Pfannenberg PY X-M-05 Catalog Page

PRODUCTS VISUAL SIGNALING DEVICES

PYRA FLASHING LIGHT 5 J
PY X-M-05

• Safe – an incorrect installation is virtually impossible.

• Easy – significantly shorter assembly and installation times.

• Economical – largest possible signaling range due to effective Xenon
technology.

• Installation options with external lugs or internal holes.

• Choice of 4 different flash rates via DIP switch.

• Suitable for panel mounting.

• Electronic constant current regulation at 24 V AC/DC devices to avoid load
fluctuations.

• Integrated inrush current limitation and undervoltage detection (option).

• Providing full synchronisation on multi-flashing light systems.

IP 66

protection
system

IK08

impact-proof
housing

+55 °C

–40 °C

operating
temperature

EN

54-23

VdS

10

Years

warrantySSM version SSM version

PRODUCT PY X-M-05

DATA

Rated voltage

Operating range

Nominal current consumption @ 1 Hz

Flash rate

Flash energy

Light intensity (DIN 5037)

Max. viewing distance

Operating temperature

Storage temperature

Relative humidity

Protection system (EN 60529)

Protection class

Duty cycle

Service life of the light source

Material

Housing colour

Cable entry

Integrated seal with cable entr y

Connecting terminal

Weight

1

with a clear lens

1

lens

housing

230 V 115 V 12 / 24 / 48 V DC / 24 V AC

AC 50 | 60 Hz AC 50 | 60 Hz AC 50 | 60 Hz / DC

187–255 V 90 –135 V

60 mA 110 mA

0.1 / 0.5 / 0.75 / 1 Hz (DIP switch)
5 J

56 cd

173 m
–40 °C ... +55 °C
–40 °C ... +70 °C

max. 90 %

IP 66

II

100 %

light emission still 70 % after 8,000,000 flashes

polycarbonate (PC)

PC / ABS

RAL3000 (flame red) / RAL 7035 (light grey) / RAL 9003 (signal white)

2x M20 sideways, 2x M20 bottom side

6–13 mm

2.5 mm2 fine wire, AWG 16

400 g 400 g 420 g

AC: 18–30 V
DC: 10–57 V

AC: 600 mA

DC: 280 mA @ 24 V

OPTIONS/ACCESSORIES

Surface

gasket

Tamper-

proof

sealing

Panel

mounting

kit

I

lim

t

DIMENSIONS

124

47

166

154

CONNECTION DIAGRAM

operating voltage connection

ARTICLE NO.

HOUSING COLOUR LENS COLOUR

Article numbers for other colours and voltages on request.

114

M20 prepared

7

Ø 7

M20 prepared

86

154

EN 54-23

PY X-M-05 PY X-M-05 SSM

230 V AC 115 V AC 12/24/48 V DC/ 24 V AC 24 V DC

21550101000 21550151000 21550811000 21550801005

21550103000 21550153000 21550813000 –

21550105000 21550155000 21550815000 21550805005

21550101055 21550151055 21550811055 21550801061

21550103055 21550153055 21550813055 –

21550105055 21550155055 21550815055 21550805061

Ø 7

CONFORMITY TO STANDARDS

The visual characteristics of flashing lights conform to the European standard DIN EN 842; “Machine safety – visual alarm signals”.
Requirements contained in the DIN EN 981 standard; “Machine safety – system of acoustic and visual alarm and information signals”, can be fulfilled.
The colours “red” for the emergency signal and “yellow” for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199; “Coding of

display devices and control elements using colours and supplementary means”.

References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV

SIGNALING TECHNOLOGY