Perlick Draft Arm, Panther Tower, Lucky Tower, Tee Tower Installation Instructions Manual
Installation
Instructions
Dispensing Towers
Draft Arm, Lucky, Panther or Tee Towers
Draft Arm
Panther Tower
Lucky Tower
Tee Tower
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
Form No. Z2351
Rev. 04.17.19
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
TABLE OF CONTENTS
Beer and Wine Kits ............................................................................................................................................................................... 3
Tools and Materials Required ......................................................................................................................................................... 3
Dispensing Kit Component Parts .................................................................................................................................................. 3
Air Scoops for Field Retrot Kits ................................................................................................................................................... 7
General Installation and Field Retrot Installation ............................................................................................................. 8
Safety Information ............................................................................................................................................................................... 8
About Wine Dispensing ..................................................................................................................................................................... 8
Air Distributor and Air Scoop Installation - Field Retrot Instructions ...................................................................... 9
Air Tubing to Air Scoop Attachment ............................................................................................................................................ 9
Air Distributor Assembly Attachment to Cabinet .................................................................................................................... 9
Draft Arm and Tee Tower Instructions ..................................................................................................................................... 10
Draft Arm Preparation .................................................................................................................................................................... 10
Tee Tower Preparation .................................................................................................................................................................... 10
Mounting Draft Arms or Tee Towers to a Cabinet Top ........................................................................................................ 10
Mounting Draft Arms or Tee Towers to a Counter Top ....................................................................................................... 11
Attaching Faucets to Draft Arms or Tee Towers .................................................................................................................... 11
Mounting the Beer/Wine Drainer to a Cabinet Top ............................................................................................................. 11
Mounting the Beer/Wine Drainer to a Counter Top ............................................................................................................ 12
Running the Air Scoop Tubing to the Draft Arms or Tee Towers .................................................................................... 12
Attaching the Beer Line to the Draft Arms or Tee Towers ................................................................................................. 13
Attaching the Wine Line to Draft Arms or Tee, Lucky or Panther Towers .................................................................... 13
Attaching the Gas Line Tubing ................................................................................................................................................... 14
Attaching the Tapping Hole Covers .......................................................................................................................................... 14
Attaching the Air Distributor Cover ........................................................................................................................................... 14
Checking the System for Leaks ................................................................................................................................................... 14
Lucky and Panther Tower Instructions ................................................................................................................................... 15
Lucky and Panther Tower Preparation ..................................................................................................................................... 15
Mounting Lucky or Panther Towers to a Cabinet Top ......................................................................................................... 15
Mounting Lucky or Panther Towers to a Counter Top ........................................................................................................ 15
Attaching Faucets to Lucky or Panther Towers ..................................................................................................................... 15
Mounting the Beer/Wine Drainer to a Cabinet Top ............................................................................................................ 16
Mounting the Beer/Wine Drainer to a Counter Top ............................................................................................................ 17
Running the Air Scoop Tubing to the Lucky or Panther Towers ..................................................................................... 17
Attaching the Beer Line to the Lucky or Panther Towers .................................................................................................. 18
Attaching the Gas Line Tubing .................................................................................................................................................... 18
Attaching the Tapping Hole Covers .......................................................................................................................................... 18
Attaching the Air Distributor Cover .......................................................................................................................................... 19
Checking the System for Leaks ................................................................................................................................................... 19
Appendix ............................................................................................................................................................................................... 20
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
2
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
Please follow these instructions to ensure proper installation of Perlick beer and wine dispensing towers. These
instructions cover 3” Draft Arms and Tee, Lucky and Panther Towers. These instructions apply to the following beer and
wine dispensing kits:
Beer Kits
69526-1DA 69526-1DATF 69526-2DA 69526-2DATF 69526-3DA 69526-3DATF
69526-2TT 69526-2TTTF 69526-3TT 69526-3TTTF 69526-4TT 69526-4TTTF
69526-5TT 69526-5TTTF 69526-6TT 69526-6TTTF 69526-2N 69526-2NTF
69526-1L 69526-1LG 69526-2L 69526-2LG 69526-3P 69526-3PG
67945-2DA 67945-2TT 67945-4TT 67945-2L
Wine Kits
69526W-1DA 69526W-2DA 69526W-3DA 69526W-2TT 69526W-3TT
69526W-4TT 69526W-5TT 69526W-1L 69526W-2L 69526W-3P
67945W-2DA 67945W-2TT 67945W-4TT 67945W-2L
For eld installation, add a –R to the factory kit part number.
Note: Each kit contains enough hardware to install up to six product lines. Depending on how many lines you are
installing, you may have parts left over after the installation is complete.
Tools and Materials Required
- Safety glasses
- Rubber gloves
- Utility knife or vinyl tubing cutter
- Slotted screwdriver
- 1/4” nut driver (optional)
- 6” or 8” adjustable wrench
- Cordless drill driver
- 5/16” socket head driver bit
Dispensing Kit Component Parts
- Draft Arm, Tee Tower, Lucky or Panther Tower
Draft Arm Tee Tower Lucky (shown)
or Panther Tower
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
3
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
Dispensing Kit Component Parts, Continued
- Air Distributor Cover 68678-1
- DZS36 Air Distributor Cover 68779-1
- Gas/CO2 Tubing C23975-1
- Beer Line Connector 532
- Wine Line Connector 67750
- Anti-Microbial Drain Tubing 1390D
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
4
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
Dispensing Kit Component Parts, Continued
- Faucet Head Assembly 408X
- Stainless Steel Wine Faucet Head 408XSS
- Silicone Sealant C15997
- Drain Pan C18640A
- DZS36 Drip Tray 68819
- Waste Bottle - Wine C24392-1
- Waste Bottle Holder - Wine 68693-1
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
5
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
Dispensing Kit Component Parts, Continued
- Tapping Parts Kit 67305
- Tapping Parts Kit - Wine 67305W
- PVC Pipe 67562
- Parts Bag 67835
- Stainless Steel Wine Keg Coupler 67747
- Tapping Cover 67852-1
- Gasket 57355-1
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
6
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
Air Scoops for Field Retrot Kits (-R) only - see page 9.
- Air Scoop 69315-1
For BBR/BBRN/PTR
- Air Scoop 68686-2
For DZS60
- Air Scoop 68778-1
For PTS
- Air Scoop 68685-1
For BBS/BBSN
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
7
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
General Installation and Field Retrot Installation
Cabinets ordered with a dispensing kit from the factory will already have the air distributor and air scoop installed.
If you are doing a eld retrot on a previously installed cabinet, your kit also will include an air distributor and an air
scoop. Please refer to the Air Distributor and Air Scoop Installation - Field Retrot Instructions section on the following
page to install these components. Note that eld retrot kits will have a “-R” at the end of the kit model number.
Beer/Wine System Safety
WARNING - Any compressed gas such as CO2 can be dangerous! It is important that reputable
companies are used to supply and install systems and to thoroughly train all sta who will use
the system.
NEVER Connect a pressurized gas cylinder unless there are at least two safety mechanisms in the pressure system.
At least one at the regulator and one at the product container coupler.
NEVER Connect a pressurized gas cylinder directly to a keg.
NEVER Connect your own equipment to the pressure system.
ALWAYS Report any damage or leaks and have them repaired immediately.
ALWAYS Store gas cylinders in the upright position.
ALWAYS Ventilate after a gas leak.
ALWAYS Keep gas cylinders away from heat and preferably stored in a cooler part of the establishment.
ALWAYS Thoroughly train all sta who use the equipment.
About Wine Dispensing
Perlick oers the industry’s most complete line of commercial refrigerated wine storage
and serving equipment. Perlick’s WINEcertied family of products, specied in the
Dispensing Kit Component Parts section of this document, are manufactured specically
to properly store and dispense wine.
Wine components include a sanitary 304 stainless steel faucet, shank, union and keg
coupler with a sanitary 304 stainless steel probe, as well as avor-lock tubing, all to
protect the delicate avors of wines.
To preserve the integrity of Perlick WINEcertied wine products and systems, DO NOT use beer kit components
in wine systems.
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
8
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
AIR DISTRIBUTOR AND AIR SCOOP INSTALLATION - FIELD RETROFIT INSTRUCTIONS
Air Tubing to Air Scoop Attachment
1. Select the appropriate air scoop for the cabinet model being
retrotted. Air scoop photos with the cabinet models they apply to are
shown on page 7.
2. Knock out the desired slug from the air scoop and insert the 1” snap
bushing.
2 2
3. Secure the air tube in place by attaching a cable tie on each side of
the snap ring.
4. Mount the air scoop assembly against the air discharge plenum of
the evaporator.
5. Please refer to Diagram 5 in the Appendix for a drawing of the air
scoop used on the BBS, BBSN, and PTS Models.
3
PTS Series
Air Distributor Assembly Attachment to Cabinet
3
DZS60
BBS/BBSN BBR/BBRN/PTR
1
1. Place the air distributor cover bracket behind the air
distributor assembly and mount it to the desired location on
the cabinet wall. (Two-line assembly shown.)
1
9
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
Loading...