SMARTBOX Wi-Fi
PE - DERXPE007 EN 10/17
Installation Manual
• Connected via Ethernet to the router
• It requires no configuration
• No computer required
• Powered via a micro USB adapter
• It manages the data collected from the various devices
• Each home requires at least one Smartbox
connected
ENGLISH
CONTENTS
WARNINGS...........................................................................................................................................
page 3
INSTALLATION
..................................................................................................................................
page
4
SMARTBOX INSTALLATION
page
RESET SMARTBOX
2
System assembly
Radio range warnings.
...............................................................................................................
F. A . Q . (frequently asked questions)
.........................................................................................................................
page
5
6
......................................................................................................
page
7
.............................................................................................................................
page
8
SMARTBOX TECHNICAL SPECIFICATIONS
SIMPLIFIED EU DECLARATION OF CONFORMITY
.....................................................................................
page
8
..........................................................................
page
8
WARNINGS
The installation and electrical connection of the
devices and appliances must be implemented by
qualified personnel and in conformity with current
laws andregulations.
Ensure the product is intact once it is removed from its
packaging.
Packaging components (any plastic bags, PVC
suspensions, etc.) mustbe kept out of reach of children.
Carefully read the instruction manual before using the
product as it provides important guidelines regarding
safety, installation and use. The instruction manual must be
preserved with carefor future reference.
The is not intended for use by persons (includingSmartbox
children) with reduced physical, sensory or mental
capabilities, or by those with a lack of experience and
knowledge of the instructions, unless they are supervised or
have received the necessary instructions concerning use of
the device by a person responsible for their safety. Children
should be supervised to ensure that they do not play with
the device.
If necessary, clean the with a slightlydamp cloth.Smartbox
Important: for the system modes and operation
of the WIFI temperature control system and for
correct installation, also see the specific
manual of the and ofprogrammable thermostat
the APP.
Radio frequency waves emitted by the
wireless are not a risk to humanSmartbox
or animal health.
Important: the manufacturer reserves the
right to introduce any technical and/or
constructive changes deemed necessary,
with no prior notice.
DISPOSAL OF ELECTRICAL& ELECTRONIC EQUIPMENT
This symbol onthe product or itspackaging to indicates that thisproduct shall notbe treated as household waste.
Instead, it shallbe handed over tothe applicable collection point forthe recycling of electricaland electronic equipment,such as for example:
- sales points,in case you buya new and similar product;
- local collectionpoints (waste collection centre,local recycling center,etc...).
By ensuring this productis disposedof correctly, you will help prevent potential negativeconsequence forthe environmentand humanhealth,
which could otherwisebe caused by inappropriatewaste handing of this product.
The recyclingof materials willhelp to conservenatural resources.For more detailed information about recyclingof this product,please contact
your local cityoffice, your house holdwaste disposal service or theshop where youpurchased the product.
3
INSTALLATION
System assembly
86 MHz9,525
86 MHz9,525
INTERNET
ROUTER
SMARTBOX
4
** ENERGY METER WiFi
*WI-FI PROGRAMMABLE THERMOSTAT
*EXPANDABLE (up to 30 devices):
the dwelling can be divided into several thermal zones by adding other
programmable thermostats (even in homes with distribution manifolds).
(optional)
it is possible to add n° 01 **Energy meter (optional).
5
DENSE VEGETATION
trees, hedges, shrubs, etc.
radio range reduction of 10%÷25%
WOOD OR
PLASTERBOARD WALLS
radio range reduction of 10%÷30%
BRICK OR STONE WALLS
radio range reduction of 40%÷60%
CONCRETE WALLS
radio range reduction of 50%÷70%
METAL WALLS and/or FLOORS
radio range reduction of 65%÷90%
During installation, some precautions must be taken in order not to limit or, in some cases, inhibit the range of the radio waves
between Smartbox and , in particular:i dispositivi connessi
- install theappliance away from metal furniture or structures which could alter or screen propagation of radio signals;
- make sure that there are no electrical or electronic devices (television, microwave oven, etc.) within a range of at least 1 m
from the appliance;
-
if possible, installthe device in a central position;
if the apartmentis made up of several floors, install the device on a middle floor.
Note: if there are no obstacles between the Programmable thermostat and Smartbox, the “open air” range is approximately
200 m; indoorswith the presence of walls, the range is approximately 30m (see “technical data”).
Radio range decreases significantly when the
components are interposed between the obstacles.
This attenuation varies in different degrees
depending on the type of material the walls or
barriers to crossare made of.
The presence of noise or electromagnetic
interference sources can also reduce the indicated
radio range.
Below are some examples of mitigation related to
materials, which impact on the "Free air" range
declared above.
INSTALLATION
Radio range warnings
3. Control of LEDs
Normal: orange light on, alternating with green light
every 5 seconds; otherwise seeFAQ on nextpage.
1. Connect the Smartbox to the router
with the Ethernet cable
2. Connect power by means of the
micro USB adapter
5. Access your account to configure the local data and to allow for the automatic
detection of the Smartbox. Follow the instructions on the APP.
SMARTBOX INSTALLATION
micro USB
1
Ethernet
2
4. Register via APP (see procedure in APP manual)
3
LED
6
F. A . Q .
(frequently asked questions)
1) The Smartbox does not connect.
Check that theunit is poweredand correctlyconnected to therouter of theuser by meansof theEthernet cable, without proxyand with 123UDP,
5000 TCP and 5001TCPports open. TheDHCPprotocol must beenabled on therouter.
.
The LEDs on the Smartboxindicate:
·Green light off, orange light flashing onceeach second:
Smartbox in discovery mode to find newdevices to connect.
.
·Orange light on steady, green light flashing quickly:
IP not assigned to Smartbox.In this case switch the Smartbox off and back on by unplugging it and plugging it back in.
.
·Orange light on steady, green light flashing onceevery 5 seconds:
Smartbox with IPassigned but no communicationwith server.
.
·Orange light on alternated with green lightevery 5 seconds:
Smartbox with IPassigned and correctly connectedto the server.
2) The programmable thermostat does not connect to the Smartbox:
Make sure that the device is associatedto the Smartbox, checkthat the association and connection symbol
appear on the LCD display of the programmable thermostat. If not (no radio signal symbol viewed), proceed with the
association process as indicated in the specificinstallation manual of theprogrammable thermostat.
If the symbol appears on the programmable thermostat display, it means that the device is associated but is not
able to connect to the Smartbox.
Check that the Smartbox is switched on properly and that there are no obstacles which can limit the RF radio signal.
Note: check that the distance between the 2 devices insidethe home or room does not exceed 30 m and that thereare
no obstacles, objects or particular walls thatdecrease the radio range(see programmable thermostat installation).
If the problem persists, reset the programmablethermostat and remove itfrom theAPP.
Repeat the association of the programmable thermostatto the Smartbox.
7
Smartbox technical specifications
•External supply voltage: 5V 350 mA
•Micro USB adapter (included)
•Consumption 300mA
•RJ45 connector for Ethernet connections
•Ethernet cable 0.5 m (included)
•LED status indicator
•Radio emission: the appliance intentionally
emits radio waves at a frequency of 869,525 MHz,
with a max. power 0.75mW e.r.p.
•Dimensions:
L = 102mm; P = 76mm; H = 35mm
EU SIMPLIFIED CONFORMITY DECLARATION
The manufacturer declares that the type of radio equipment
listed below complies with Directive 2014/53/EU (RED).
The full text of the EU Declaration of Conformity is available at
the following Internet address:
http://www.perry.it/it/dichiarazioni.aspx
35
102
76
RESET SMARTBOX
20
Press the smartbox key for 20 seconds
F. A . Q .
(Frequently Asked Questions and Inconsistent Resolutions)
consult the FAQ on page:
or else access it using the QR code:
http://perry.it/it/prodotto/1tx-rx01wifi.aspx
Via Milanese, 11
22070 VENIANO (Como) - ITALY
Tel. +39 031.8944.1 Fax +39 031.931848
PERRY ELECTRIC S.r.l.
www.perry.it
Manufacturer, Fabricat , Fabbricante, Fabricante:, Fabrikant
Type , Tipo:, Typen
1TXRX01WIFI V002
Loading...