Perlick HP48RBS3L3R, HP24CS3R, HP48FRS55, HP48RWS3L3R Maintance Manual

Use and Care Guide

Signature Series

C-Series

ADA-Compliant Series

Shallow-Depth Series

(excludes Beer Dispenser Models)

18” Shallow-Depth Series Beverage Center/48” Signature Series Refrigerator / Wine Reserve stacked on a 48” Signature Series Freezer / Refrigerator Drawers

Form No. 1322013

Use and Care Guide

TABLE OF CONTENTS

General Information .................................................................................................................................2

Safety ......................................................................................................................................................3

Operation .................................................................................................................................................3

Seasonal Maintenance ............................................................................................................................6

Maintenance ............................................................................................................................................7

Troubleshooting .......................................................................................................................................9

Warranty ................................................................................................................................................11

GENERAL INFORMATION

Introduction

Congratulations on your purchase of a Perlick residential refrigeration product. Perlick’s product offering gives you the opportunity to enjoy functionality and user friendliness in just about any room of your home, including kitchens, bedrooms, entertainment rooms, basements and even bathrooms. All Perlick products are built with commercial grade stainless steel, providing you with beauty and durability for a lifetime of use.

This Use and Care Guide will answer your questions about the features, operation and maintenance of your Perlick unit. We dedicate considerable time to ensure that our products provide the highest level of customer satisfaction. If, however, service is required, call Perlick at 1-800-558-5592. For your own protection, never return merchandise for credit without our approval

We thank you for selecting a Perlick product.

Warranty

The package containing this manual also includes warranty registration information. Warranty coverage begins on the date your Perlick unit was originally purchased.

Take a moment to read through the included warranty statement and complete and mail the Warranty Registration Card as soon as possible to validate the registration date. Alternatively, you can complete Warranty Registration online at www.perlick.com/residential. Mouse over

“Service,” and then select “Warranty Registration” from the menu.

You must register your product within 90 days of purchase to receive the Full Three Year Warranty. Without registration, you will

receive the standard Full Two Year Warranty with the additional Third through Sixth Year Limited Parts Only Warranty.

If you do not complete the Warranty Registration online or return it via U.S. mail, Perlick will use the date of sale as the ﬁ rst date of warranty for the unit. Please record the purchase date and the dealer’s name, address and telephone number below.

Model Number: ________________________ Serial Number: _________________________ Purchase Date: ________________________ Dealer Name & Address: ______________________________________ ______________________________________ ______________________________________ Phone Number: __________________________

PLEASE READ all instructions completely before attempting to install or operate the unit. Take particular note of the DANGER, WARNING and CAUTION information in the manual. The information is important for the safe and efﬁ cient installation, operation and care of your Perlick unit.

IMPORTANT!

Read and understand all information in this manual before attempting installation.

All plumbing and electrical work must be performed by a qualiﬁ ed technician and

conform to all applicable state and local codes.

Printed in USA 2 0213

Use and Care Guide

SAFETY

DANGER

death if precautions are not followed.

WARNING

death if precautions are not followed.

Indicates a hazard that WILL result in serious injury or

Indicates a hazard MAY cause serious injury or

OPERATION

Loading Product

Before storing perishables, turn unit on and allow it to operate for a minimum of 24 hours to allow temperatures to stabilize.

When loading items into the unit, do not block internal louvers and fan guard openings or performance will be decreased.

Checking Product Temperature

1. T o accurately check the temperature of product stored in the refrigerated compartment, insert an accurate thermometer into a plastic unbreakable bottle, partially ﬁ lled with water. Tighten bottle cap securely.

2. Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24 hours, check the temperature of the water. Adjust the temperature accordingly using the procedures on this page.

CAUTION

damage may occur if precautions are not followed.

This is located on the back wall of the unit to the left of the light; in the Signature Series, it is in front on the control cradle.

Always ensure that the manual light switch is in the OFF position before closing a solid wood or stainless steel door. If manual light switch is left on for an extended period of time, it may increase the cabinet temperature, especially in the top compartment, and cause the refrigeration system to run harder.

Indicates a hazard where minor injury or product

Master Power Switch

Dual Zone products come equipped with a master power switch located behind the louvered toe kick. Remove the toe kick to turn power on or off

to the unit.

Digital Temperature Control (Signature Series – 24” Dual-Zone)

The unit is preset to achieve the recommended temperature range when installed in a location with a 70° ambient room temperature. The following factors affect the internal temperature of the unit:

• Temperature setting

• Room temperature where installed

• Number of times the door is opened and closed

• Length of time door is left open

• Style of door installed

• Door gasket seal and condition

• Amount of time the internal light is illuminated

• Installation in direct sunlight or near a heat source

Interior Light

The unit is equipped with an interior light that illuminates when the door is opened. The cabinet also comes equipped with a manual light switch for displaying the products through a glass door.

SET

Figure 1. Digital Temperature Controller

Upper Compartment: To view the upper compartment temperature, press and release the DEFROST button (melting snowﬂ ake).

Lower Compartment: Display reading always shows the lower compartment temperature.

Setpoint Display

Press and release the SET button; display will read St1. Press SET again and the LOWER Compartment setpoint will be displayed.

Press SET again; the display will read St2. Press SET again and the UPPER Compartment

Printed in USA 3 0213

Use and Care Guide

temperature will be displayed.

Changing the Lower Compartment Temperature

1. Press and hold the SET button until the display shows St1 with “F” ﬂ ashing.

2. Press SET again to display the lower compartment’s current temperature (“F” will continue to ﬂ ash).

3. Use the UP or DOWN arrow button to scroll to the desired temperature. The controller will memorize the new temperature.

Changing the Upper Compartment Temperature

1. Press and hold the SET button until the display shows St1 with “F” ﬂ ashing. Press the DOWN arrow button once; the display will read St2.

2. Press SET again to display the upper compartment’s current temperature (“F” will continue to ﬂ ash).

3. Use the UP or DOWN arrow key to scroll to the desired temperature. The controller will memorize the new temperature.

NOTE: Dependent on the model and conﬁ guration, the controllers have been programmed to only allow a temperature adjustment within a speciﬁ ed range. See the chart below for the speciﬁ ed range allowed for your unit.

Signature Series – Dual-Zone Units

Model Factory

Temperature

Setpoint

Lower/Upper

HP24Z 0°F / 38°F -10° - 10° / 30° - 42° HP24C 38°F / 55°F 30° - 42° / 40 -68° HP24D 55°F / 65°F 40° - 68° / 40° - 68°

Range

Dual Zone Temperature Scale

To change F to C, press and hold the down arrow for 3 seconds.

Digital Temperature Control (Signature Series – 15”, 24” & 48” Single Zone)

C F

SET

Figure 2. Digital Temperature Controller

To Set Target Temperature

SET

will show the current temperature setpoint.

To Change Setpoint Temperature

1. Press and hold the SET button until the display shows the current setpoint temperature with “F” ﬂ ashing.

2. Use the UP or DOWN arrow button to scroll to the desired temperature. The controller will memorize the new setpoint temperature.

To Start A Manual Defrost (Freezers Only)

To Set Maximum Stored Temperature

maximum stored temperature, while displayed, press and hold the SET button until ‘rst’ ﬂ ashes in the display.

To Set Minimum Stored Temperature

minimum stored temperature, while displayed, press and hold the SET button until ‘rst’ ﬂ ashes in the display.

Press and release the SET button. Display

Press the defrost button.

Press the UP arrow button to see the maximum stored temperature. T o reset the

Press the DOWN arrow button to see the minimum stored temperature. T o reset the

On/Off

Press to turn the unit on or off.

Printed in USA 4 0213

+ 8 hidden pages