Page 1
Visual signaling devices
ELECTRO-TECHNOLOGY FOR INDUSTRY
SPECTRA series ashing lights 15 Joules
P 400 STR / P 400 STS (Ø 140 mm)
• powerful ashing alarm light for universal use
• large variety of mounting methods due to modular design principle:
– surface-mounted devices for mounting directly or on a wall bracket
or a tubular stand
– also for exposed installation locations through combination of wall
bracket and tubular stand
– cable entry at the side (2 x) or through the base of the housing
• durable, sturdy and functionally reliable due to the use of
high-quality plastic
• optimum illumination due to prismatic coloured lens
• electronic components mechanically protected for highest
mounting security
• attracts maximum attention due to adjustable ash rates
r =
20 m
Range as
per EN 54
IP 65
Protection
system
+ 50 °C
- 25 °C
Operating
temperature
Electrical data P 400 STR P 400 STS
Rated voltage 230 V AC 115 V AC 24 V AC/DC 230 V AC 115 V AC 24 V AC/DC
Rated frequency 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz / DC 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz / DC
Operating range 207 V – 253 V 100 V – 130 V 20 V – 28 V 207 V – 253 V 100 V – 130 V 20 V – 28 V
Nominal current consumption 225 mA 400 mA 870 mA 225 mA 400 mA 870 mA
• also available in a synchronised version (STS)
Dimensions
220
20
Ø 140
cable entry
2 x M20
58
cable entry
Ø 5-7 mm
25°
120°
mounting holes
3 x Ø 5.4 mm
Flashing Lights
Ø 110
47
85°
120°
Mechanical data P 400 STR P 400 STS
Operating mode 3 ashing modes selectable on the device synchronised ashing light
Light source xenon ash tube xenon ash tube
mode 1 double ash 15 J + 10 J @ 0.75 Hz 15 Joules @ 1 Hz
Flash energy
Light intensity (DIN 5037) clear lens 165 cd
Lens colours clear, yellow, amber, red, green, blue
Lens type prismatic
Operating temperature - 25 °C ... + 50 °C
Relative humidity 90% @ + 20 °C
Protection system according to EN 60529 IP 65
Service life of the ash tube light emission still 70% after 5,000,000 ashes
Material polycarbonate (PC)
Design bayonet with anti-tamper locking screw
Mounting surface mounting (wall bracket and tubular stand available as accessories)
Cable entry 1 x 5-7 mm push through grommet (bottom side); 2 x M20 cable entries (sideways)
Connecting terminals screw terminals 1.5 mm
Weight
mode 2 single ash 15J @ 1 Hz
mode 3 triple ash 15 J + 10 J + 10 J @ 0.5 Hz
2
AC version 632 g
DC version 696 g
Ordering details
Article numbers P 400 STR P 400 STS
Lens colour Rated voltage 230 V AC 115 V AC 24 V AC/DC 230 V AC 115 V AC 24 V AC/DC
yellow 213 44 10 3 000 213 44 15 3 000 213 44 40 3 000 213 45 10 3 000 213 45 15 3 000 213 45 40 3 000
amber 213 44 10 4 000 213 44 15 4 000 213 44 40 4 000 213 45 10 4 000 213 45 15 4 000 213 45 40 4 000
red 213 44 10 5 000 213 44 15 5 000 213 44 40 5 000 213 45 10 5 000 213 45 15 5 000 213 45 40 5 000
Article numbers for other colours and voltages on request
Options / accessories
Wall
bracket
Article number:
213 94 00 0 000
Tubular
stand
145 mm
Article number:
213 95 00 0 000
only in
Wall
holder
Article number:
282 50 20 0 000
combination
with tubular
stand
See pages 120/121 for further information
Conformity to standards
The visual characteristics of ashing lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.
Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fullled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
‘Coding of display devices and control elements using colours and supplementary means’.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54
DIN 54113-2
R
F
ire alarm systems
adiation protection regulations for the technical operation of X-ray equipment up to 500 kV
42 43
Loading...