Visual signaling devices
ELECTRO-TECHNOLOGY FOR INDUSTRY
LED multifunction light
Quadro-LED Flex
• designed for tough requirements under industrial conditions
• suitable for indoor and outdoor use
• extremely insensitive to shock and vibration
• internally and externally selectable operating mode as standard - one
device for 4 different alarms:
– continuous light
– blinking light
– ashing light
– rotating light (non-wearing)
• 24 V AC/DC devices as standard with soft-start module
• can be operated directly via 24 V transistor PLC output,
no additional relay control necessary
• inexpensive and exible; wide range power supplies as standard
r =
5 m
Range as
per EN 54
IP 66
Protection
system
IP 67
Protection
system
IK 08
Impact-proof
housing
Electrical data Quadro-LED Flex
Rated voltage 115 / 230 V AC/DC 24 V AC/DC
Rated frequency 50 Hz / 60 Hz / DC 50 Hz / 60 Hz / DC
Operating range
Current consumption in
continuous light mode
AC 95 V – 253 V 15 V – 40 V
DC 100 V – 350 V 10 V – 60 V
AC 115 V: < 90 mA 230 V: 60 mA 24 V: 420 mA
DC 120 V: < 55 mA 220 V: 35 mA 24 V: 250 mA
Mechanical data Quadro-LED Flex
Operating mode (internally and
externally selectable)
Light alternation frequency 1.5 Hz 1 Hz 2.5 Hz
Light source LED; 8 x 2 LEDs (3 chip version)
Light intensity (DIN 5037) clear lens 9 cd
Lens colours clear, white, yellow, amber, red, green, blue
Operating temperature - 30 °C ... + 55 °C
Storage temperature - 40 °C ... + 70 °C
Relative humidity 100%
Protection system according to EN 60529 IP 66, IP 67, mounting arbitrary
Impact resistance as per EN 50102 IK 08
Protection class II
Service life of light source ≥ 50.000 hrs
Material
Cable entry 2 x M20/M32 sideways, 2 x M20 bottom side
Connecting terminals spring-type terminal 0.08 – 2.5 mm
Weight 500 g
lens polycarbonate (PC)
housing polycarbonate (PC), grey RAL 7035
continuous light blinking light ashing light rotating all-round light
Operating modes
S1
1 2 3
OFF OFF OFF OFF
OFF OFF ON all-round light 2.5 Hz
OFF ON OFF continuous light
OFF ON ON blinking light 1.5 Hz
ON OFF OFF ashing light 1 Hz
ON OFF ON all-round light 2.5 Hz
ON ON OFF continuous light
ON ON ON blinking light 1.5 Hz
Selection via
internal DIP switch
S1 - X1 -
1 1 2 3 4
(S1-2 = OFF, S1-3 = OFF)
OFF -/N +/L OFF (standby)
OFF -/N +/L +/L all-round light 2.5 Hz
OFF -/N +/L +/L continuous light
OFF -/N +/L +/L +/L blinking light 1.5 Hz
ON -/N +/L ashing light 1 Hz
ON -/N +/L +/L all-round light 2.5 Hz
ON -/N +/L +/L continuous light
ON -/N +/L +/L +/L blinking light 1.5 Hz
+ 55 °C
- 30 °C
Operating
temperature
Selection via
external control
2
S1 - X1 -
1 1 2 3 4
(S1-2 = OFF, S1-3 = OFF)
OFF -/N +/L all-round light 2.5 Hz
OFF -/N +/L continuous light
OFF -/N +/L +/L blinking light 1.5 Hz
ON -/N +/L ashing light 1 Hz
ON -/N +/L all-round light 2.5 Hz
ON -/N +/L continuous light
ON -/N +/L +/L blinking light 1.5 Hz
Selection via BAV option
(24 V AC/DC only)
Dimensions
80
130
25
47
mounting screw
e.g. M4 x 20
Additional mounting possible via external lugs (included).
disruption prepared
M20/M32
39
130
113
37
113
mounting
holes
Ordering details
Article numbers Quadro-LED Flex
Lens colour Rated voltage 230 V AC/DC 24 V AC/DC
yellow 211 04 64 3 000 211 04 63 3 000
amber 211 04 64 4 000 211 04 63 4 000
red 211 04 64 5 000 211 04 63 5 000
Article numbers for other colours on request
Options / accessories
GOST
Conformity to standards
The visual characteristics of LED lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.
Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fullled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
‘Coding of display devices and control elements using colours and supplementary means’.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
disruption
prepared
M20
LED Lights
78 79
Loading...