Visual signaling devices
ELECTRO-TECHNOLOGY FOR INDUSTRY
LED continuous lights
PD 2100-M-AS-i / PD 2100-LED-M
Machine lights in an elegant pyramid design, equipped with LED light
source for extremely long service life (> 50,000 hrs)
• vibration/shock-resistant
• low power consumption (direct via AS-i-Bus)
• minimised maintenance costs
• uncompromising safety
• reliable monitoring circuitry and AS interface integrated in the light
• integrated function monitoring with potential-free fault contact
• for safety-relevant applications, such as X-ray and laser equipment
Additional for AS-i-Bus light:
• supplying of the light directly by bus system
M-AS-i LED-M
r =
4 m
Range as
per EN 54
IP 55
Protection
system
+ 45 °C
- 25 °C
Operating
temperature
+ 55 °C
- 25 °C
Operating
temperature
Electrical data PD 2100-M-AS-i PD 2100-LED-M
Rated voltage 28 V 230 V AC 24 V DC
Nominal current consumption ca. 250 mA 12 mA 65 mA
Rated frequency 50 Hz / 60 Hz
Operating range 26.5 V – 32.6 V ± 10% 21 V – 29 V
Alarm output via AS-i Bus 230 V / 80 mA (MOS relay, R
Mechanical data PD 2100-M-AS-i PD 2100-LED-M
Operating mode continuous light
Light source LED
Light intensity (DIN 5037) clear lens 5 cd
Lens colours clear, white, yellow, amber, red, green, blue
Operating temperature - 25 °C ... + 45 °C - 25 °C ... + 55 °C
Storage temperature - 40 °C ... + 70 °C
Relative humidity 90%
Protection system according to EN 60529 IP 55 (if mounted vertically/horizontally)
Protection class II
Duty cycle 100%
Service life of light source > 50.000 h
lens polycarbonate (PC)
Material
Cable entry M20 x 1.5, either at the side or underneath
Connecting terminals ne wire 0.14 – 2.5 mm
Type of connection
Addressing socket DC jack, Ø 1.3 mm
AS-i specication AS-i 2.1, A/B capable EN 50295
Weight 300 g AC: 380 g / DC: 270 g
housing ABS, light grey, similar to RAL 7035
baseplate ABS, light grey, similar to RAL 7035
Pin 1 AS-i +
Pin 2 NC
Pin 3 AS-i –
Pin 4 NC
• control and function monitoring directly via AS interface
M12 plug connector, 4-pole
AS-i +
AS-i –
= 35 Ω) (NC)
ON max.
2
Dimensions
PD 2100-M-AS-i PD 2100-LED-M
79
128
7
2.5
M12
11
111.2
166.2
166.2
Mounting holes
PD 2100-M-AS-i PD 2100-LED-M
-0.5
125 ±0.1
M20
Ø max. 6.2
Ø max. 6.2
Ø max. 6.4
24
125
Ø 24
Ø max. 6.4
Ø max. 6.2
85
28
Ø max. 6.4
28
85 ±0.1
Ordering details
Article numbers PD 2100-M-AS-i PD 2100-LED-M
Lens colour Rated voltage 26.5 V – 32.6 V 230 V AC 24 V DC
white 211 20 50 2 004
yellow 211 20 61 3 005 211 20 60 3 005
amber 211 20 61 4 005 211 20 60 4 005
red 211 20 50 5 004 211 20 61 5 005 211 20 60 5 005
Article numbers for other colours on request
Options / accessories
See page 121 for further information
Article number:
287 10 50 0 040
GOST
Conformity to standards
The visual characteristics of continuous lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.
Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fullled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
‘Coding of display devices and control elements using colours and supplementary means’.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
128
Lights
49
Function-monitored
114 115