Visual signaling devices
ELECTRO-TECHNOLOGY FOR INDUSTRY
SPECTRA series LED multifunction lights
P 400 LDA (Ø 140 mm) / P 300 LDA (Ø 100 mm)
• LED multifunction lights for extreme requirements
• energy-saving and durable thanks to the use of maintenance-free
LED technology
• as standard with on-site selectable signalling mode (9 different modes)
• externally switchable signaling mode (for DC versions only)
• large variety of mounting methods due to modular design principle:
– surface-mounted devices for mounting directly or on a wall bracket
or a tubular stand
– also for exposed installation locations through combination of
wall bracket and tubular stand
– cable entry at the side or through the base of the housing
P 400 LDA P 300 LDA
r =
9 m
Range as
per EN 54
r =
7 m
Range as
per EN 54
IP 65
Protection
system
+ 50 °C
- 25 °C
Operating
temperature
Electrical data P 400 LDA P 300 LDA
Rated voltage 115 V AC 230 V AC 12 / 24 V DC 115 / 230 V AC 12 / 24 V DC
Operating range 100 V – 130 V 207 V – 253 V 10 V – 50 V 90 V – 253 V 10 V – 50 V
Nominal current consumption 140 mA 70 mA 400 mA @ 24 V DC
Mechanical data P 400 LDA P 300 LDA
Operating mode LED multifunction light with 9 internally selectable operating modes
Light source high output LED array
Light intensity (DIN 5037) clear lens 30 cd 20 cd
Lens colours yellow, amber, red, green, blue
Lens type prismatic
Operating temperature - 25 °C ... + 50 °C
Relative humidity 90% @ + 20 °C
Protection system according to EN 60529 IP 65
Service life of light source > 50.000 hrs
Material polycarbonate (PC), UL 94 VO f1
Design bayonet with anti-tamper locking screw
Mounting surface mounting (wall bracket and tubular stand available as accessories)
Cable entry 1 x 5-7 mm push through grommet (bottom side); 2 x M20 cable entries sideways
Connecting terminals screw terminals 1.5 mm
Weight
AC version 595 g 285 g
DC version 845 g 285 g
Operating modes Stage 1: internally selectable, stages 2 & 3 externally controllable (DC lights only)
P 400 LDA P 300 LDA
Mode Stage 1 Stage 2 (DC only) Stage 3 (DC only) Stage 1 Stage 2 (DC only)
1 all LEDs on alternating ash 2 Hz double ash 2 Hz all LEDs on alternating ash 2 Hz
2 rotation: slow “on” alternating ash 2 Hz all LEDs on rotation: slow “on” alternating ash 2 Hz
3 single ash 2Hz rotation: fast “off” all LEDs on single ash 2 Hz rotation: fast “off”
4 rotation: fast “on” single ash 2 Hz all LEDs on rotation: fast “on” single ash 2 Hz
5 rotation: slow “off” double ash 1 Hz all LEDs on rotation: slow “off” double ash 1 Hz
6 double ash 1 Hz rotation: fast “off” all LEDs on double ash 1 Hz rotation: fast “off”
7 rotation: fast “off” double ash 2 Hz all LEDs on rotation: fast “off” double ash 2 Hz
8 double ash 2 Hz alternating ash 2 Hz double ash 2 Hz alternating ash 2 Hz all LEDs on
9 alternating ash 2 Hz rotation: fast “off” alternating ash 2 Hz rotation: fast “off” all LEDs on
• durable, sturdy and functionally reliable due to the use of
high-quality plastic
• optimum illumination due to prismatic coloured lens
90 mA @ 115 V AC
50 mA @ 230 V AC
2
130 mA @ 24 V DC
Dimensions
P 400 LDA P 300 LDA
cable entry
220
20
cable entry
Ø 5-7 mm
25°
120°
47
85°
Ø 140
120°
2 x M20
58
mounting holes
3 x Ø 5.4 mm
Ø 110
150
Ø 100
27
cable entry
Ø 5-7 mm
45°
cable entry
M20
37
20
mounting holes
2 x Ø 5.4 mm
55
27.5
60°
Ordering details
Article numbers P 400 LDA P 300 LDA
Lens colour Rated voltage 230 V AC 115 V AC 12 / 24 V DC 115 / 230 V AC 12 / 24 V DC
yellow 213 48 10 3 000 213 48 15 3 000 213 48 90 3 000 213 38 17 3 000 213 38 90 3 000
amber 213 48 10 4 000 213 48 15 4 000 213 48 90 4 000 213 38 17 4 000 213 38 90 4 000
red 213 48 10 5 000 213 48 16 5 000 213 48 90 5 000 213 38 17 5 000 213 38 90 5 000
Article numbers for other colours on request
Options / accessories
for
P 400
Wall
bracket
Article number:
213 94 00 0 000
bracket
Article number:
213 92 00 0 000
Wall
for
P 300
Tubular
stand
145 mm
Article number:
213 95 00 0 000
for
P 400
Tubular
stand
140 mm
Article number:
213 93 00 0 000
for
P 300
only in
combination
Wall
holder
Article number:
282 50 20 0 000
with tubular
stand
See pages 122/123 for
further information
Conformity to standards
The visual characteristics of LED lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.
Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fullled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
‘Coding of display devices and control elements using colours and supplementary means’.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
LED Lights
76 77
Loading...