PetSafe® Paw z Away™
Extra Outdoor
Pet Bar rier
Operating and Training Guide
Please read this entire guide before beginning.
Thank you for choosing PetSafe®, the best selling brand of electronic training
solutions in the world. Our mission is to be the most trusted brand in the pet
ownership experience. We want to ensure your pet’s safety by providing you
with the tools and techniques to successfully train your pet. If you have any
questions, please contact the Customer Care Center at 1-800-732-2677 or
visit our website at www.petsafe.net.
To get the most protection out of your warranty, please register your product
within 30 days at www.petsafe.net. By registering and keeping your receipt,
you will enjoy the product’s full warranty and should you ever need to call the
Customer Care Center, we will be able to help you faster. Most importantly,
PetSafe® will never give or sell your valuable information to anyone. Complete
warranty information is available online at www.petsafe.net.
Table of Contents
How the Pawz Away™ Outdoor Pet Barrier Works ......................................... 3
Operating Guide - Wireless Option ........................................................ 4
Power Up the Barrier Transmitter ............................................................ 4
Set Up the Barrier Transmitter .................................................................4
Test the Barrier Area ............................................................................... 4
Operating Guide - Wire Option .............................................................. 6
Determine Placement of Barrier Transmitter & Wire Layout...................... 6
Connect the Wires to the Barrier Transmitter ............................................ 7
Test the Barrier Area ............................................................................... 8
Install the Boundary Wire ........................................................................ 8
Training Guide .......................................................................................10
Begin Your Pet’s First Session .................................................................10
Further Training .....................................................................................10
Additional Information ..............................................................................10
Troubleshooting ......................................................................................11
Terms of Use and Limitation of Liability ....................................................12
Compliance ..............................................................................................12
Customer Care International .....................................................................13
Caution ....................................................................................................13
2 Customer Care Center 1-800-732-2677
How the Pawz Away™ Outdoor Pet Barrier Works
The Barrier Transmitter, disguised as a rock in your landscape, sends a spherical radio signal up to
16 feet in diameter or an 8 foot radius. Your pet wears a Receiver Collar with Contact Points that
touch his neck. When your pet enters the Barrier Area, he’ll hear a series of audible tones from the
Receiver Collar and he will feel a safe progressive Static Correction, delivered through the Contact
Points on his neck. It is designed to startle, not to punish. The progressive Static Correction will
get your pet’s attention, but will not cause harm. The correction continues until your pet leaves
the Barrier Area. The system has been proven safe, comfortable and effective for pets at least 6
months old and over 5 pounds.
You also have the option to create a custom shaped barrier using Boundary Wire. Create a barrier
loop up to 150 feet.
Warning: This is a deterrence system designed to keep pets away from areas in your
landscape you want to protect. THIS IS NOT A CONTAINMENT SYSTEM. Do not use
this system to keep your pet contained in your yard. The static correction is not intended
to keep your pet contained.
www.petsafe.net 3
Operating Guide - Wireless Option
Step
Power Up the Barrier Transmitter
Locate the battery door on the bottom of the Barrier Transmitter. Loosen the 4 Phillips
head screws. The screws will stay in the battery lid. Install 4 alkaline D-batteries and
replace the battery door.
1
2
3
Under normal conditions, the batteries will operate the transmitter for up to one year. Test
the system every few months to ensure it is working properly.
Step
Set Up the Barrier Transmitter
Important: Never perform set-up procedures while your pet is wearing the
Receiver Collar.
Turn the Barrier Transmitter upright and open the lid 1.
exposing the LCD display and range buttons.
Press the up (+) button once to turn ON the Barrier 2.
Transmitter. A black segment in the bottom of the
LCD display indicates the unit is set to the lowest
range (1A).
Each segment represents approximately two feet of 3.
diameter. You can create a Barrier Area up to 16 feet
in diameter. Using the up (+) and down (-) buttons,
adjust the range to fi t the desired pet Barrier Area.
Step
Test the Barrier Area
Place the Test Light Tool that came with your system on 1.
the Receiver Collar Contact Points. Hold the Receiver
Collar at the approximate height of your dog’s neck and
with the Contact Points facing up (2A). Start outside of
the range and walk slowly toward the Barrier Transmitter .
As you reach the Barrier Area, the Receiver Collar emits a
series of high-pitched tones. For each tone y ou hear, you
should notice the Test Light fl ashing which indicates that
a progressive Static Correction is being delivered. The
Receiver Collar’s tone is easily heard by dogs but may be
at a volume level diffi cult for some humans to hear.
Check the range of the Barrier Area from multiple angles 2.
to ensure you are getting the desired coverage.
If you place the Barrier Transmitter close to your house,
the signal may transmit through a wall. Be sure to test
the receiver collar inside your home.
1A
2A
4 Customer Care Center 1-800-732-2677
Important: Should you fi nd that you are not getting the desired range at the
maximum setting, move the Barrier Transmitter a few feet. A variety of factors
can affect the magnetic fi eld. For best results, place the Barrier Transmitter on a
non-conductive surface, i.e., lawn or landscape bed. Metal objects may distort
the Barrier Area size.
Do not:
Place Barrier Transmitter on metal surfaces.•
Place Barrier Transmitter near large metal objects such as heating and air •
conditioning units, metal outbuildings, metal trash cans, etc.
Place the Barrier Transmitter in a location where it may become submerged in •
water. The transmitter is designed to be water resistant and is not waterproof.
For the longest battery life, avoid exposing the transmitter to extreme •
temperatures for any extended time.
www.petsafe.net 5