How it Works
Petsafe
Loading...
R
S
T
U
V
W
Y
Z
Loading...
Loading...
Stubborn Dog In-Ground Radio Fence

Petsafe Stubborn Dog In-Ground Radio Fence Operating And Training Manual

PetSafe® Stubborn Dog
™
In-Ground Radio Fence
Operating and Training Guide
Guide d’emploi et de dressage
Guía para el uso y el amaestramiento
Veuillez lire entièrement le guide avant de commencer.
Por favor, lea completamente esta guía antes de comenzar.
Thank you for choosing PetSafe®, the best selling brand of electronic training solutions in the world. Our mission is to be the most trusted brand in the pet ownership experience. We want to ensure your pet’s safety by providing you with the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net.
To get the most protection out of your limited warranty, please register your product within 90 days at www.petsafe.net. By registering, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. Additionally, you will not have to save your product receipt as registering serves as proof of purchase. Most importantly, PetSafe will never give or sell your valuable information to anyone.
___________________________________________ Table of Contents
Components ................................................................................................................................... 3
Other Items You May Need .............................................................................................................. 3
How the System Works .................................................................................................................... 4
Key Defi nitions ............................................................................................................................... 4
Operating Guide
Locate the Fence Transmitter ....................................................................................................... 5
Lay Out the System ..................................................................................................................... 5
Sample Layouts ........................................................................................................................... 6
Position the Boundary Wire ......................................................................................................... 7
Connect the Wires to the Fence Transmitter ................................................................................. 8
Prepare the Receiver Collar.......................................................................................................... 8
Set the Boundary Width and Test the Receiver Collar ...................................................................10
Install the Boundary Wire ...........................................................................................................11
Place the Boundary Flags ...........................................................................................................12
Fit the Receiver Collar ................................................................................................................12
Training Guide
Be Patient With Your Pet .............................................................................................................14
Day 1 - Boundary Flag Awareness ...............................................................................................14
Days 2 thru 4 - Continue Boundary Flag Awareness ....................................................................15
Days 5 thru 8 - Distraction Phase ...............................................................................................15
Days 9 thru 14 - Unleashed Supervision ......................................................................................16
Days 15 thru 30 - Pet Monitoring ...............................................................................................16
Taking Your Pet Out of the Pet Area ............................................................................................16
Accessories ....................................................................................................................................17
Troubleshooting ............................................................................................................... ..............18
Short Loop Test .............................................................................................................................19
To Locate a Break in the Boundary Wire .........................................................................................20
Terms of Use and Limitation of Liability .........................................................................................20
FCC ..............................................................................................................................................21
Caution .........................................................................................................................................21
Product Warranty ...........................................................................................................................21
Français .......................................................................................................................................22
Español ........................................................................................................................................42
Layout Grid ...................................................................................................................................64
Mounting Template ........................................................................................................................64
2 1-800-732-2677 (US), 1-800-457-3911 (Canada)
Components
Pe
tS
a
f
e
®
S
t
u
b
b
o
rn D
o
g
I
n-
Gr
o
und
R
a
d
io
F
en
ce
™
O
pe
r
at
i
n
g an
d
T
ra
i
n
i
n
g
G
ui
de
G
u
i
d
e
d
’
e
m
p
l
o
i
e
t
d
e
d
re
s
s
a
g
e
Guí
a
para
el
u
so
y
e
l
a
m
ae
s
t
ra
m
ient
o
P
leas
e
r
e
a
d
thi
s
e
nt
i
r
e
g
u
i
d
e
b
e
fo
r
e
b
e
g
i
n
n
i
n
g.
V
e
uil
l
e
z
l
i
r
e
e
n
tière
m
e
n
t
l
e
g
ui
d
e
a
v
a
n
t
de
c
o
m
m
e
nc
e
r
.
P
o
r
f
a
v
o
r
,
l
e
a c
o
mp
l
e
t
a
m
e
n
te
e
st
a
guí
a
a
n
t
e
s
d
e
c
o
m
e
n
z
a
r
.
Power
Adapter
Test Light
Tool
Transmitter
Receiver Collar w/Short Contact Points
Fence
Long
Contact Points
Boundary Wire - 500 ft.
Wire Nuts
Installation and
(English Only)
9-Volt Alkaline
Battery
P
E
E
T
F
S
A
S
H
S
A
R
P
E
P
N
Y
W
O
STUBBORN DOG
In-Ground
™
FENCE
Streaming Video
available at
www.petsafe.net
417-225
Installation and Training
DVD
RFA-200
©
n
C
o
i
o
t
p
a
r
y
o
r
i
p
g
r
h
o
t
C
2
0
s
0
m
6
e
,
t
s
R
y
a
S
d
i
o
Training DVD
Boundary Flags - 50
Operating and
Training Guide
Other Items You May Need
• Additional wire and fl ags (Part #PRFA-500)
• Tape measure
• Small Phillips screwdriver
• Drill & mounting hardware
• Shovel or lawn edger
• Pliers
• Wire stripping pliers
• Scissors
• Lighter
• Electrical tape
• Additional wire nuts
• Waterproofi ng compound (e.g. silicone caulk)
• PVC pipe or water hose
• Circular saw with masonry blade
• Patching compound
• Staple gun
• Non-metallic collar and leash
Note: For information on professional installation of your new PetSafe® In-Ground Radio FenceTM, contact the Customer Care Center at 1-800-732-2677 or visit our website at www.invisiblefence.com.
www.petsafe.net 3
How the System Works
This PetSafe® In-Ground Radio Fence™ has been proven safe, comfortable, and effective for pets over 8 pounds. The system works by producing a radio signal from the Fence Transmitter through up to 2800 feet of Boundary Wire. The Boundary Wire is buried or attached to a fi xed object to enclose the Pet Area. You temporarily defi ne this Pet Area with Boundary Flags for a visual aid in training your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and once trained, is allowed to roam freely in the Pet Area. When your pet reaches the Warning Zone, the Receiver Collar gives a warning beep and vibrates. If your pet continues into the Static Correction Zone, a safe Static Correction will be delivered through the Contact Points to get his attention until he returns to the Pet Area.
Key Definitions
Fence Transmitter: The device that transmits the radio signal through the Boundary Wire. Pet Area: The area within the Warning Zone where your pet can roam freely. Warning Zone: The outer edge of the Pet Area where your pet’s Receiver Collar begins to beep and vibrates for 2 seconds,
warning him not to go into the Static Correction Zone. Static Correction Zone: The zone beyond the Warning Zone where your pet’s Receiver Collar will emit a Static
Correction, signaling him to return to the Pet Area.
Boundary Width: The combination of the Warning Zone and the Static Correction Zone. Receiver Collar: The device that receives the radio signal from the Boundary Wire. Correction Level Button: The button to adjust the level of Static Correction your pet receives in the Static Correction Zone. Receiver Indicator Light: The light that indicates the level of correction at which the Receiver Collar is set. This light also
serves as a low battery indicator. Contact Points: The contacts through which the Receiver Collar delivers the safe Static Correction when your pet moves
into the Static Correction Zone. Power Jack: The jack where the Power Adapter plugs into the Fence Transmitter. The Fence Transmitter is powered by a
standard 120-volt outlet.
Boundary Control Switch: The switch to adjust according to the length of Boundary Wire used. Boundary Wire Ter minals: The terminals where the Boundary Wires connect to the Fence Transmitter in order to
complete a continuous loop. Loop Indicator Light: The light that indicates that the Boundary Wire makes a complete loop, enabling the signal to be
transmitted.
Boundary Width Control: The knob that adjusts the width of the Warning and Static Correction Zones. Note: Adjusting the knob does not change the level of Static Correction on the Receiver Collar.
Fence
Transmitter
Static Correction
Zone
Warning
Zone
Pet Area
Static Correction
Zone
Warning
Zone
Boundary
Width
4 1-800-732-2677 (US), 1-800-457-3911 (Canada)
Receiver Collar
Receiver Indicator Light
Washers
Contact Points
Correction Level Button
Fence Transmitter
Power Jack
Boundary Control Switch
Boundary Wire
}
Terminals
Loop Indicator Light
Power Light Boundary Width
Control
10
Twists/ft.
Operating Guide
Step
1
Locate the Fence Transmitter
Place the Fence Transmitter:
• In a dry, well ventilated, protected area (1A, 1B).
• In an area where temperatures do not fall below freezing (e.g., garage, basement, shed, closet).
• Secured to a stationary surface using appropriate mounting hardware (not included). A mounting template is included on the back of this guide.
• At least 3 feet from large metal objects or appliances as these items may interfere with the signal consistency (1C).
Once you have mounted the Fence Transmitter, the Boundary Wire must exit the building. This can be accomplished via a window or through a 1/8” hole drilled through the wall. Ensure the drill path is clear of any utilities. Make sure the Boundary Wire is not cut off or pinched by a window, door, or garage door, as this can damage it over time.
To prevent fi res and electrical hazards, install the Fence Transmitter in buildings that are in accordance with state and local electrical codes.
1A
1B
__________________________________________________
1C
3ft.
Step
2
Lay Out the System
Basic Planning Tips
• The Boundary Wire MUST start at
the Fence Transmitter and make a continuous loop back (2A).
• Design a layout that is suitable for your
yard. Sample layouts are provided in this section, and a grid for designing your layout is provided on the back of this guide.
•
Fence planning software is available online at www.petsafe.net. After you have planned and saved your layout online, contact our Customer Care Center to review and refi ne your layout.
• Twisting the Boundary Wire cancels the signal and allows your pet to cross over that area safely. Plastic or metal piping will not cancel the signal. Twist the Boundary Wire 10 to 12 times per foot to cancel the signal (2A).
• Always use gradual turns at the corners to produce a more consistent boundary (2B). Do not use sharp turns, as this will cause gaps in your boundary.
• Avoid making passageways too narrow for your pet to move about freely (e.g., along the sides of a house).• The Receiver Collar can be activated inside the house if the Boundary Wire runs along the outside wall of the house. If this occurs, remove your pet’s Receiver Collar before bringing him inside, decrease the range using the Boundary Width Control knob or consider an alternative layout.
2A 2B
www.petsafe.net 5
Sample Layouts
3-5'
3-5'
Sample 1: Perimeter Loop (Single Loop)
The Perimeter
B
Loop is the most common layout. This will allow your pet to freely and safely
A
roam your entire property (2C). It can also protect gardens, pools and landscaping (2D).
Sample 2 (2E): Perimeter Loop Using Existing Fence (Single Loop)
This layout allows you to include your existing fence as part of your layout and keep your pet from jumping out or digging under your existing fence. It reduces the amount of wire which will need to be buried. From the Fence Transmitter, run the wire to A, A to B, B to C, C to D, D to E, E to A, twist the wires from A back to the Fence Transmitter. See the “Install the Boundary Wire” section for more information on attaching the wire to a fence.
Double Loop
A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property. When using a Double Loop, the Boundary Wire must be separated by a minimum of THREE TO FIVE FEET to
avoid canceling the signal. Remember that a Double Loop will require twice as much wire.
C
D
E
D
C
A
B
A
B
C
E
F
E
F
D
Sample 3 (2F): Front or Back Yard Only (Double Loop)
From the Fence Transmitter, run the wire to A, A to B, B to C, C to D, D to E, E to F, make a U­turn and follow your path all the way back to A, keeping the wire separated three to fi ve feet. Twist the wire from A back to the Fence Transmitter.
B
A
Sample 4 (2G): Front Boundary Only (Double Loop)
From the Fence Transmitter, run the wire to A, A to B, B back to A keeping the wire separated three to fi ve feet. Twist the wire from A back to the Fence Transmitter.
E
B
A
C
D
Sample 5 (2H): Lake Access (Double Loop)
From the Fence Transmitter, run the wire to A, A to B, make a U-turn and go to C, C to D, D to E, make a U-turn and follow your path all the way back to A keeping wire separated three to fi ve feet. Twist the wire from A back to the Fence Transmitter.
6 1-800-732-2677 (US), 1-800-457-3911 (Canada)
Sample 6 (2J): Wire Loop Attached to Existing Fence (Double Loop)
3-5'
10
Twists/ft.
This layout allows you to include your existing fence as part of your layout and keep your pet from jumping out or digging under your existing fence. It reduces the amount of wire which will need to be buried. Run the wire from the Fence Transmitter to A, A to B, B to C, C to D, D to E, E to F, make a U-turn and follow your path all the way back to A, feet. Twist the wire from A back to the Fence Transmitter. See the “Install the Boundary Wire” section for more information on attaching the wire to a fence.
keeping the wire separated three to fi ve
C
A
B
D
F
__________________________________________________
E
Step
3
Position the Boundary Wire
Lay out the Boundary Wire using your proposed boundary and test the system BEFORE burying the wire or attaching it to an existing fence. This will make any layout changes easier.
Running the Boundary Wire parallel to and within fi ve feet of electrical wires, neighboring containment systems, telephone wires, television or antenna cables, or satellite dishes will cause an inconsistent signal. If you must cross any of these, do so at 90-degree angles (perpendicularly).
If separating the wire by at least fi ve feet from a neighboring containment system’s wire does not reduce the inconsistent signal, contact the Customer Care Center at 1-800-732-2677.
To Twist the Boundary Wire (3A)
Twisting the Boundary Wire cancels the signal and allows your pet to cross over that area safely. Plastic or metal piping will not cancel the signal.Twist the Boundary Wire 10 to 12 times per foot to cancel the signal. The maximum length of twisted wire is 50 feet.
To Splice or Repair the Boundary Wire (3B)
If you need additional Boundary Wire to expand your wire loop, you will need to splice the wires together. Note the locations of all splices for future reference. Most Boundary Wire breaks occur at splices.
Strip approximately one-half inch of insulation off the ends of the Boundary Wires to be spliced. Make sure the copper Boundary Wire is not corroded. If the Boundary Wire is corroded, cut it back to expose clean copper wire.
Insert the stripped ends into the wire nut and twist the wire nut around the wires. Pull on the wires to make sure you have a strong splice connection. Apply waterproofi ng compound (e.g. silicone caulk) in and around the wire nut or wrap the wires and the wire nuts with electrical tape to prevent moisture from corroding the copper.
If your splice pulls loose, the entire system will fail. Make sure your splice is secure.
1/2"
1/2"
1
2
www.petsafe.net 7
Loading...
+ 15 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use