Pfannenberg PMF 2015, PMF 2030 Catalog Page

PRODUCTS VISUAL SIGNALING DEVICES

PMF Flashing Lights

Powerful 360° omnidirectional signalling

for large distances (indoor and outdoor).

Robust, solid-state design

Xenon flash tubes are secured by a mechanical clamp and unlike rotating lights with motorised elements there is no risk of failure due to moving parts.

Up to 30 Joule flash energy

High energy impulse creates an intense light flash for effective signal coverage in large areas.

Highly effective light beam

Fresnel lens optics provide a brilliant horizontal light stream for long distance signal transmission.

Exceptional performance

withstands extreme temperatures and is safeguarded against potential voltage fluctuations.

Very good perceptibility

over great distances; low power consumption.

Versatile mounting

choose direct mount for flat surface installation or bracket mount for attaching to walls or pipes.

SIL

X M

xenon monitored

FLASHING LIGHTS

IP 55

protection system

PRODUCT

ARTICLE NO.

DATA

Light source xenon flash tube: quad, double flash xenon flash tube

Operating range

Nominal current consumption

Flash energy and flash rate 7 J @ 1 Hz = 60 flashes/min

Light intensity (DIN 5037)

Max. viewing distance 366 m 898 m

Operating temperature –40 … +55 °C

Protection system according to EN 60529

Service life of light source light emission still 70 % after 8,000,000 flashes

Material

Dimensions (X x Y + Y2) 177 x 185 + 0 mm 130 x 170.5 + 90 mm 177 x 185 + 0 mm 130 x 170.5 + 90 mm

+55 °C

–40 °C

operating temperature

PMF 2015 PMF 2030

direct mounting bracket mounting direct mounting bracket mounting

230 V

24 V

230 V

24 V

2 flashes 0.08 A 0.65 A

lens

housing

21007104000 21007104010 21010104000 21010104010

21007804000 21007804010

21007105000 21007105010 21010105000 21010105010

21007805000 21007805010

195–253 V 18–30 V 195–253 V

AC 50 | 60 Hz DC AC 50 | 60 Hz

250 cd 1,500 cd

acrylonitrile butadiene

styrene (ABS)

polycarbonate (PC)

450 mA @ 230 V

max. 30 J @ 1 Hz = 60 flashes/min

switchable to 20 J

IP 55 (vertical mounting)

polycarbonate (PC), fresnel characteristic

acrylonitrile butadiene

styrene (ABS)

polycarbonate (PC)

VISUAL SIGNALING DEVICES

1 with a clear lens

Several versions to serve specific needs

PMF 2015 PMF 2030 PMF 2015-SIL

High visibility, low power

High visibility, low

power flashing light.

34 35

PFANNENBERG.COM PFANNENBERG.COM

Extreme high vis-

ibility, low power

flashing light.

flashing light, conform-

ing to SIL 2 / PLd safety

integrity level. Includes

self-monitoring function.

High visibility, low power flashing light with self-monitoring function.

Additional contact closure included to alert operators of potential fail-

ure in the ability to generate a flashing light output. The light carries

type approval from the Swiss Ministry of Transport. An independent

technical safety report within the definitions of EN 50129 exists.

PMF 2015-M

bracket mounting

Webcode

#3113

PRODUCTS VISUAL SIGNALING DEVICES

FLASHING LIGHTS

IP 55

protection system

+55 °C

–30 °C

operating temperature

PMF 2015-SIL PMF 2015-M

PRODUCT

direct mounting bracket mounting bracket mounting

ARTICLE NO.

DATA

Light source xenon flash tube xenon flash tube: double flash

Operating range

Nominal current consumption

Alarm contact

Flash energy and flash rate 10 J @ 1 Hz = 60 flashes/min 7 J @ 1 Hz = 60 flashes/min

Light intensity (DIN 5037)

Max. viewing distance 348 m 366 m

Operating temperature –30 … +55 °C

Protection system according to EN 60529

Service life of light source light emission still 70 % after 8,000,000 flashes

Material

Dimensions (X x Y + Y2) 177 x 185 + 0 mm 130 x 170.5 + 90 mm 130 x 170.5 + 90 mm

For additional models, options and voltages visit www.pfannenberg.com or contact us directly.

1 with a clear lens

diagnostic channel 0.08 A 0.65 A

230 V

24 V

230 V

24 V

flashing light 250 mA 700 mA 0.65 A

monitoring unit 0.05 A

version positively driven contact (1x NC, 1x NO)

max. switching

power

lens

housing

21007104601 21007104611

21007804601 21007804611 21007804012

21007105601 21007105611

21007805601 21007805611 21007805012

195–253 V 18–30 V

AC 50 | 60 Hz DC

1,500 VA AC

225 cd 250 cd

IP 55 (vertical mounting)

polycarbonate (PC), fresnel characteristic

acrylonitrile butadiene

styrene (ABS)

polycarbonate (PC) polycarbonate (PC)

3D-Coverage performance data, A x B x C

PMF 2015

Indicate 54 x 171.9 x 171.9 m

Warn 24 x 76.4 x 76.4 m

Alarm 12 x 38.2 x 38.2 m

PMF 2015-M

Indicate 54 x 171.9 x 171.9 m

Warn 24 x 76.4 x 76.4 m

Alarm 12 x 38.2 x 38.2 m

PMF 2015-SIL

Indicate 52.2 x 173.7 x 173.7 m

Warn 23.2 x 77.2 x 77.2 m

Alarm 11.6 x 38.6 x 38.6 m

PMF 2030

Indicate 144 x 450 x 450 m

Warn 64 x 200 x 200 m

Alarm 32 x 100 x 100 m

Coverage area according to the applications „Indicate“, „Warn“ and „Alarm“ (EN 54-23) with clear lens. To determine the exact signaling area for your needs, please use the online available Pfannenberg Sizing Software PSS.

Models with alternative features available upon request

PMF PMF 2020 PMF-LED Flex

VISUAL SIGNALING DEVICES

The brightest LED technology with multi-function capa-

Alternate operating voltages, such as

115 V AC. Choice of lens colours: clear |

amber | red | green | blue.

Webcode

#3114

36 37

PFANNENBERG.COM PFANNENBERG.COM

Comprehensive technical documentation such as

• operating instructions, technical data, approvals

• support for planning, 3D models, CAD data

can be retrieved by entering this webcode in the search window on www.pfannenberg.com

Shock and vibration tolerant designs

with GL approval. Also suitable for

cranes and floor conveyor applications.

bility. Externally controllable operation with continuous,

blinking, flashing and rotating beacon modes. No moving

parts for utmost reliability.

See page 50.