Permasteel PS-200 User Manual

Owner's Manual

CONTACT US

Questions? Need parts?

We are here to help!

Permasteel Customer Service

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Monday-Friday

8:00am-5:00pm (Pacific Standard Time)

Owner's Manual

STEEL 80QT COOLER

MODEL#PS-200

ASSEMBLY INSTRUCTIONS:

TOOLS REQUIRED:
#2 Phillips screwdriver
Allen wrench

Please read the cooler manual carefully and assemble according to following steps

.

TOOLS REQUIRED

#2 Philips screwdriver

ASSEMBLY INSTRUCTIONS

1. Please make sure all parts are accounted for before beginning assembly

2. Insert handle (part G) to left Leg (part C), tighten with 2 screws (part L) each (shown in Fig.1 insert), Repeat
the same step with right side (parts B&F).

3. Attach left leg assembly (parts C+G) to the main basin (partA); using4pcs truss screws (part K) as shown in
Fig. 1. Repeat same step for right leg assembly (parts B+F)

4. Attach 2 casters with brake (part E) on left leg assembly by screwing into leg insert, attach 2 casters (part D)
to right leg assembly

5. Attach bottle-cap catcher (H) to main basin by sliding it down over pre-installed bolts,

6. Attach bottle opener (I) to main basin using 2pc screws as shown in Fig. 2 insert

7.

Clean inside of coolercompletely with soft dry towel your cooler is now ready for use.