Visual signaling devices
SPECTRA series Compact Flashing Lights 1 Joules
P 200 STR / P 100 STR (Ø 60 mm)
Compact fl ashing light series, also for use where space is limited
• large variety of mounting methods due to modular design principle:
– panel-mounted devices with convenient plug contact (P100)
– surface-mounted devices for mounting directly or on a wall bracket
or a tubular stand (P200)
• durable, sturdy and functionally reliable due to the use of high-quality
plastic
• optimum illumination due to prismatic coloured lens
• also for exposed installation locations by combining wall bracket and
tubular stand
• high IP protection in any installation position
r =
2 m
Range as
per EN 54
IP 65
Protection
system
+ 50 °C
- 25 °C
Operating
temperature
Electrical data P 200 STR P 100 STR
Rated voltage 230 V AC 115 V AC 12 / 24 V AC/DC 230 V AC 115 V AC 12 / 24 V AC/DC
Rated frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz / DC 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz / DC
Operating range 207 – 253 V 100 – 130 V 10 – 30 V 207 – 253 V 100 – 130 V 10 – 30 V
Nominal current consumption 20 mA 30 mA
135 mA
@ 24 V DC
20 mA 30 mA
135 mA
@ 24 V DC
Mechanical data P 200 STR P 100 STR
Operating mode fl ashing light
Light source xenon fl ash tube
Flash energy 1 J @ 0.75 Hz
Light intensity (DIN 5037)
Lens colours clear, yellow, amber, red, green, blue
Lens type prismatic
Operating temperature - 25 °C ... + 50 °C
Relative humidity 90% @ + 20 °C
Protection system according to EN 60529 IP 65
Service life of the fl ash tube light emission still 70% after 5 000 000 fl ashes
Material polycarbonate (PC), UL 94 VO f1
Design bayonet with anti-tamper locking screw
Mounting
Connecting terminals screw terminals 1.5 mm
Weight
1
with a clear lens
1
surface mounting
(wall bracket and tubular stand available as accessories)
2
AC 89 g 105 g
DC 84 g 100 g
1 cd
panel-mounting: Ø 27.5 mm (PG29)
screw terminals 1.5 mm2 pluggable
62
Dimensions
P 200 STR P 100 STR
65.5
80
Flashing Lights
mounting holes
2 x Ø 4.5 mm
cable entry
Ø 8 mm
Ø 60
17.5
25
36
15
16
Ø 60
21.23
25
35.5
plug terminal connector
Panel cut-out
PG29
thread
37.5
Ordering details
Article numbers P 200 STR P 100 STR
Lens colour Rated voltage 230 V AC 115 V AC 12/24 V AC/DC 230 V AC 115 V AC 12/24 V AC/DC
yellow 213 24 10 3 000 213 24 15 3 000 213 24 89 3 000 213 14 10 3 000 213 14 15 3 000 213 14 89 3 000
amber 213 24 10 4 000 213 24 15 4 000 213 24 89 4 000 213 14 10 4 000 213 14 15 4 000 213 14 89 4 000
red 213 24 10 5 000 213 24 15 5 000 213 24 89 5 000 213 14 10 5 000 213 14 15 5 000 213 14 89 5 000
Article numbers for other colours on request
Options / Accessories
only for
P 200 STR
Wall
bracket
Article number:
213 90 00 0 000
Tubular
stand
137 mm
Article number:
213 91 00 0 000
only for
P 200 STR
only in
Wall
holder
Article number:
282 50 20 0 000
combination
with tubular
stand
See pages 120/121 for further information
Conformity to standards
The visual characteristics of fl ashing lights conform to the European standard DIN EN 842: “Machine safety - visual alarm signals“.
Requirements contained in the DIN EN 981 standard: “Machine safety - system of acoustic and visual alarm and information signals“, can be fulfi lled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
“Coding of display devices and control elements using colours and supplementary means“.
References to visual alarm devices can be found in the following standards:
EN 60825-1 Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54 Fire alarm systems
DIN 54113-2 Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
63
Loading...