Phanteks Eclipse P600s User Manual

Download

Page 1

USER MANUAL V1.0

Page 2

Page 3

Thank you

for choosing

Page 4

TABLE OF CONTENTS

Introduction

Specications

Exploded View

Accessories

Congure your P600S

Get Started

Installing the Motherboard

Installing the Power Supply

Installing Fans

Connecting the Fan Hub

Installing Drives

Installing Water Cooling

Radiator Installation

Pump/Reservoir Installation

Installing GPU Anti-Sag Bracket

Connecting Front I/O

Cable Management

Matienance

Optional Upgrades:

Installing A Vertical GPU

Installing A Dual System

Warranty

1. WHAT’S INSIDE?

2. CHOOSE YOUR SETUP

3. SUPPORT

Page 5

INTRODUCTION

Welcome to Phanteks!

The P600S combines the best of 2 worlds with its high quality sound dampening panels and the ultra high

airow fabrics from Phanteks. Achieving both a quiet system and a high airow conguration.

The durable fabric, carefully selected by Phanteks, results in a much lower airow resistance compared to

standard mesh panels. Keeping air speed higher and noise levels lower.

Phanteks believes that meaningful designs are created through

the fusion of form and function.

The Phanteks team

Page 6

Dimension

(WxHxD)

Form Factor

Materials

MB Support

Front I/O

Side Window

PCI slots

Internal 3.5”

Internal 2.5”

Front

Top

Rear

Front

Top

Rear

Premium Fan 140mm

Universal Fan Hub

3.5” Stackable HDD Bracket

Vertical GPU Mount

Accessory Bag

GPU Anti-Sag Bracket

Airow Cover

Toolbox

E-ATX Motherboard width

CPU Cooler Clearance

GPU Clearance

Front Radiatior Clearance

Top Radiator Clearance

Contact (International)

Contact (America)

Warranty

240 mm x 520 mm x 510 mm (9.45 in x 20.5 in x 20.1 in)

Mid-Tower

Powder coated steel chassis

Sound Dampening Panels

Tempered glass side panel

E-ATX, ATX, Micro-ATX, Mini ITX

Power button, 2x USB 3.0,

Microphone, Headphone, Reset Button,

USB 3.1 GEN 2 Type-C

Yes, Tempered glass

10x (4 included)

3x (3 included)

3x 3x (2 installed)

3x 2x

1x 1x (1 installed)

Up to 360 Up to 420

Up to 360 Up to 280

120 140

3x (installed)

1x (installed)

280mm (11.1 in)

190 mm (7.48 in)

435 mm (17.24 in)

95 mm (3.74 in)

65 mm (2.56 in)

support@phanteks.com

support@phanteksusa.com

5 Years*

CASE SPECIFICATIONS INCLUDED ACCESSORIES

CLEARANCE

SUPPORT

PCI SLOTS & DRIVE BAYS

FAN

RADIATOR

120 MM

140 MM

*see page 31

SPECIFICATIONS

Page 7

1. Chassis

2. Front Panel

3. Top Panel

4. Side Panels

5. Radiator Bracket

6. PSU Bracket

7. Front Silent Cover

8. Top Silent Cover

9. Airow Cover

10. Front Dust Filter

11. PSU Filter

EXPLOADED VIEW

Page 8

ACCESSORY BAG AND TOOLBOX

ACCESSORIES

3.5” MODULAR HDD BRACKET

- 4 included in accessory box

- For 3.5” or 2.5” Drive

PREMIUM FAN 140 MM

- 3 Pre-installed

- Hight static pressure

- Silent operation

VERTICAL GPU MOUNT

- Included in accessory box

- Riser Cable is sold separately

AIRFLOW COVER

- Included in accessory box

- Magnetic

GPU Anti-Sag Bracket

6x Zip Tie 150mm

Phanteks Logo Badge

ToolboxAccessory bag

Fan screw

M3x5 mm

Motherboard /

SSD screw

6-32x6 mm

Hex screw

Motherboard

Stando + tool

6-32x6 mm

Thumb screw

6-32x5 mm

Case screw

6-32x9 mm

HDD screw

Riser Cable

screw

12x

22x

12x 6x 16x 3x7x

Page 9

CONFIGURE YOUR P600S

STORAGE - P15.

DUAL SYSTEM - P27.

WATERCOOLING - P18.

AIR COOLING- P13.

The P600S has the most versatile chassis design, providing you with a myriad of

options. With so many possibilities to pick from, you can use this overview to choose

and plan the best conguration for your build.

Page 10

CONFIGURE YOUR P600S

High performance fabric from Phanteks enhances

the cooling performance while lowering noise

levels.

Heavy and sound dampening panels reduce noise

levels and improve acoustics.

The P600S can be transformed from a Silent to a High Airow conguration. The magnetic front and top Silent Covers

can be easily removed or installed. By removing the Silent Covers the air intake and outtake surface area is increased

dramatically, allowing a much higher cooling capacity.

Page 11

GET STARTED

PREPARATIONS

The P600S case is designed to support installation in a standing position.

Don’t turn on the power to your system until installation is complete.

Discharge your body’s static electric charge by touching a grounded surface

before performing any hardware procedure.

Make sure to consult the manuals of your hardware before installation.

If you do not feel comfortable with performing the installation

procedure, consult a qualified computer technician.

REMOVING TOP PANEL

REMOVING FRONT PANEL

LOOSEN:

Page 12

GET STARTED

REMOVING SIDE PANEL

Open the side panel more than 90 degrees and lift it up near the hinges.

Page 13

INSTALLING MOTHERBOARD

Some motherboards require installation

or repositioning of the standoffs. Please

consult your motherboard manual for the

correct standoff positioning.

STANDOFF POSITIONING

Micro ATX (install extra standos)

ATX / E-ATX (Pre-installed)

REQUIRES:

For repositioning standos

By loosening the thumb screws you can slide

the Cable Covers left and right for optimal cable

management.

These standos have a special collar to keep the

motherboard in place when installing vertically.

Use the motherboard screws from the toolbox to install your motherboard on the

pre-installed standos.

Page 14

INSTALLING POWER SUPPLY

LOOSEN:

REQUIRES:

The power supply can be installed by removing the PSU bracket on the rear of the

case chassis.

Connect all needed cables to the

power supply before installing it in the case.

Page 15

INSTALLING FANS

TOP

140 FAN

120 FAN

AIRFLOW COVER

140 FAN

120 FAN

FRONT

140 FAN

120 FAN

REAR

LOOSEN:

Congure your airow-path with this overview. All fan locations support both 120mm and

140mm fans.

Install the magnetic Airow Cover to prevent air from re-circulating when

you install 2x 120 mm or 2x 140 mm fans.

REQUIRES:

Page 16

INSTALLING FANS

SATA

The White Connector will provide

the RPM signal to the

motherboard.

WHITE 3-/4-PIN

UNIVERSAL

BLACK 4-PIN PWM

BLACK 3-PIN DC

Choosing a PWM output provides the most

customization options in the motherboard

settings.

You can choose a PWM or DC output in the

motherboard settings. The Fan Hub will

automatically translate the signal to all connected

3- and 4-pin fans. Check WWW.PHANTEKS.COM/

FAQ for more technical details.

Expand the number of fans with splitter

cables up to a maximum of 4A total power.

Splitter cables are sold separately:

PH-CB-Y4P / Y3P

CONNECT THE FAN HUB 4PIN INPUT CABLE TO YOUR

MOTHERBOARD FAN HEADER

CONNECT EXTRA FANS TO THE CORRESPONDING CONNECTOR

ON THE UNIVERSAL FAN HUB

CONNECT THE SATA CABLE TO THE POWER SUPPLY

CONNECTING THE UNIVERSAL FAN HUB

TO PSU

FAN HUB INPUT

TO MOTHERBOARD

Page 17

INSTALLING DRIVES

2.5” SSD INSTALLATION

Install the SSD in to the SSD brackets before placing them in the chassis.

REQUIRES:

Make sure to install the screws into the SSD

once it rests in the SSD bracket to secure its

position.

Page 18

HDD

REQUIRES:

3.5” HDD INSTALLATION

4x Phanteks Stackable 3.5” HDD Brackets are included.

Additional brackets are sold separately (PH-HDDKT_03).

The HDD bracket can also house

a 2.5” SSD instead of a 3.5” HDD.

Each HDD bracket can be stacked together to oer more exibility.

HDD INSTALLATION STACK / INSTALL REMOVE

1. LIFT UP LATCH

2. PULL OUT

195mm PSU Clearance

250mm PSU Clearance

POSITION A+C

POSITION B

INSTALLING DRIVES

BOTTOM COMPARTMENT

The Bottom Compartment can house up to 2 or 4 Stackable HDD trays. Using Position B will not limit

PSU or Front radiator clearance.

Page 19

STACKSTACKSTACK

REQUIRES:

Up to 6 Stackable HDD Brackets can be installed in the main compartment.

REMOVE THE CABLE COVERS TO

REVEAL THE HDD MOUNTS

SECURE WITH 2 THUMBSCREWS

REMOVE:

MOUNT THE SINGLE / STACKED HDD

BRACKETS IN POSITION

Stack the HDD brackets before

mounting if you install more than

1x bracket.

MAIN COMPARTMENT

Page 20

120 FORM FACTOR

140 FORM FACTOR

120

140

240

280

360

420

FRONT

REAR

140 FORM FACTOR

120

140

REQUIRES:

TOP

120 FORM FACTOR

140 FORM FACTOR

120

140

240

280

360

Use the Airow Cover

to prevent hot air from

circulating.

INSTALLING WATER COOLING

Page 21

FRONT

TOP

MAX. RADIATOR CLEARANCE

140mm Radiators: A:405mm B:146mm C:65mm

120mm Radiators: A:405mm B:126mm C:65mm*

*If the motherboard and its components (e.g. memory) are 50mm or

lower there is no limit in Radiator thickness.

TOP

FRONT

MAX. RADIATOR CLEARANCE:

A:465mm B:148mm C:95mm

Installing a ll port in the top radiator bracket

and/or a drain port in the front of the case

makes water cooling maintenance much

easier. The port diameters are 20.5mm.

Phanteks Passthrough tting: PH-PTF_BK/CR_G1/4

Phanteks Ball-Valve tting: PH-BVA_BK/CR_G1/4

DRAIN PORT

FILL PORT

Page 22

OPTIONAL PUMP BRACKET

26mm

Reservoir mounting points are accessed

by removing the Cable Covers.

REMOVE:

The universal Pump Bracket can be installed in the bottom

compartment using 4 case screws.

Pump Bracket sold separately

(PH-PUMBKT_01)

INSTALLING WATER COOLING

Page 23

Hold the GPU in the correct position when

tightening the thumbscrews.

INSTALLING GPU ANTI-SAG BRACKET

INSTALL ALL GPU AND PCI CARDS

PLACE THE GPU ANTI-SAG BRACKET

INSERT THE THUMBSCREWS WITHOUT

TIGHTENING THEM

PRESS DOWN AND LOCK THE THUMBSCREWS

IN POSITION.

INSTALLING GPU ANTI-SAG BRACKET

Always loosen the 2 thumb screws

before removing any GPU or PCI cards.

REQUIRES:

To prevent your GPU from tipping down you can install the GPU Anti-Sag Bracket.

Page 24

CONNECTING FRONT I/O

POWER BUTTON

2X USB 3.0

POWER LED

MICROPHONE

RESET BUTTON

Please make sure to consult your

motherboard manual before connecting

your front I/O.

Power LED

AUDIO

TO MOTHERBOARD

USB 3.0

Please consult the motherboard manual for additional instructions.

Power SW

Reset SW

USB 3.1 GEN 2 TYPE-C

HEADPHONE

Page 25

Use the double-loop Velcro ties to

split the cables into 2 channels.

Use the double-loop Velcro ties to route your cables. Zip ties are included in the accessory bag to

manage any excess cables.

CABLE MANAGEMENT

Page 26

MAINTENANCE

The P600S is equipped with a front and bottom PSU lter. We recommend to clean these

lters every month to keep your cooling performance optimized.

If cleaning the dust filters with water,

make sure to properly dry them before

placing them back.

PSU DUSTFILTER

FRONT DUSTFILTER

Page 27

The high-performance fabric from Phanteks

is made from durable nylon to resist wear-

and-tear for a long period of time.

The high-performance fabric on the front and top of the P600S acts as an extra dust

lter and can be easily cleaned with a vacuum cleaner. There is no need to remove the

panels from the case.

Page 28

3.5” STACKABLE HDD BRACKETS PH-HDDKT_03

CABLE EXTENSION SET PH-CBCMBO

- Available in multiple colors

- Includes clear cable combs

- Also available as separate cables

Included cables:

- Motherboard 24-pin

- CPU 4+4-pin

- 2x GPU 6+2-pin

HIGH STATIC PRESSURE MP FAN PH-F120MP / PH-F140MP

For 3.5” or 2.5” Drive

Upgrade up to 6x additional 3,5” HDDs with the

optional HDD brackets.

Contains 2x Stackable HDD Brackets.

Page 15

More fans can be installed in the P600S and

connected to the Universal Fan Hub.

Page 12

Y-SPLITTER CABLES PH-CB-Y4P / PH-CB-Y3P

4-pin / 3-pin Fan splitters

Using splitter-cables you can install more

than 8 fans to the Universal Fan Hub.

Page 13

OPTIONAL UPGRADES

Page 29

220mm Slimline PCI-e x16 Riser Cable 90° PH-CBRS_SL22

220mm Premium Shielded High Speed PCI-e x16 Riser Cable 90° PH-CBRS_PR22

220mm Flatline PCI-e x16 Riser Cable 90° PH-CBRS_FL22

600mm Premium Shielded High Speed PCI-E x16 Riser Cable 90° PH-CBRS_PR6

ITX Upgrade Kit PH-ITXKT_R01

With the optional Riser Cable you can place any 2-slot or 3-slot GPU vertically.*

Page 27

* For System 1 only.

With the optional Riser Cable you can place any 2-slot or 3-slot GPU vertically

for your 2nd ITX system. With 16 lanes and high quality shielding it maximizes

any GPUs’ performance.

Page 29

The Streamer Kit contains an ITX bracket and a 600mm

X1 Riser Cable. This allows for an ITX motherboard in

the top of the chassis and a vertically placed PCI-e card.

Page 28

Revolt X Power Supply PH-P1000PS / PH-P1200PS

The Revolt X power supply unlocks the Dual System Conguration.

But also works great as a “single system” power supply.

Page 11

Page 30

REQUIRES:

INSTALL RISER CABLE WITH 2X RISER CABLE SCREWS

INSTALL VERTICAL GPU MOUNT WITH 2X HEX SCREWS

Riser Cable sold separately

(PH-CBRS_SL22)

The GPU Mount has 2 mounting

positions. Position A allows for better

air cooling and 3-slot GPU cards.

INSTALLING A VERTICAL GPU

Page 31

The Revolt X power supply from Phanteks is

required for this configuration.

REQUIRES:

INSTALL YOUR ITX MOTHERBOARD ON THE BRACKET

USING THE INCLUDED MOTHERBOARD SCREWS

Power SW

TO ITX MOTHERBOARD

Power LED

Screws are included in

the kit.

REMOVE THE TOP PANEL AND THE DUAL SYSTEM COVER

FROM THE CHASSIS

CONNECT THE POWER

SWITCH AND LED CABLE

INSTALL THE ITX BRACKET

WITH 4X ITX BRACKET SCREWS

INSTALLING A DUAL SYSTEM

REMOVE:

Page 32

The Revolt X includes 2 dierent 24-pin Motherboard

cable lengths; 610mm and 710mm.

Use the longer, 710mm, 24-pin cable for the System 2

ITX motherboard.

SYSTEM 1

24-pin Motherboard

610 mm

710 mm

SYSTEM 2

24-pin Motherboard

INSTALLING A DUAL SYSTEM

To minimize cable-clutter we recommend the following cable routing for the System 2 cables.

SYSTEM 2 CABLES

RISER CABLE

CPU CABLE

MOTHERBOARD CABLE

Page 33

SATA

REQUIRES:

MOVE:

The GPU Mount has two mounting

positions. Position A allows for better

air cooling and 3-slot GPU cards.

INSTALL RISER CABLE ON THE VERTICAL GPU MOUNT

INSTALL VERTICAL GPU MOUNT

WITH 2 X SCREWS

CONNECT SATA CABLE

(only for X1 Riser cable)

MOVE VELCRO TIE

Depending on your needs, it’s not always

necessary to install a GPU for your second

system when your CPU is equipped with an

integrated GPU.

TO POWER SUPPLY

Page 34

As a Phanteks customer, you are priority number one. We have a dedicated team of

employees across the globe working hard every day to make sure we deliver the superior

experience you deserve. We are here for you. If you have a question or a concern about our

products, we have numerous ways you can reach us. Please choose one most convenient for

you to connect with our team.

CUSTOMER CARE

RMA AND TECHNICAL SUPPORT INTERNATIONAL

Email : support@phanteks.com

Facebook : @Phanteks

RMA AND TECHNICAL SUPPORT AMERICAS

Hours : Monday-Friday 9:00-5:00 PST

Phone number : +1(909)598-2115

Email : support@phanteksusa.com

Facebook : @Phanteks

For up-to-date information please check www.Phanteks.com

PHANTEKS

FACEBOOK PAGE

Eclipse P600S

PRODUCT PAGE

Page 35

PHANTEKS warrants its products to be free from defects in material and workmanship during

the warranty period; when given normal, proper and intended usage. If a product proves

to be defective in material or workmanship during the warranty period, PHANTEKS will,

at its sole option, repair or replace the product with same product or similar product. The

replacement product assumes the remaining warranty of the original product or 30 days,

whichever provides longer coverage for the customer.

DURATION OF WARRANTY:

1. Fans - 5 years

2. I/O Ports - 2 years

3. Fan Hub -2 years

4. LED Lighting - 2 years

5. Buttons - 2 years

6. Chassis - 5 years

7. Front and Top Panels - 5 years

Please check www.phanteks.com/Warranty for more information.

WARRANTY

Page 36

Page 37