TO ITX MOTHERBOARD

Power SW

Power LED

INSTALL THE ITX BRACKET

WITH 4X ITX BRACKET SCREWS

INSTALLING A DUAL SYSTEM

To minimize cable-clutter we recommend the following cable routing for the System 2 cables.

SYSTEM 2 CABLES

RISER CABLE

CPU CABLE

MOTHERBOARD CABLE

The Revolt X includes 2 dierent 24-pin Motherboard

cable lengths; 610mm and 710mm.

Use the longer, 710mm, 24-pin cable for the System 2

ITX motherboard.

SYSTEM 1

24-pin Motherboard

610 mm

SYSTEM 2

24-pin Motherboard

710 mm

INSTALL RISER CABLE ON THE VERTICAL GPU MOUNT

INSTALL VERTICAL GPU MOUNT

WITH 2 X SCREWS

MOVE VELCRO TIE

REQUIRES:

Depending on your needs, it’s not always

necessary to install a GPU for your second

system when your CPU is equipped with an

integrated GPU.

MOVE:

The GPU Mount has two mounting

positions. Position A allows for better

air cooling and 3-slot GPU cards.

CONNECT SATA CABLE

TO POWER SUPPLY

(only for X1 Riser cable)

SATA

As a Phanteks customer, you are priority number one. We have a dedicated team of

employees across the globe working hard every day to make sure we deliver the superior

experience you deserve. We are here for you. If you have a question or a concern about our

products, we have numerous ways you can reach us. Please choose one most convenient for

you to connect with our team.

CUSTOMER CARE

RMA AND TECHNICAL SUPPORT INTERNATIONAL

Email : support@phanteks.com

Facebook : @Phanteks

RMA AND TECHNICAL SUPPORT AMERICAS

Hours : Monday-Friday 9:00-5:00 PST

Phone number : +1(909)598-2115

Email : support@phanteksusa.com

Facebook : @Phanteks

For up-to-date information please check www.Phanteks.com

Eclipse P600S

PRODUCT PAGE

PHANTEKS

FACEBOOK PAGE

WARRANTY

PHANTEKS warrants its products to be free from defects in material and workmanship during

the warranty period; when given normal, proper and intended usage. If a product proves

to be defective in material or workmanship during the warranty period, PHANTEKS will,

at its sole option, repair or replace the product with same product or similar product. The

replacement product assumes the remaining warranty of the original product or 30 days,

whichever provides longer coverage for the customer.

DURATION OF WARRANTY:

1. Fans - 5 years

2. I/O Ports - 2 years

3. Fan Hub -2 years

4. LED Lighting - 2 years

5. Buttons - 2 years

6. Chassis - 5 years

7. Front and Top Panels - 5 years

Please check www.phanteks.com/Warranty for more information.

Phanteks Eclipse P600S Satin Black User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual