Visual signaling devices
ELECTRO-TECHNOLOGY FOR INDUSTRY
SPECTRA series blinking lights 25 Watt
P 300 FLF / P 300 FLH (Ø 100 mm)
• blinking light for universal use
• optionally with halogen lamp or lament lamp
• large variety of mounting methods due to modular design principle:
– surface-mounted devices for mounting directly or on a wall bracket
or a tubular stand
– also for exposed installation locations through combination of
wall bracket and tubular stand
– cable entry at the side or through the base of the housing
• durable, sturdy and functionally reliable due to the use of
high-quality plastic
• optimum illumination due to prismatic coloured lens
P 300 FLF P 300 FLH
r =
10 m
Range as
per EN 54
r =
11 m
Range as
per EN 54
IP 65
Protection
system
+ 50 °C
- 25 °C
Operating
temperature
Electrical data P 300 FLF P 300 FLH
Rated voltage 230 V AC 115 V AC 24 V DC 230 V AC 115 V AC 24 V DC
Rated frequency 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz
Operating range 207 V – 253 V 100 V – 130 V 20 V – 28 V 207 V – 253 V 100 V – 130 V 20 V – 28 V
Nominal current consumption 130 mA 255 mA 1.1 A 116 mA 208 mA 1 A
Capacity of light source 25 W 25 W 25 W 25 W 25 W 20 W
• electronic components mechanically protected for highest mounting
security
• with on-site selectable blink frequency as standard
Dimensions
150
Ø 100
cable entry
M20
20
mounting holes
2 x Ø 5.4 mm
27
55
cable entry
Ø 5-7 mm
37
45°
60°
27.5
Blinking Lights
Mechanical data P 300 FLF P 300 FLH
Operating mode blinking light halogen blinking light
Light source lament lamp E14 halogen lamp G6.35 / GY6.35
Light power adjustable on the device
Lens colours clear, yellow, amber, red, green, blue
Lens type prismatic
Operating temperature - 25 °C ... + 50 °C
Relative humidity 90% @ + 20 °C
Protection system according to EN 60529 IP 65
Material polycarbonate (PC), UL 94 VO f1
Design bayonet with anti-tamper locking screw
Mounting surface mounting (wall bracket and tubular stand available as accessories)
Cable entry 1 x 5-7 mm push through grommet (bottom side); 1 x M20 cable entry sideways
Connecting terminals screw terminals 1.5 mm
Weight 283 g 279 g
25 W @ 0.5 Hz / 1 Hz / 2 Hz 20 W / 25 W @ 0.5 Hz / 1 Hz / 2 Hz
3 blink frequencies – adjustable during installation
2
Ordering details
Article numbers P 300 FLF P 300 FLH
Lens colour Rated voltage 230 V AC 115 V AC 24 V DC 230 V AC 115 V AC 24 V DC
yellow 213 31 10 3 000 213 31 15 3 000 213 31 80 3 000 213 33 10 3 000 213 33 15 3 000 213 33 80 3 000
amber 213 31 10 4 000 213 31 15 4 000 213 31 80 4 000 213 33 10 4 000 213 33 15 4 000 213 33 80 4 000
red 213 31 10 5 000 213 31 15 5 000 213 31 80 5 000 213 33 10 5 000 213 33 15 5 000 213 33 80 5 000
Article numbers for other colours and voltages on request
Options / accessories
Wall
bracket
Article number:
213 92 00 0 000
Tubular
stand
140 mm
Article number:
213 93 00 0 000
only in
Wall
holder
Article number:
282 50 20 0 000
combination
with tubular
stand
Light source
See pages 122-124 for further information
Conformity to standards
The visual characteristics of blinking lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.
Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fullled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
‘Coding of display devices and control elements using colours and supplementary means’.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
70 71
Loading...