Pfister Hanover 808 Series Manual
808 Series
Serie 808
Série 808
Tub & Shower • Shower Only
Trim Kit
Juego con acabado para
Tinas y duchas o ● duchas solamente
Bain et douche ● Douche seule
Kit de garniture
Lifetime Limited Mechanical & Pnish Warranty
Pster™
Covers Pnish and Pfunction for as Long as You
Own Your Home
(Commercial Applications Limit the Duration of the
Warranties as Provided Below)
Pster provides the following Warranties for its products. Proof of Purchase
may be required in order to obtain any of the benets set forth below.
Limited Warranties: Pster warrants that for as long as the original purchaser
owns the home in which the Pster product (the “Product”) is originally
installed, the Product will be free of all defects in material and workmanship
that would impair the intended and proper use of the Product. If the Product is
installed in a commercial application, the above mechanical warranty shall be
limited for a period of ten (10) years from the date of purchase of the Product.
Pster warrants against deterioration of the Product’s nish for as long as
the original purchaser owns the home in which the Product is originally
installed. If the Product is installed in a commercial application, the above
nish warranty for Products that do not contain the Pforever nish shall be
limited to a period of ve (5) years from the date of purchase.
Exclusive Remedy: In the event of any defect in the Product that breaches
the foregoing warranties, Pster, at its option, will repair or replace the
defective part of the Product. Repair or replacement of the Product is the
exclusive remedy.
For any remedy under this warranty, Pster is to be notied describing the
problem. In order to notify Pster and receive assistance or service under
this warranty, the original purchaser may: (1) call 1-800-Pfaucet (1-800732-8238) for a consumer service representative who can assist you, or (2)
write consumer service department c/o Pster Inc., 19701 DaVinci, Lake
Forest, CA 92610, and include a description of the problem, model number,
your name, address, phone number and approximate date of purchase, or (3)
email Pster’s customer service department by going to www.psterfaucets.
com, or (4) notify the location or distributor from which the Product was
purchased. In any case, you may be required to return the Product to Pster
for inspection and proof of purchase may be required.
Limitations and Exclusions:
PFISTER WILL NOT BE LIABLE FOR ANY OTHER DAMAGES
OR LOSSES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL
AND/OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE
LEGAL THEORY ASSERTED, INCLUDING ANY CLAIM OR BREACH
OF WARRANTY HEREUNDER OR ANY OTHER CAUSE, AND
WHETHER ARISING IN CONTRACT OR IN TORT (including negligence
and strict liability).
Pster has the right to discontinue or modify any product at any time. Some
states do not allow limitations or exclusions of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This
warranty gives you specic legal rights, and you may also have other rights
which vary from state to state.
The above warranties do not cover damage resulting from improper
maintenance, repair, cleaning or installation, misuse, abuse, alterations,
accidents or acts of God.
Garantía Mecánica y sobre el Acabado Limitada de por Vida
Pster™
Cubre las funciones y el acabado por el tiempo en que usted sea
propietario de su casa
(Las Aplicaciones Comerciales Limitan la Duración
de las Garantías)
Pster suministra las siguientes Garantías para sus productos. Es posible que
se requiera la presentación de una Prueba de compra para obtener cualquiera
de los benecios indicados a continuación.
Garantías Limitadas: Pster garantiza que por el tiempo en que el comprador
original sea propietario de la casa en el que se hubiese instalado inicialmente
el producto Pster (el “Producto”), este Producto estará libre de todo defecto
en material y mano de obra que pueda afectar el uso proyectado y correcto
del Producto. Si el Producto se instala en una aplicación comercial, la
garantía mecánica que antecede estará limitada a un período de diez (10)
años a partir de la fecha de compra del Producto.
Pster garantiza el acabado del Producto contra deterioro por el tiempo
en que el comprador original sea propietario de la casa en la que hubiese
instalado inicialmente el Producto. Si el Producto se instala en una
aplicación comercial, la garantía sobre el acabado que precede para
Productos que no contengan el acabado “Pforever” estará limitada a un
periodo de cinco (5) años a partir de la fecha de compra.
Recurso exclusivo: En el caso de que haya un defecto en el Producto que
viole las garantías que preceden, Pster, a su opción, reparará o reemplazará
la pieza defectuosa del Producto. La reparación o el reemplazo del Producto
es el recurso exclusivo.
Para todo recurso con respecto a esta garantía, Pster deberá ser noticado,
con una descripción del problema. Para noticar a Pster y recibir ayuda
o servicio bajo esta garantía, el comprador original puede: (1) llamar al
1-800-Pfaucet (1-800-732-8238) para hablar con un representante de servicio
al cliente que lo pueda ayudar, o (2) escribir al departamento de servicio
al consumidor, c/o Pster Inc., 19701 DaVinci, Lake Forest, CA 92610
U.S.A., e incluir una descripción del problema, el número del modelo, su
nombre, dirección, número de teléfono y fecha aproximada de compra, o
(3) enviar un e-mail al departamento de servicio al consumidor de Price
Pster entrando en la página web www.psterfaucets.com, o (4) avisarle al
lugar o al distribuidor en donde se compró el Producto. En cualesquiera de
los casos, podría pedírsele devolver el Producto a Pster para su inspección
y es posible que se requiera la presentación de una prueba de compra.
Limitaciones y Exclusiones:
PFISTER NO SE HARÁ RESPONSABLE DE NINGÚN OTRO DAÑO O
PERJUICIO, INCLUYENDO, PERO SIN ESTAR LIMITADO A DAÑOS
INCIDENTALES Y/O CONSECUENTES, SIN IMPORTAR LA TEORÍA LEGAL
A LA QUE SE ALEGUE, INCLUYENDO TODO RECLAMO O VIOLACIÓN DE
LA GARANTÍA PRESENTE O CUALQUIER OTRA CAUSA, Y YA SEAN COMO
RESULTADO DE LA LEY CONTRACTUAL O LA DE A NTECEDENTES
(incluyendo negligencia y responsabilidad estricta).
Pster tiene el derecho de discontinuar o modicar cualquier producto en
cualquier momento. Ciertos estados no permiten limitaciones o exclusiones
de daños incidentales o consecuentes, de manera que es posible que las
limitaciones o exclusiones que preceden no correspondan en su caso. Esta
garantía le otorga derechos legales especícos y es posible que usted también
tenga otros derechos que dieren entre un estado y otro.
Las garantías que preceden no cubren daños y perjuicios ocasionados
como resultado de mantenimiento, reparaciones, limpieza o instalación
inadecuados, mal uso, abuso, alteraciones, accidentes o causas de fuerza
mayor.
Pster™
Une garantie limitée à vie
pour ce qui est de l’aspect mécanique et de la nition,
tant et aussi longtemps que vous serez propriétaire
de votre domicile.
(Garantie limitée en cas d’utilisation commerciale
– voir ci-dessous)
Veuillez noter qu’une preuve d’achat peut être requise en cas de recours
au titre de la garantie.
Garantie limitée : Tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Pfister a été installé, nous lui
garantissons que ce dernier sera exempt de tout défaut de matériau ou
vice de fabrication pouvant en entraver l’utilisation correcte tel que prévu.
Dans le cas des produits d’utilisation commerciale, la garantie exprimée
ci-dessus est restreinte à une période de dix (10) ans.
Par ailleurs, tant et aussi longtemps que l’acheteur sera propriétaire du
domicile dans lequel le produit Pster a été installé, nous lui garantissons
un article dont la nition ne pourra se détériorer. Dans le cas des produits
d’utilisation commerciale qui ne comportent pas la nition “Pforever”,
la garantie est restreinte à une période de cinq (5) ans.
Recours exclusif : En cas de défaut du produit relevant de la garantie,
le fabricant pourra, à sa discrétion, réparer ou remplacer la partie
défectueuse. Cette mesure constitue un recours exclusif.
Pour tout recours au titre de la garantie, les clients doivent communiquer
avec le fabricant pour lui faire part du problème. L’acheteur d’origine
peut : (1) composer le 1 800 732-8238 pour parler à un représentant
qui l’assistera; (2) écrire au service à la clientèle : Pster Inc., 19701
DaVinci, Lake Forest, CA 92610 U.S.A., et fournir une explication du
problème, en précisant le numéro de modèle, son nom, son adresse et
son numéro de téléphone, ainsi que la date d’achat approximative; (3)
communiquer par courrier électronique avec le service à la clientèle en
utilisant le site www.psterfaucets.com, ou (4) aviser le détaillant qui a
vendu le produit. On peut être obligé de retourner le produit au fabricant,
et une preuve d’achat peut être exigée.
Limitations et exclusions :
PFISTER NE SERA PAS RESPONSABLE DES AUTRES DOMMAGES
OU PERTES, Y COMPRIS LES DOMMAGES
INDÉPENDAMMENT DE TOUTE THÉORIE
TOUTE RÉCLAMATION SELON LAQUELLE IL Y AURAIT EU
RUPTURE DE GARANTIE, QUE CE SOIT PAR RAPPORT À UN
CONTRAT OU PAR VOIE DE NÉGLIGENCE (cela comprend la
négligence et la responsabilité stricte).
Pster se réserve le droit de discontinuer ou de modier un produit en
tout temps. Certaines provinces ne permettent pas l’exclusion ou la
limitation des dommages indirects, de sorte que la limitation exprimée
peut ne pas s’appliquer. La présente garantie octroie aux clients certains
droits d’ordre juridique, et ceux-ci pourraient en avoir d’autres, selon la
province où ils habitent.
La garantie ne s’applique pas aux dommages résultant d’un entretien, d’un
nettoyage ou d’une installation fautivement effectués, ou encore d’usages
fautifs, d'abus, de modications, d'accidents ou de catastrophes naturelles.
INDIRECTS,
JURIDIQUE, Y COMPRIS
02-16-12 EO7914L
Copyright © 2012, Price Pster, Inc.
32004-0300
ENGLISH
Thank you for purchasing this Price Pster product. All Price Pster products are carefully engineered, and factory tested to provide long
trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions. If you
have any questions regarding your product installation call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding.
Price Pster recommends calling a professional if you are uncertain about
installing this product!
This product should be installed in accordance with all local and state plumbing
and building codes.
ENGLISH
WARNING: This product has been designed for use with the Price
Pster VX8 series pressure balancing valve. It will not work with any other
product.Please review the VX8 valve installation instructions before installing
this product.
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found near the water meter. If you are replacing an existing unit, remove
the old unit and clean the mounting surface thoroughly.
3
5
30”
Tub & Shower
INSTALLATION STEPS
1 1/4” Dia.
4 3/4” Dia.
4” Dia. for Thin
Wall Installation
48”
Shower Only
1 1/4” Dia.
48”
Tub & Shower
8” Min.
30”
Shower Only
3 TOOLS RECOMMENDED
• PTFE plumber's tape or thread sealant
• Philips head screwdriver • Adjustable wrench • Pipe wrench
• Flashlight • Cloth
Your installation will require a pipe nipple for the spout installation as well as
other additional tools.
4
P
N
F
Q
L
E
J
K
D
H
G
C
B
A
M
5 WORK AREA INSPECTION
Verify that the hole sizes and positions in the wall are correct.
6
6A
A
6B
B
6A
6C
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Gasket Flange B Trim Flange C Washer
D Retainer Sleeve E Stem Extension F Handle Hub
G Set Screw H Hex Wrench J Diverter Spout
K Shower Arm L Shower Head M Shower Flange
N Knob P Lever Q Screws
If any of these items are missing, please contact Price Pster Consumer
Service at 1-800-Pfaucet (1-800-732-8238).
6 PLASTERGUARD OPTIONS
A.
For installation using plasterguard, knock out Center Section (6B) from
Plasterguard (6A). The use of plasteguard is optional for standard installations.
B. For installation without plasterguard, remove Screws (6C), and Plasterguard
(6A).
2
7
ENGLISH
9
7A
7G
7D
7B
7E
7C
7C
7 TRIM FLANGE ATTACHMENT
Position Flange (7A) on Valve (7B) with Drain Hole (7C) at the bottom. Place
Protective Washer (7D) on the short end of the reversible Retainer Sleeve
(7E). Screw Retainer Sleeve (7E) onto threaded section of the Stem and
Bonnet (7G). Tighten Retainer Sleeve (7E) by hand until Flange (7A) is snug
to nished wall surface. If the short end of the Retainer Sleeve (7E) is too
short, reverse it to use the longer end.
9A
9 SHOWER ARM INSTALLATION
Insert the longer end of Shower Arm (9A) through the Shower Flange (9B) .
Apply PTFE plumber’s tape to both ends of Shower Arm (9A) according to
manufacturer’s instructions. Screw the end of Shower Arm (9A) into pipe elbow
inside the wall. Slide Shower Flange (9B) tight to the wall.
9B
ENGLISH
8
8D
8A
8C
8E
8F
8B
8G
8C
8H
8J
8 HANDLE ATTACHMENT
Screw Stem Extender (8A) onto the Valve Stem (8B). With valve in “CLOSED”
position, place Handle Hub (8C) onto Cartridge (8D) and secure with Screws
(8E). Place Knob (8F) into Handle Hub (8C) and tighten the Set Screw (8G)
by using the Hex Wrench (8H) that is provided. Hand tighten Decorative Lever
(8J) onto Handle Hub (8C).
10
10A
10B
10 SPOUT INSTALLATION
Apply PTFE plumbers tape on both ends of Pipe Nipple (10A) (not included).
Screw Pipe Nipple (10A) into the elbow inside the wall and tighten with pipe
wrench. The Pipe Nipple (10A) is to project 3 ⅞” to 4” from the nished wall.
Screw Tub Spout (10B) onto Pipe Nipple (10A) and tighten until Spout is pro perly
positioned and ush to the nished wall.
11 UNIT START UP
Turn on hot and cold water supplies, and check all connections for leaks.
3
7
/8”
”
3
to 4
12
ENGLISH
ENGLISH
15
15C
OPEN
12A
CLOSED
12 FLOW FUNCTION
By rotating the Lever Handle (12A) counterclockwise, the valve will be activated.
The water ow will increase by continuing to rotate the Lever Handle (12A).
13
FULL HOT
FULL COLD
13A
15B
15A
15 FINAL FLUSHING
For nal ushing, turn valve on and allow water to run through the Tub Spout
(15A) for several minutes. Pull Spout Knob (15B) up to allow water to run through
Shower Arm (15C). Allow water to run for several minutes until all foreign matter
clears the line.
16
16B
13 TEMPERATURE CONTROL
By rotating the Knob (13A) clockwise, the water temperature will decrease
to cold ow only. By rotating the Knob (13A) counter-clockwise, the water
temperature will increased to hot ow only.
14
14 TUB SPOUT FUNCTION
When the valve is turned on, water normally ows through the Tub Spout (14A).
To activate the shower, turn valve on and pull the Knob (14B) up. Hold on until
water ows continuously from the shower arm.
UP
For
Shower
14A
14B
16A
16 SHOWER HEAD INSTALLATION
Thread Shower Head (16A) onto Shower Arm (16B).
Make sure Shower Head (16A) is securely tightened to Shower Arm
(16B).
4
TROUBLE SHOOTING TIPS
ENGLISH
Water starts out hot and becomes cooler as handle is rotated counter
clockwise.
This is a potentially hazardous situation and should be corrected before using
G
the unit. Check the hot and cold inlet positions (hot- left cold-right). If you have
a back to back installation, (where hot and cold inlets are reversed) refer to
Valve Body instruction sheets for back to back installation.
ENGLISH
J
F
Water ows from the shower head while lling the tub.
E
Check the position of the Valve Body (J). The letters “SHWR” should be cast
into the top and “TUB” on the bottom.
C
Water doesn’t get hot enough.
A
D
Remove Handle (A), Sleeve (B) and Flange (C) and then refer to Valve Body
instruction sheets for adjusting temperature range.
H
B
Water ows from the tub spout while using the shower.
The seal inside of the diverter mechanism may have become dislodged. The
Spout (H) may need replacement.
Temperature or ow does not remain consistent.
The Car tridge Assembly (D) may need cleaning. Shut off water supply. Remove
Handle Assembly (A), unscrew Retainer Sleeve (B) and remove Flange (C) .
Remove Cartridge assembly (D) and inspect Cartridge (E) and inlets for debris
or sediment and ush with water. Reassemble whole unit and test. If problem
persists you may need to replace the Cartridge (E).
Sleeve (B) is too short.
Extension kit 910-563 is available at a nominal charge for valves which have
been roughed-in too far back in the wall. The kit contains a one inch stem
extension, and longer screw and a sleeve which is one inch longer than the
972-300.
Dripping from either the tub spout or shower head.
Clean the Cartridge Assembly (D). Check to ensure the two Oval O-Rings (F)
on the back of the Cartridge (E) are in place. Reassemble cartridge, stem and
bonnet assembly and handle. Turn on the water and test. If the unit still leaks,
replace the Cartridge (E).
MAINTENANCE & CARE
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pster Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
Make sure that both hot and cold water inlets are turned on.
Water ow is very low.
Check the Cartridge As sembly (D), for debris. Sediment where the water enters
the Shower Head (G) can also cause this symptom.
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepster.com
• Installation Support
• Care and Warranty Information
5
Loading...