Page 1
Page 2
PetSpy Premium Dog Training Collar, Models M919-1/M919-2
What is in the Package:
M919-1/M919-2
• Remote Transmitter
• Receiver Collar / E-Collar
Radio Frequency: 900 Mhz
Built-in Batteries information:
Transmitter: 3.7V 500mA Li-ion
Receiver: 3.7V 500mA Li-ion
Contact: [email protected]
Visit www.petspystore.com to
download helpful Dog Training
Guide, User Manuals or watch
operational videos.
Receiver Contact Points Testing Light Kit Charger and USB Cable
Note: PetSpy Premium Dog Training Collar can be used with 1 (model M919-1),
2 (model M919-2) or 3 collars. e manual is designed for all versions.
Copyright © 2015-2017 PetSpy Inc. All rights reserved.
Page 3
PETSPY PREMIUM DOG TRAINING COLLAR
Dear Customer, thank you very much for choosing the PetSpy Brand! It’s our
pleasure to serve you and your beloved dog. Our mission is to ensure your pet’s
safety and happiness by providing you with the tools and techniques to successfully
train your dog. If you have any questions, please visit our website or contact PetSpy
Customer Service at
1. Intensity Level - indicates the intensity level of
Static Shock and Vibration in the range from 0-100.
2. Beep/Tone Indicator - ashes when beep is sent.
3. Static Shock Button - press the button to deliver
Static Shock to the collar. Hold it down for continuous shock delivery - it will stop automatically
aer 10 seconds to avoid injury.
4. Tone/Beep Button - press the button to send an
audible tone/beep to the receiver collar. When your
dog is well trained, the tone button is all you need
to eectively interact with dog.
5. Channel Switch/Tracking Light - the remote has
3 channels that allow you to work with up to 3 dogs.
Press the button to switch between channel 1-3.
Please refer to
with Receiver Collar
can reprogram the system to work with 1-3 collars.
Tracking Light
for 3 seconds it will turn on/o the Receiver Tracking Light, so you can track your dog in the dark.
6. Level UP “+“- press the button to increase the
level of intensity by 1 point. Hold it down for a
faster change.
7. Charging Port - use it to recharge the remote.
8. Level Down “-“ - press the button to decrease the level of intensity by 1 point.
Hold it down for a faster change.
9. Vibration Button - press the button to deliver Vibration stimulation to your dog.
Hold it down for continuous vibration - it will stop automatically aer 10 second
to avoid injury.
10. Channel Indicator - shows the channel number that has been selected.
11. Battery Charge Indicator - recharge the remote when it shows a low level.
Synchronizing Remote Transmitter
paragraph to learn how you
- If you press and hold the button
we will be happy to assist you!
Page 4
FEATURES
1. 4 Training Modes: Static Shock, Vibration, Tone, and Tracking Light.
2. Rechargeable Transmitter and Receiver - recharge time is about 3-4 hours.
3. Fully waterproof Receiver Collar.
4. e system communication range is up to 1000 yards (in ideal conditions).
5. 100 levels of Static Shock and Vibration Stimulation - makes it perfect for all breeds.
6. e remote can be used with up to 3 collars which allows you to control up to 3 dogs.
7. Power saving design with Auto Sleep Mode and Remote Activation: the receiver
collar will go to Sleeping Mode aer 5 minutes of being inactive - send any command from remote to wake it up.
8. Non-metallic conductive contact points specically designed to avoid skin
irritation.
HOW DOES PETSPY DOG TRAINING SYSTEM WORK?
PetSpy Dog Training System can assist you with controlling and training your dog
without a leash in the range up to 1000 yards. Using a Remote Transmitter you
can send a signal to the collar in form of Static Shock, Vibration, or Tone. By using
PetSpy Dog Training System consistently, you can train your dog to eliminate any
undesired behavior (jumping up, digging, chasing, etc.) and teach your dog many
obedience commands (sit, come, stay, etc). Please refer to PetSpy Dog Training
Guide for more training tips.
IMPORTANT NOTES
•e Remote System range goes up to 1000 yards. Hold the Transmitter horizontally and away from your body to achieve maximum range. Weather condition,
terrain, vegetation, and interference from other electronic devices can aect the
maximum communication distance of the system.
•ere are 100 levels of Static Shock and Vibration Simulation. If you use the strongest level there is a chance that it can penetrate dog’s fur up to 6mm thick. Do not
shave your Dog’s neck to reduce the risk of skin irritation.
•For comfort, safety, and eectiveness of the system, please start training your pet
with the lowest Static Shock level. It’s ne to have a Vibration level on medium or
high. Please check your dog’s neck aer each training session for skin irritation.
If skin irritation develops, discontinue to use the collar for 48 hours. If condition
persist beyond 48 hours, please consult your veterinarian.
•Do not attach a leash to the collar. Use a separate collar if there is a need for a leash.
•We suggest you to use the Vibration Stimulation rst before starting to use the
Static Shock. en slowly start training with the lowest level of Static Shock Stimulation. If you follow this training method, your dog will learn that Static Shock
Stimulation will come aer Vibration. Hence, the Vibration alone can eectively
cure unwanted behavior of your dog without a need for Static Shock.
Page 5
PREPARING REMOTE TRANSMITTER FOR YOUR FIRST USE:
Make sure that Remote Transmitter is charged before proceeding to the training:
1. e charging port is located at the bottom of remote. Carefully insert the
charging cable into the charging port.
2. e Battery Charge Indicator will start ashing. It takes about 3-4 hours to get a
full charge.
3. e remote transmitter is not waterproofed - keep it in a dry place!
REMOTE TRANSMITTER OPERATION
1. e remote always stays in the Stand-by Mode. Simply press any button to wake
it up.
2. If you have 2 or 3 collars, you can select which collar is being controlled (1, 2, 3)
by pressing the Channel Switch Button.
3. Press the Vibration Button to deliver Vibration Stimulation to your dog.
4. Press the Static Shock Button to deliver Static Shock to your dog.
5. Press the Tone/Beep Button to deliver beeping tone to your dog.
6. You are welcome to attach a lanyard for your convenience.
Page 6
PREPARING RECEIVER COLLAR FOR YOUR FIRST USE:
Make sure that Receiver Collar is charged before proceeding to the training:
1. Carefully open the rubber cover over the charging port and connect the charger.
2. Red LED light will start ashing to indicate that receiver is charging.
3. Red LED indicator will stop ashing and turn solid red when collar is fully
charged. It takes about 2-4 hours.
4. Put the rubber cover back over the charging port to ensure collar is fully waterproof.
RECEIVER COLLAR OPERATION
1. When Receiver is charged and turned on, it always stays in the Standby Mode
waiting for any command to activate it. Red ashing LED indicates that receiver is
active.
2. If receiver is charged and turned on but it still does not respond to any command from remote - it has to be re-synchronized.
SYNCHRONIZING REMOTE TRANSMITTER WITH RECEIVER COLLAR
Sometimes the collar can loose connectivity with remote. e x is pretty quick
and simple. Follow these steps to re-synchronize the system:
1. Make sure that both the Transmitter and Receiver are fully charged and turned on.
2. Press and hold the Power button on the Receiver Collar for about 5 seconds to
enter the Synchronization Mode - the receiver will beep rst and right aer that
red LED will start ashing.
3. While red LED is ashing, send any correction command from remote. We recommend you to send a Vibration command by pressing and holding the Vibration
button on remote until you feel that collar is vibrating. If no command is sent, the
ashing will stop aer 15 seconds.
4. e system is now resynchronized - try to send any command to test it.
If you have 2 or 3 collars, repeat this steps for all collars on channels 1, 2 and 3.
Page 7
TESTING PETSPY DOG TRAINING SYSTEM
Static Shock Test:
•Take the included Test Light Kit and put its metal wire
on the Receiver Collar’s Contact Points.
•Press the Static Shock Button on the Remote Transmitter.
•e Test Light will light up indicating that Shock is
working.
•e higher the Shock level is the brighter it should be.
Vibration Test:
•Press the Vibration Button on the Remote Transmitter.
•e Receiver Collar will vibrate indicating that Vibration Stimulation is working.
•Try to adjust the level of vibration and see how the intensity is changing.
Receiver Tone/Beep Test:
•Press the Receiver Tone Button on the Remote Transmitter.
•e Receiver Collar will beep indicating that Receiver Tone is working.
COLLAR FITTING:
CAUTION: proper tting and placement of PetSpy Dog Training Collar is important for eective training. e collar must t your dog securely, but loose enough to
allow one nger space between the collar and your dog’s neck. e Contact Points
must have direct contact with your pet’s skin on the underside of dog’s neck.
Putting the Collar On:
1. Have your dog standing comfortably.
2. Center the Contact Points beneath the dog’s neck and touching the skin.
3. e Collar should t securely, yet loose enough to allow one nger space between the collar and dog’s neck.
4. Allow your dog to wear the collar for several minutes and check the tment
again when your dog becomes more comfortable wearing the collar.
FIND THE BEST STIMULATION LEVEL FOR YOUR DOG
CAUTION: Start with Vibration mode and use Static Shock only as a last resort.
PetSpy e-collar is a powerful tool for encouraging desired dog’s behavior. But
rst, you must identify an e-collar intensity setting for your dog - it has to be high
enough to be noticed, but not so high as to be disruptive. Your dog must learn to
act in response to the e-collar stimulation and understand that he can control it by
his actions.
Page 8
You will nd this method of e-collar training is even gentler than many traditional
leash-training methods. Additionally, the e-collar improves communication by
providing instant feedback to your dog during the training. is reduces confusion, fosters a positive training attitude, and accelerates learning, rapidly producing
o-leash reliability.
Even if your dog already knows the basic obedience commands, follow the procedures given. Your dog must learn how to respond to the e-collar for each command
before you can use your PetSpy collar for training at a distance.
PetSpy Premium Dog Training Collar has 100 dierent stimulation levels. is
allows you to choose the level that is best for your pet. Once you have placed the
Receiver Collar on your pet, it is time to nd the Stimulation Level that is best for
him. is is called the
such as looking around in curiosity, scratching at his collar, or icking his ears,
indicates the Recognition Level that is best for him.
Follow the steps below to nd your dog’s Recognition Level:
1. Starting at the Lowest Level of stimulation on the Remote (1-20), press the Vibration or Shock Stimulation Button continuously.
2. If your pet shows no reaction, repeat the Stimulation Level several times before
moving up to the next level.
CAUTION: YOUR DOG SHOULD NOT BARK OR PANIC WHEN RECEIVING
STIMULATION. IF THIS HAPPENS, THE STIMULATION LEVEL IS TOO
HIGH AND YOU NEED TO GO BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS.
3. Move up through the Stimulation Levels until your dog reliably responds to the
stimulation.
4. If your dog continues to show no response at the Highest Level, check the t of
the Receiver Collar. If your dog has long or thick fur you might have to trim it just
a little bit around the neck. en go back to step 1 and repeat the process. If this
still does not yield any results, test the collar to insure it’s working properly.
Please refer to PetSpy Dog Training Guide E-Book for more dog training tips. If
for some reason you don’t have it - just visit our website
download it - it is free!
Recognition Level
. A slight change in your pet’s behavior,
www.petspystore.com
to
GENERAL TIPS
• PetSpy Dog Training Collar is not design to be worn constantly. We recommend
you to limit collar usage just during the active Training Sessions. Always take o
the collar when you leave your dog unattended.
Page 9
• Most dogs will feel uncomfortable when wearing collar for the rst time. Don’t
use any commands until your dog has gotten used to the collar which will normally take several days.
• Eliminate one unwanted action or teach one obedience command at a time. If
you move to quickly with training, your dog may become confused.
• Be consistent in your training. Give your dog the same stimulation for each
unwanted action. We suggest you to use Vibration Stimulation before starting the
Static Shock Stimulation. If you follow this training method, your dog will learn
that Static Shock Stimulation might come aer Vibration. Hence, the Vibration
Stimulation alone can eectively cure unwanted behavior of your dog.
• Do not over-correct. Use as few stimulation as possible to train your dog.
• Following a predened scenario in all Training Sessions can dramatically improve
your chances of success.
• Should your dog react to the training by hiding or reacting fearfully, redirect his
attention to a simple command such as “Speak” or “Sit” to calm him down. Use
treats to help your dog understand which commands have been done correctly.
TROUBLESHOOTING
My PetSpy Premium Dog Training Collar is not working?
•Make sure that both the Remote Transmitter and Receiver Collar are fully
charged.
•Please follow the steps from
Collar
paragraph to make sure that transmitter is in sync with collar.
CAUTION: While the Receiver Collar is waterproof, the Remote Transmitter is
not and must be kept in a dry place! Water can irreversibly damage the Remote
Transmitter!
REGULAR MAINTENANCE AND STORAGE
•When not used, PetSpy Dog Training System must be kept in a dry place just like
any other electronic device.
•To prevent batteries from damage, charge both the Transmitter and Receiver
regularly even when it’s not used. Make sure you do not charge it for longer than 4
hours.
•Clean the receiver and contact points weekly.
•Check your dog’s neck for irritation weekly.
Synchronizing Remote Transmitter with Receiver
Page 10
FREQUENTLY ASKED QUESTIONS
1. Is PetSpy Receiver Collar waterproof?
Answer:
2. Is PetSpy Remote Transmitter waterproof?
Answer:
3. Once my dog is trained do we have to continue wearing the collar?
Answer:
time.
4. How long can I continuously deliver Vibration or Static Shock to my dog?
Answer:
your dog continuously is 10 seconds. e remote transmitter will time out and the
Vibration or Static Shock button must be released and pressed again.
CAUTION: While it is ne to use the Vibration for up to 10 seconds, it is highly
recommended to limit the continuous Static Shock delivery to 5 seconds or less
(the smaller the dog the shorter it should be).
5. What should I do if my dog’s neck becomes red and irritated?
Answer:
persists beyond 48 hour please consult your veterinarian.
6. Can I attach a leash to the Receiver collar?
Answer:
dog’s neck. Use a separate collar when needed.
7. How long can I keep the Receiver Collar on my dog?
Answer:
it only during active training sessions or other outdoor activities (max 4 hours per
day).
8. How long should the training session be?
Answer:
Should you have any questions, feel free to contact us at [email protected]
Yes, the Receiver Collar is fully waterproof.
No, the Remote Transmitter must be kept away from water.
No, but you might have to reinforce training with e-collar from time to
e max amount of time you can deliver the Vibration or Static Shock to
Stop using the product immediately for at least 48 hours. If the condition
No, this can result in pulling the contact points to tightly against your
e Collar is not design to be worn continuously. We recommend to wear
Training sessions should be short and positive (10-15 minutes).
Page 11
TERMS OF USE AND LIMITATION OF LIABILITY
1. Terms of Use
is Product is designed to be used with dogs where training is desired. e specic temperament of your dog may not work with the product. We do not recommend you to use this product if your pet is less than 8 lbs or under 6 months old,
or if your pet is aggressive. If you are unsure whether this is appropriate for your
pet, please consult your veterinarian, or a certied trainer. Proper use includes
reviewing the entire User Manual and Dog Training Guide provided with the product. Pay extra attention to all Caution statements.
2. No Unlawful or Prohibited Use
is Product is designed for use with dogs only. PetSpy dog training collar is not
intended to harm, injure, or provoke. Using this product in a way that is not intended could result in violation of Federal, State or local laws.
3. Limitation of Liability
In no event shall we be liable for any direct, indirect, punitive, incidental, special
or consequential damages, or any damages whatsoever arising out of or connected
with the use or misuse of this Product. Buyer assumes all risks and liability from
the use of this Product.
4. Modication of Terms and Conditions
We reserve the right to change the terms, conditions and notices under which this
Product is oered.
WARRANTY
PetSpy Premium Dog Training Collar comes with a
you have any issue with your training collar - please send us an email and we will
be happy to assist you! We also oer an extended customer support program.
Limited 1-Year Warranty
. If
Copyright © 2015-2017 PetSpy Inc. All rights reserved.
Loading...