
these Cat-Front™ pipe. However, you should carefully read these instructions before attempting to install it. If in doubt,
from the battery. Raise the front of the vehicle to obtain adequate access to the bottom exhaust manifold flanges.
from rolling off the jack stands.
heat the slip coupler at front of converter,slip converter off of Y-pipe.
THE SLIP JOINT IN THE Y-PIPE FULLY WELDED TO ELIMINATE ANY LEAKS.
Test drive vehicle, and check for leaks.

All products manufactured by AEP are guaranteed to be free from defects in materials and
workmanship at the time of sale. All products are guaranteed to fit the intended application, provided the
vehicle has not suffered structural damage or other modification*. Claims for damage occurring during
The purchaser will be responsible for freight to and from AEP.
AEP expressly disclaims, and the purchaser expressly assumes, responsibility for any incidental or
warranties terms are implied. The terms of this warranty are severable. Any provision voided by state
THE FOLLOWING WILL VOID THIS WARRANTY: Use of “ heat-wrap” products and/or the use of fuels
AEP cannot assume responsibility for compliance with local law and regulations regarding smog and
AEP reserves the right to change the design, materials, or specifications of any product without
©Copyright 2003 by Automotive Engineered Products Inc. All rights reserved.
AEP will repair or replace at its option
AEP will allow credit of 50% of the current list price
JBA • 7149-D Mission Gorge Rd. • San Diego, CA 92120 • 619-229-7797