Pfannenberg P 400 SLF, P 400 SLH Catalog Page

Visual signaling devices

SPECTRA Series status lights

P 400 SLF / P 400 SLH (Ø 140 mm)

•powerful status lights for universal use

•optionally with halogen lamp or filament lamp

•large variety of mounting methods due to modular design principle:

–surface-mounted devices for mounting directly or on a wall bracket or a tubular stand

–also for exposed installation locations through combination of wall bracket and tubular stand

–cable entry at the side or through the base of the housing

•durable, sturdy and functionally reliable due to the use of

high-quality plastic

• optimum illumination due to prismatic coloured lens

P 400 SLF		P 400 SLH
r =		r =		IP 65			+ 50 °C
16 m		18 m					- 25 °C
Range as		Range as		Protection			Operating
per EN 54		per EN 54		system			temperature
Electrical data								P 400 SLF	P 400 SLH
Rated voltage								12 – 250 V *	12 – 250 V *
Power consumption								40 W	12V/24V: 35 W / 115V/230V: 40W
* Light source not included

Mechanical data	P 400 SLF		P 400 SLH
Operating mode	continuous light		halogen continuous light
Light source	filament lamp E14		halogen lamp G6.35 / GY6.35
Light power	40 W		35 / 40 W
Lens colours		clear, yellow, amber, red, green, blue
Lens type		prismatic
Operating temperature		- 25 °C ... + 50 °C
Relative humidity		90% @ + 20 °C
Protection system according to EN 60529		IP 65
Material		polycarbonate (PC), UL 94 VO f1
Design		bayonet with anti-tamper locking screw
Mounting	surface mounting (wall bracket and tubular stand available as accessories)
Cable entry	1 x 5-7 mm push through grommet (bottom side); 2 x M20 cable entries sideways
Connecting terminals		screw terminals 1.5 mm2
Weight		510 g

Dimensions

cable entry 2 x M20

<![if ! IE]>

<![endif]>220

<![if ! IE]>

<![endif]>2058

Ø 140

ELECTRO-TECHNOLOGY FOR INDUSTRY

	cable entry	120°	mounting holes
	Ø 5-7 mm
			3 x Ø 5.4 mm
	25°		<![if ! IE]> <![endif]>Ø 110

47

85°

120°

Ordering details

Article numbers			P 400 SLF	P 400 SLH
Lens colour		Rated voltage	12 – 250 V *	12 – 250 V *
clear			213 40 62 1 000	213 42 61 1 000
yellow			213 40 62 3 000	213 42 61 3 000
amber			213 40 62 4 000	213 42 61 4 000
red			213 40 62 5 000	213 42 61 5 000
green			213 40 62 6 000	213 42 61 6 000
blue			213 40 62 7 000	213 42 61 7 000

* Please order light bulb separately

Options / accessories

						only in		See pages 122-124 for further information
Wall			Tubular		Wall
						combination
bracket			stand		holder	with tubular
			145 mm			stand
Article number:		Article number:			Article number:		Light source
213 94 00 0 000		213 95 00 0 000			282 50 20 0 000

Conformity to standards

The visual characteristics of continuous lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.

Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fulfilled. The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:

‘Coding of display devices and control elements using colours and supplementary means’.

References to visual alarm devices can be found in the following standards:

EN 60825-1	Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54	Fire alarm systems
DIN 54113-2	Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV

<![if ! IE]>

<![endif]>Continuous Lights

94		95