PETINCCN P680 User Manual

P680 User Manual
Please read this entire guide before beginning
Important Safety
Information
Not for use with aggressive dogs. Do not use this Product if your dog is aggr essive, or if your
dog is prone to aggressive behavior. Aggressive
Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too
tight
on the pet’s neck may cause skin damage. Ranging from redness to pressure ulcers;
this
condition is
commonly known as bed sores.
Avoid leaving the collar on the dog for more than 12 hours per
day
.
When possible reposition
the collar on the pet’s neck
every
1 to 2 hours.
Check
the fit to
prevent excessive pressure;
follow the
instructions
in this manual.
Never connect a lead
to
the electronic collar;
it will
cause excessive pressure on the
contacts.
When using a separate
collar for a
lead,
don’t put
pressure
on the
electronic
collar.
Wash
the dog’s neck
area
and the contacts of the collar
weekly
with a damp cloth.
Examine
the contact
area daily
for
signs
of a
rash
or a sore.
If a
rash
or
sore
is found,
discontinue use
of the collar until the skin
has
healed.
If the condition persists beyond 48 hours, see your veterinarian.
For additional information on bed sores and pressure necrosis, please visit our
website
These steps will help keep your pet safe and comfortable. Millions of pets are comfortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may
find
after some time that your pet is very tolerant of the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed.
PETINCCN
®
Remote Trainers must be used only on healthy dogs. We recommend that you take your dog to a
veterinarian before using the collar if he is not in good health
Thank you for choosing the PETINCCN® brand. Our mission is to ensure your pet's safety by providing you the tools and techniques to successfully train your pet.You and your pet deserve a companionship that includes memorable moments and a shared
understanding
together.
Please charge before using the product.
If the transmitter and receiver collar don't work for a long time, you
should charge it fully before keeping it idle, and charging it every one month.
Definitions:
1.
Antenna:transmit the signal to Receiver Collar
2.
LED Indicator:this light wi11 f1ash when transmitter works or when charging ,this light wi11 flash fast.
3.
LCD Screen:
z
0-100 Level: Shows Dog 1 or Dog 2 level of stimulation(Low-0 to High-100)
z
Static shock mode: under this mode ,press "Y" button ,Receiver will shock; press Up/down
button ,can adjust Static level from 0 to 100
z
Vibration mode: under this mode ,press "Y" button ,Receiver will vibrate; press Up/down button ,can
adjust Vibration level from 0 to 100
z
Beep mode: under this mode,press "Y" button,the receiver collar can get a "beep" sound
z
Channel 1
: select to encode between transmitter and the first of receiver collar
z
Channel
2: select to encode between transmitter and the second of receiver collar
z
Battery Indicator: The battery indicator provides constant awareness of your battery’s power level
4. Mode button: include 4 modes as Static Mode,Vibration Mode ,Beep Mode
5. Launch button: after you finish mode selecting ,press this button for confirmation
6. Channel button: press this button
can select to encode between transmitter and one of receiver
collar,or between transmitter and 2nd of receiver collar
7.Search button: press this button,can detect distance between the Transmitter and the Receiver Collar
8. Up/Down button: Intensity level button for Vibration or Static Shock or search distance
9.
Charging hole:
charge for Remote Transmitter
Receiver Collar: Delivers stimulation or tone on a signal from the Remote Transmitter.
Magnetic induction symbol:
Serves
as On/Off/Encode the
Receiver
Collar.
Contact
Points:
The contacts through which the
Receiver
Collar delivers Stimulation.
Receiver Indicator
Light:
Indicates when the
Receiver
Collar has been turned on or off or slept and also
serves
as a
low-battery
indicator.
Charging
Jacks: For connecting the charger. The Receiver Collar isn't waterproof without the charger cover.So
should be keep the covers in place tightly when not charging.
Featur
es
1. Chargeable Remote Transmitter and Receiver collar and Waterproof Receiver Collar.
2. 100 levels of vibration which can be altered from 0-100 by pressing Up & down button.
3. 100 levels of static shock (optional) which can be altered from 0-100 by pressing Up & down button.
4. In beep mode, it activates a tone on the Receiver Collar.
5. Search function which can be detect how far between the Transmitter and the Receiver Collar.
6. Power save:
• The Receiver Collar will go into deeply sleep if no operation for 5 minutes. And if press the "Y" button of the
transmitter or Magnetic induction it will activate the Receiver Collar.
• The transmitter will go into Standby mode if there is no operation after 8 seconds, press any button can
activate the transmitter from Standby mode. And press Mode button for more than 3 seconds go into deeply sleep
press Mode button for more than 3 seconds to activate the transmitter from deep sleep mode
7. The system can be used for 1 or 2 Receiver Collars.
8. Two pairs of metal prong (short/long) to suit dogs with varied fur thickness.
Operating Guide
Prepare the Remote
Transmitter
Charge the Remote Transmitter
1. Connect one of the charger connectors to
the
Remote Transmitter Charging
Jack.
2. Plug the charger into a standard wall
outlet.
3. Charge the Remote Transmitter for 5 hours for
the
first charge. Recharges take only 3-4 hours.
4.The LED indicator on the Transmitter will be fast flash every half second.
5.Charge the Transmitter at least 5 hours for the first charging.
6.After fully charged the LED indicator on the Transmitter will be back to normal working state automatically.
Battery Indicator
Battery is at 23 to Full capacity. Transmitter is fully functional Battery is at 13 capacity. Transmitter is still fully functional Battery is at 16 capacity. Transmitter will operate the Receiver, but should be recharged as soo
n
as possible
Battery is almost
dead.
Transmitter is unable
to
operate the Receiver
When
the
Battery
Indicator
shows
the low battery symbol
(1⁄
6
capacity), recharge
your
Tr ansmitt er
soon.
When
the battery
outline
is
displayed,
the
Transmitter’s
battery is
unable
to
power
transmissions
to the
Receiver. Transmitter
must be
recharged
to
regain
operation
How to use the Remote Transmitter
1.To turn on/off the Transmitterhold the Mode Button for more than 3 seconds.
2.Set to the different modes by pressing the Mode Button- The LCD images will change from.
3.Press Up/Down buttons on right hand to set Vibration or Static Shock or search level .Choose different channel for 1 or 2 Receiver Collars.
4.The Remote Transmitter will go into STANDBY MODE if not operated for 8 seconds and will TURN OFF if hold the Mode button more than 3 seconds.
5.In STANDBY MODEpress any button (except LED light button) to wake it up. When turn offhold the Mode Button for 3 seconds to TURN ON.
6.If press the search button the current Dog1 or Dog2 flash and now the distance can be altered by press the Up/Down button from 1-9. Press any key(except the Up/Down button) can be back to normal working state.
7.If press the Channel Button more than 3 seconds then the screen flash. Now can be changed the screen color by press the Up/Down button.And press any key(except the Up/Down button) can be saved it and back to normal working state.
Prepare the Receiver
Collar
1.Connect one of the charger connectors to
the
Remote Transmitter Charging
Jack.
2. Plug the charger into a standard wall
outlet.
3. Charge
the Receiver Collar for 5 hours for
the
first charge. Recharges take only 2-3 hours.
4.The LED indicator on the Receiver Collar will be fast flash every half second.
5.After fully chargedthe LED indicator on the Receiver Collar will be back to normal working state automatically
6.
The Receiver Co llar a ren't water pr oof wi tho ut the ch ar ge r cover s.So should be kee ped the cove rs i n pla ce tight ly w hen
not charging.
Encode between Remote Transmitter and Receiver Collar:
1.Turn on the Remote Transmitter by holding the Mode Button for 3 seconds or if it 's already turned on.
2.Choose channel 1 or 2.
3.Turn on the Receiver Collar by put the Magnetic induction symbol of the Transmitter and the Receiver tightly more than 1 second and less than 3 seconds and put the Transmitter away or if it 's already turned on
4.If the Receiver Collar turn on,then put the Magnetic induction symbol of the Transmitter and the Receiver tightly more than 3 seconds,the LED Indicator flash fast every half second,after that put away the Transmitter and hold the Search button more than 3 seconds,if the LED Indicator of Transmitter also flash fast,so Encode is successfully.
5. For 2nd Receiver Collar Encoderepeat step 2 to 4please be sure to choose different channel from 1st Receiver Collar.
NOTE:
Factory's fault set is Encoded successfully.
To test this system
The static impulse released by the Receiver Collar can’t be seen with naked eye. You can test the Stimulation by this way:
Test Static Shock Function
z Take out the test bulb from the package and wind its metal wire on the Receiver Collar's Contact Points. z Press Mode button of Remote Transmitter,switch to Shock Mode,confirm LCD display not to be 0,you can
press UP/DOWN button on the right side to adjust
z Press "Y" buttontest bulb will flash that means Shock function works.
Test Vibration Function
z Press Mode button of Remote Transmitter,switch to Vibrate mode, confirm LCD display not to be 0you can
press UP/DOWN button on the right side to adjust
z Press "Y" buttonthe Receive Collar will vibrate that means Vibration Function works
Test Beep Function
z Press Mode button of Remote Transmitterswitch to Beep Mode z Press "Y" buttonthe Receive Collar will make a sound "be-be be-be"that means Beep Function works
Test Search Function
z Press Search button of Remote Transmitter,press UP/DOWN button on the right side to adjust the distance of
the search.
z
Press "Y" button,if between the Transmitter and the Receive Collar distance is far than the choose distance, the Transmitter will make a sound "be-be be-be"on the other hand the Transmitter will vibrate.
Find the Best Stimulation Level for Y our
Pet
Important: Always start at the lowest level and work your way up.
The Remote Trainers have 100 different Stimulation Levels. This allows you to choose
the
Stimulation that is best for
your
pet.
Once you have placed the Receiver Collar on your pet, it is time to find the Stimulation Level that is best for him. This is called the Recognition Level.
A slight change in your pet’s behavior, such as looking around in curiosity, scratching at his collar, or flicking his
ears, indicates the Recognition Level that is best for
him.
Follow the steps below to find your pet’s Recognition Level:
1.
Starting
at
Level
1 on the
Digital Display, press
the
Stimulation
button
continuously
for 1 to 2 seconds.
2. If your pet shows no reaction, repeat the Stimulation level several times before moving up to the next level.
3. Your pet should not vocalize or panic when receiving stimulation. If this happens, the stimulation level is too high and you need to go back to the previous level and repeat the process.
4. Move up through the Stimulation levels until your pet reliably responds to the Stimulation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver.
o Connect the equipment to an outlet on a circuit different fr om that to which the receiver is
connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.
Loading...