Page 1
ELITE LONG LIFE
AUTOMOTIVE
Lubricants
A safety data sheet is available on request.
repsol.com
+34 901 111 999
Technical data sheet for Lubricants.
Description
lubricant help reduce fuel and lubricant consumption and therefore pollutant atmospheric emissions. Its
Properties
Results obtained in standardised VW testing with diesel particulate filters ensure that the oil is
Quality levels
Technical characteristics
Bosch Injector Shearing:
50700/50400 5W30
This is the synthetic lubricant oil developed by Repsol to meet the requirements of the most modern petrol and
diesel engines of the VW-Audi-Seat-Skoda group, as it meets the new VW 50700/504 00 specifications, which
include the requirement of a longer oil change period. It is also recommended for any direct injection petrol
engine, or diesel engines with diesel particulate filters in their exhaust systems. Its properties as a long life
performance levels mean that it can be used in vehicles that require ACEA C2.
•
compatible with this exhaust after-treatment system, preventing increased fuel consumption and the
loss of engine properties caused by ash accumulating in the filter.
• Internal tests conducted in Audi and VW petrol and diesel engines ensure maximum performance of
this lubricant in the entire range of Euro 5 and previous vehicles by this manufacturer.
• Low lubricant consumption as it is formulated using high quality synthetic bases.
• Long life product that can considerably extend oil change intervals up to 50,000 km according to
vehicle manufacturer recommendations.
• VW 507.00/504.00
• MB 229.51
UNIT METHOD VALUE
SAE GRADE 5W30
Density at 15 ºC
Viscosity at 100 ºC cSt ASTM D 445 12.1
Viscosity at 40 ºC
Viscosity at -30 ºC cP ASTM D 5293 6600 max.
Viscosity index
Flash point, open cup ºC ASTM D 92 180 min.
Pour point ºC ASTM D 97 -42
T.B.N. mg KOH/g ASTM D 2896 6.0
Viscosity at 100 ºC after shearing
Noack volatility, 1hr at 250 ºC % weight CEC-L-40-93 10 max.
HTHS, Viscosity at 150 ºC
The above mentioned characteristics are typical values and should not be considered product specifications.
• ACEA C3
• PORSCHE C30
g/mL ASTM D 4052 0.854
cSt ASTM D 445 73
- ASTM D 2270 155 min.
cSt CEC-L-14-93 9.3 min.
cP CEC-L-36-90 >3.5
• API SN
Revision 7. November 2017
Loading...