Pfister GT529-MDS User Manual [en, es, fr]

529 Series

Serie 529 Série 529

Single Control Kitchen Faucet

Grifo Monomando Para La Cocina

Mitigeur De Cuisine

Lifetime Limited Mechanical & Pnish Warranty

Price Pster

Covers Pnish and Pfunction for as Long as You

Own Your Home

(Commercial Applications Limit the Duration of the

Warranties as Provided Below)

Price Pster provides the following Warranties for its products. Proof of Purchase may be required in order to obtain any of the benets set forth below.

Limited Warranties: Price Pster warrants that for as long as the original purchaser owns the home in which the Price Pster product (the “Product”) is originally installed, the Product will be free of all defects in material and workmanship that would impair the intended and proper use of the Product. If the Product is installed in a commercial application, the above mechanical warranty shall be limited for a period of ten (10) years from the date of purchase of the Product.

Price Pster warrants against deterioration of the Product’s nish for as long as the original purchaser owns the home in which the Product is originally installed. If the Product is installed in a commercial application, the above nish warranty for Products that do not contain the Pforever nish shall be limited to a period of ve (5) years from the date of purchase.

Exclusive Remedy: In the event of any defect in the Product that breaches the foregoing warranties, Price Pster, at its option, will repair or replace the defective part of the Product. Repair or replacement of the Product is the exclusive remedy.

For any remedy under this warranty, Price Pster is to be notied describing the problem. In order to notify Price Pster and receive assistance or service under this warranty, the original purchaser may: (1) call 1-800-Pfaucet (1-800-732-8238) for a consumer service representative who can assist you, or (2) write consumer service department c/o Price Pster Inc., 19701 DaVinci, Lake Forest, CA 92610, and include a description of the problem, model number, your name, address, phone number and approximate date of purchase, or (3) email Price Pster’s customer service department by going to www.PricePster.com, or (4) notify the location or distributor from which the Product was purchased. In any case, you may be required to return the Product to Price Pster for inspection and proof of purchase may be required.

Limitations and Exclusions: PRICE PFISTER WILL NOT BE LIABLE FOR ANY OTHER DAMAGES OR LOSSES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING ANY CLAIM OR BREACH OF WARRA NTY HEREUND ER OR ANY OTHER CAUSE, AND WHETHER ARISING IN CONTRACT OR IN TORT (including negligence and strict liability).

Price Pster has the right to discontinue or modify any product at any time. Some states do not allow limitations or exclusions of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.

The above warranties do not cover damage resulting from improper maintenance, repair, cleaning or installation, misuse, abuse, alterations, accidents or acts of God.

05-02-08 EO7267A

Garantía Mecánica y sobre el Acabado Limitada de por Vida

Price Pster

Cubre las funciones y el acabado por el tiempo en que usted sea

propietario de su casa

(Las Aplicaciones Comerciales Limitan la Duración

de las Garantías)

Price Pster suministra las siguientes Garantías para sus productos. Es posible que se requiera la presentación de una Prueba de compra para obtener cualquiera de los benecios indicados a continuación.

Garantías Limitadas: Price Pster garantiza que por el tiempo en que el comprador original sea propietario de la casa en el que se hubiese instalado inicialmente el producto Price Pster (el “Producto”), este Producto estará libre de todo defecto en material y mano de obra que pueda afectar el uso proyectado y correcto del Producto. Si el Producto se instala en una aplicación comercial, la garantía mecánica que antecede estará limitada a un período de diez (10) años a partir de la fecha de compra del Producto.

Price Pster garantiza el acabado del Producto contra deterioro por el tiempo en que el comprador original sea propietario de la casa en la que hubiese instalado inicialmente el Producto. Si el Producto se instala en una aplicación comercial, la garantía sobre el acabado que precede para Productos que no contengan el acabado “Pforever” estará limitada a un periodo de cinco (5) años a partir de la fecha de compra.

Recurso exclusivo: En el caso de que haya un defecto en el Producto que viole las garantías que preceden, Price Pster, a su opción, reparará o reemplazará la pieza defectuosa del Producto. La reparación o el reemplazo del Producto es el recurso exclusivo.

Para todo recurso con respecto a esta garantía, Price Pster deberá ser noticado, con una descripción del problema. Para noticar a Price Pster y recibir ayuda o servicio bajo esta garantía, el comprador original puede: (1) llamar al 1-800-Pfaucet (1-800-732-8238) para hablar con un representante de servicio al cliente que lo pueda ayudar, o (2) escribir al departamento de servicio al consumidor, c/o Price Pster Inc., 19701 DaVinci, Lake Forest, CA 92610 U.S.A., e incluir una descripción del problema, el número del modelo, su nombre, dirección, número de teléfono y fecha aproximada de compra, o (3) enviar un e-mail al departamento de servicio al consumidor de Price Pster entrando en la página web www.PricePster.com, o (4) avisarle al lugar o al distribuidor en donde se compró el Producto. En cualesquiera de los casos, podría pedírsele devolver el Producto a Price Pster para su inspección y es posible que se requiera la presentación de una prueba de compra.

Limitaciones y Exclusiones: PRICE PFISTER NO SE HARÁ RESPONSABLE DE NINGÚN OTRO DAÑO O PERJUICIO, INCLUYENDO, PERO SIN ESTAR LIMITADO A DAÑOS INCIDENTALES Y/O CONSECUENTES, SIN IMPORTAR LA TEORÍA LEGAL A LA QUE SE ALEGUE, INCLUYENDO TODO RECLAMO O VIOLACIÓN DE LA GARANTÍA PRESENTE O CUALQUIER OTRA CAUSA, Y YA SEAN COMO RESULTADO DE LA LEY CONTRACTUAL O LA DE ANTECEDENTES (incluyendo negligencia y responsabilidad estricta).

Price Pster tiene el derecho de discontinuar o modicar cualquier producto en cualquier momento. Ciertos estados no permiten limitaciones o exclusiones de daños incidentales o consecuentes, de manera que es posible que las limitaciones o exclusiones que preceden no correspondan en su caso. Esta garantía le otorga derechos legales especícos y es posible que usted también tenga otros derechos que dieren entre un estado y otro.

Las garantías que preceden no cubren daños y perjuicios ocasionados como resultado de mantenimiento, reparaciones, limpieza o instalación inadecuados, mal uso, abuso, alteraciones, accidentes o causas de fuerza mayor.

Price Pster

Une garantie limitée à vie

pour ce qui est de l’aspect mécanique et de la nition,

tant et aussi longtemps que vous serez propriétaire

de votre domicile.

(Garantie limitée en cas d’utilisation commerciale

– voir ci-dessous)

Veuillez noter qu’une preuve d’achat peut être requise en cas de recours au titre de la garantie.

Garantie limitée : Tant et aussi longtemps que l’acheteur sera propriétaire du domicile dans lequel le produit Price Pster a été installé, nous lui garantissons que ce dernier sera exempt de tout défaut de matériau ou vice de fabrication pouvant en entraver l’utilisation correcte tel que prévu. Dans le cas des produits d’utilisation commerciale, la garantie exprimée ci-dessus est restreinte à une période de dix (10) ans.

Par ailleurs, tant et aussi longtemps que l’acheteur sera propriétaire du domicile dans lequel le produit Price Pster a été installé, nous lui garantissons un article dont la nition ne pourra se détériorer. Dans le cas des produits d’utilisation commerciale qui ne comportent pas la nition “Pforever”, la garantie est restreinte à une période de cinq (5) ans.

Recours exclusif : En cas de défaut du produit relevant de la garantie, le fabricant pourra, à sa discrétion, réparer ou remplacer la partie défectueuse. Cette mesure constitue un recours exclusif.

Pour tout recours au titre de la garantie, les clients doivent communiquer avec le fabricant pour lui faire part du problème. L’acheteur d’origine peut : (1) composer le 1 800 732-8238 pour parler à un représentant qui l’assistera; (2) écrire au service à la clientèle : Price Pster Inc., 19701 DaVinci, Lake Forest, CA 92610 U.S.A., et fournir une explication du problème, en précisant le numéro de modèle, son nom, son adresse et son numéro de téléphone, ainsi que la date d’achat approximative; (3) communiquer par courrier électronique avec le service à la clientèle en utilisant le site www.PricePster.com, ou (4) aviser le détaillant qui a vendu le produit. On peut être obligé de retourner le produit au fabricant, et une preuve d’achat peut être exigée.

Limitations et exclusions : PRICE PFISTER NE SERA PAS RESPONSABLE DES AUTRES DOMMAGES OU PERTES, Y COMPRIS LES DOMMAG ES IN DIREC TS, IN DÉPEN DAMME NT DE TO UTE THÉO RIE JURID IQUE, Y COMPRIS TOUTE RÉCLAM ATIO N SELON LAQUELLE IL Y AURAIT EU RUPTURE DE GARANTIE, QUE CE SOIT PAR RAPPORT À UN CONTRAT OU PAR VOIE DE NÉGLIGENCE (cela comprend la négligence et la responsabilité stricte).

Price Pster se réserve le droit de discontinuer ou de modier un produit en tout temps. Certaines provinces ne permettent pas l’exclusion ou la limitation des dommages indirects, de sorte que la limitation exprimée peut ne pas s’appliquer. La présente garantie octroie aux clients certains droits d’ordre juridique, et ceux-ci pourraient en avoir d’autres, selon la province où ils habitent.

La garantie ne s’applique pas aux dommages résultant d’un entretien, d’un nettoyage ou d’une installation fautivement effectués, ou encore d’usages fautifs, d'abus, de modications, d'accidents ou de catastrophes naturelles.

33721-0100

A COMPANY

ENGLISH

Thank you for purchasing this Price Pster product. All Price Pster products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pster

recommends calling a professional if you are uncertain about installing this product! This product should be installed in accordance with all local and state plumbing and building codes.

ENGLISH

2 SHUT OFF WATER SUPPLY

Lo ca te w at er s upp ly inl et s an d s hut of f th e w ate r su pp ly v al ves . T hes e a re u su all y fo un d under the sink or near the water meter. If you are replacing an existing faucet, remove the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• Plumber's putty • Philips head screwdriver • Pliers

• Adjustable wrench • Flashlight • Cloth

Your installation may require new supply lines and / or shut-off valves or other additional tools.

These instructions cover two different

installations

Option 1:

4 Hole With Deckplate

Installation

Go To

Step 6

2 Hole With Single Post

Option 2:

Installation

Go To

Step 8

4 HOLE INSTALLATION

BOTTOM GROOVE

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included:

A Faucet Body B Spray Head C Pull-Out Hose D Soap Dispenser E G Putty Plate H Wing Nuts (2x) J Metal Washer K Locknut L Weight M Quick Connector N Mounting Ring P Putty Ring

If any of these items are missing, please contact Price Pster Consumer Services at 1-800-Pfaucet (1-800-732-8238).

Soap Dispenser Head

Deckplate

6 INSTALLING DECKPLATE

Ensure that Plastic Putty Plate (6A) is pressed on to Deckplate (6B). Place a bead of plumber’s putty in the bottom groove along the outer edge of the Putty Plate ( Install Deckplate (

) over the three holes in your sink.

7 SECURING DECKPLATE

From underneath sink, hand tighten Wing Nuts (7A). Caution: do not over-tighten wing nuts. Remove any excess putty from around the outside edge of Putty Plate (

STOP

Go To Step 9

2 HOLE INSTALLATION

ENGLISH

10F

10E

8 INSTALLING MOUNTING RING

Place Mounting Ring (8A) over Plastic Seal (8B) and sink hole. Align Mounting Ring (8A) to the center of sink hole. Place a bead of plumber’s putty in the bottom groove along the outer edge of Plastic Ring (8B).

10C

10D

10A

10B

10 SECURING SPOUT BODY

From underneath sink, place Washer (10A) and Locknut (10B) over Pull-Out Hose (10C) and Supply Tubes (10D). Thread loosely onto Mounting Shank (10 E ). Make sure that Handle (10F ) is properly aligned to sink. Tighten faucet rmly to sink.

9 BODY INSTALLATION

Retract Pull-Out Hose (9A) up through Faucet Body (9B), until the pullout hose tting

is ush with the bottom of Mounting Shank (

Receiving Tube ( (9H) can be oriented to the right or the left.

Note: Do not feed the Pull-Out Hose (9A) back down through the spout yet.

) through the hole in Deckplate (9F) or Mounting Ring (9G). Handle

). Insert Faucet Supply Tubes (9D) and

11C

11B

11A

11 QUICK CONNECT & WEIGHT ATTACHMENT

In se rt t he end of t he Pul l- Ou t Ho se (11A) int o t he W eig ht (11B ). Screw Quick Connector (11C) to the free end of Pull-Out Hose (11A).

ENGLISH

12 14

ENGLISH

12C

12D

12C

12A

14C

14B

14A

12A

12B

12 PULL-OUT HOSE ATTACHMENT

From underneath sink, push Quick Connector (12A), located on the end of the Pull-Out Hose (12B) rmly upward onto the Receiving Tube (12C), until unable to push any further. Pull down on the Quick Connector (12A). If the housing and the Inner Collet (12D) separate slightly but do not pull off the Receiving Tube (12C), quick connect is secure.

12A

13A

13B

14 SOAP DISPENSER HEAD INSTALLATION

Pour liquid soap (not included) into the Soap Dispenser Body (14A). Insert Pump Mechanism (14B) into Soap Dispenser Body (14A). Install Dispenser Head (14C) by pushing rmly onto Pump Mechanism (14B).

15C

15B

15A

HOT

15 WATER SUPPLY CONNECTIONS

Gently separate hot and cold Faucet Inlets (15B), approximately three inches apart. Connect water Supply Lines (15A) to Faucet Inlets (15B). Hot water supply line goes to hot inlet tting indicated by red tag (15C). (Supply lines not included). Follow

manufacturer’s instructions when installing supply lines.

COLD

13C

13D

13 SOAP DISPENSER INSTALLATION

From above sink, insert threaded Shank (13A) of soap dispenser body through Foam

Gasket (13B ) and sink hole. From below sink, tighten Nut (13C ) and thread on Soap Bottle (13D ) to Shank (13A).

16B

16A

16 SECURING INLET LINES

Do not cross Pull-Out Hose Connection (16A) with Inlet Supply Tubes (16B) to avoid binding, jamming and interference with the movement of the Pull-Out Hose (16A).

17 UNIT START UP

Turn on hot and cold water supplies, and check for leaks above and below the sink.

FAUCET FUNCTIONS

ENGLISH

20A

20 PULL-OUT OPERATION

The Pull-Out Hose (20A) can be pulled forward to spray water in any direction.

21A

18A

18 SPOUT FUNCTION

The Spout (18A) can be rotated around the Faucet Body in any direction.

19B

COLD

HOT

21B

21C

21 SPRAY OPERATION

By activating the valve, water will ow in regular stream mode. To activate the spray mode, press Button (21A) located behind Spray Head (21C). By pressing Button (21B), the spray pattern will change between spray and stream while the faucet is in operation. By holding Button (21B), the water ow will pause. The water ow will resume once Button (21B) is released.

22B

22A

22 SOAP DISPENSER OPERATION

To activate Soap Dispenser (22A), press Dispenser Head (22B) to spray liquid soap.

MAINTENANCE & CARE

19A

19 VALVE FUNCTION

By rotating the Lever Handle (19A) away from the Faucet Body (19B), the valve will be activated allowing water to ow. The water ow will increase by continuing to rotate the

Lever Handle (19A). By rotating the Lever Handle towards you, the water temperature

will decrease to cold ow only. By rotating the Lever Handle away from you, the water temperature will increased to hot ow only.

Note: Flush faucet before turning on valve (see step 24).

23B

23A

23 SPRAY HEAD REMOVAL

To prevent damage to the internal parts of your faucet from debris that may have collected

in the water lines, it will be necessary to ush the faucet. Flushing requires the removal

of the sSpray Head (23A). To remove the Spray Head (23A), hold metal Hose Fitting (23B) and turn the Spray Head (23A) counterclockwise.

24B

ENGLISH

24C

24A

ENGLISH

2724

27A

27D

27C

24 FLUSHING

Turn on Valve Lever Handle (24A). Run water for one minute. Repeat in hot and cold positions. Reassemble the Spray Head (24B) to the Pull-Out Hose (24C) by turning Spray Head (24B ) clockwise.

Caution: Do not over tighten Spray hHead and Pull-Out Hose.

25B

25C

25D

25A

25 AERATOR CLEANING

Over time, the aerator in your faucet may become clogged with debris. To clean the aerator, unscrew Aerator Housing (25A) from Spray Head (25B). Remove Aerator Seal (25C) a nd A er ato r C ar tr idg e (25D) fr om A er ato r H ous in g (25A) . Cl ean Ae rat or Car tr id ge (25D) and Aerator Housing (25A). Reassemble faucet by reversing steps.

26B

26C

27E

27B

27 CARTRIDGE REPLACEMENT

Turn off water supplies and relieve pressure before working on your faucet.

Using a

/32” Hex wrench, loosen Set Screw (27A) and remove Handle (27B).

Do me Ca p (27C) by uns cr ew in g co un te rc loc k wis e. Un scr ew Re tai ne r R in g (27D) and carefully remove Cartridge (27E ) by pulling it straight up and out.

Reassemble faucet by reversing steps.

Remove

CAUTION: Maintenance

DISASSEMBLY

1. Replacement parts may be available at the store where you purchased your faucet.

2. When replacement parts are not available, please write or call Price

Pster Consumer Service.

3. Always turn off water and relieve pressure before working on your faucet.

NOTE: Trim Care

Cleaning Instructions:

For all Handles and decorative nishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage. Use of

other than a soft damp cloth will nullify our warranty! Special Trim:

Trim products which contain Porcelain or other similar substance are not acceptable for public areas or Commercial use. Installation of Said Trim is at Users Risk!

26A

26 PULL-OUT HOSE REMOVAL

To remove the quick connect attachment: Push up on Quick Connector (26A). Holding gray Plastic Collet (26B) in place, pull downward on Quick Connector (26A) until Tube

(26C) is free.

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call 1–800–PFAUCET (1–800–732–8238) or visit www.pricepster.com

• Installation Support

• Care and Warranty Information

+ 12 hidden pages