Pfannenberg P 200 SLF, P 100 SLF Catalog Page

Visual signaling devices

SPECTRA series compact status lights

P 200 SLF / P 100 SLF (Ø 60 mm)

•compact status light series, also for use where space is limited

•large variety of mounting methods due to modular design principle:

–panel-mounted devices with convenient plug contact (P 100)

–surface-mounted devices for mounting directly or on a wall bracket or a tubular stand (P 200)

•durable, sturdy and functionally reliable due to the use of

high-quality plastic

•optimum illumination due to prismatic coloured lens

•also for exposed installation locations by combining wall bracket and tubular stand

•high IP protection in any installation position

r =		IP 65		+ 50 °C
2 m				- 25 °C
Range as		Protection		Operating
per EN 54		system		temperature
Electrical data						P 200 SLF	P 100 SLF
Rated voltage						12 – 250 V *	12 – 250 V *
Power consumption						5 W	5 W
* Light source not included

Mechanical data	P 200 SLF			P 100 SLF
Operating mode		continuous light
Light source		filament lamp BA9s
Light power		5 W
Lens colours	clear, yellow, amber, red, green, blue
Lens type		prismatic
Operating temperature		- 25 °C ... + 50 °C
Relative humidity		90% @ + 20 °C
Protection system according to EN 60529		IP 65
Material		polycarbonate (PC), UL 94 VO f1
Design	bayonet with anti-tamper locking screw
Mounting	surface mounting (wall bracket and tubular stand			panel-mounting: Ø 37.5 mm (PG29)
	available as accessories)
Connecting terminals	screw terminals 1.5 mm2			screw terminals 1.5 mm2, pluggable
Weight	77 g			90 g

ELECTRO-TECHNOLOGY FOR INDUSTRY

Dimensions
	P 200 FLF					P 100 FLF
		<![if ! IE]> <![endif]>80				<![if ! IE]> <![endif]>65.5	<![if ! IE]> <![endif]>Continuous Lights
		<![if ! IE]> <![endif]>25
						<![if ! IE]> <![endif]>25	<![if ! IE]> <![endif]>35.5
	Ø 60
	36				Ø 60	plug terminal
						connector
	17.5						Panel cut-out
mounting holes						21.23
2 x Ø 4.5 mm
			<![if ! IE]> <![endif]>15	<![if ! IE]> <![endif]>16		<![if ! IE]> <![endif]>thread PG29
cable entry Ø 8 mm
Ordering details
Article numbers			P 200 SLF			P 100 SLF
Lens colour	Rated voltage		12 – 250 V *			12 – 250 V *
clear			213 20 61 1 000			213 10 61 1 000
yellow			213 20 61 3 000			213 10 61 3 000
amber			213 20 61 4 000			213 10 61 4 000
red			213 20 61 5 000			213 10 61 5 000
green			213 20 61 6 000			213 10 61 6 000
blue			213 20 61 7 000			213 10 61 7 000
* Please order light bulb separately
Options / accessories
only for	only for		only in		See pages 122-124 for further information
Wall P 200 SLF	Tubular P 200 SLF	Wall	combination
bracket	stand	holder	with tubular
	137 mm		stand
Article number:	Article number:	Article number:		Light source
213 90 00 0 000	213 91 00 0 000	282 50 20 0 000

Conformity to standards

The visual characteristics of continuous lights conform to the European standard DIN EN 842: ‘Machine safety – visual alarm signals’.

Requirements contained in the DIN EN 981 standard: ‘Machine safety – system of acoustic and visual alarm and information signals’, can be fulfilled. The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:

‘Coding of display devices and control elements using colours and supplementary means’.

References to visual alarm devices can be found in the following standards:

EN 60825-1	Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54	Fire alarm systems
DIN 54113-2	Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV

100		101