Perlick HC24-18 Installation Manual

STACKING KIT INSTALLATION

IMPORTANT

For built-in applications only!

Tools Required

Drill

Ensure the anti-tip brackets are installed

per the installation and operating
manual that came with the cabinet.

Never install if used with caster kits or

extended leg kits.

Parts Required

Part Number Description HP15

63965 LATCH STRIKE 2 2 2 4 6
65700-2 15" Grille 1
65733-4 24" Grille 1 1 2 3

68094-15 15" Mounting Plate 1
68094-24 24" Mounting Plate 1

68094-24x18 24"x18" Mounting Plate 1

68094-48 48" Mounting Plate 1
68094-72 72" Mounting Plate 1

C31323 Bumper, Adhesive Poly 4 4 4 8 12

M00885-189

M50050-466

1/4-20 X 1/2" MACHINE

SCREW

#10 X 1/2" SHEET METAL

SCREW

4 4 4 6 6

2 2 2 5 5

HP24 &

HC24

Phillips
Screwdriver

MODEL

HH24 &

HC24-18

5/32" Drill Bit

HP48 HP72

1/4-20 X 1/2" MACHINE SCREW

#10 X 1/2" SHEET METAL SCREW

15" & 24" Mounting Plate

8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: [phone] Fax: [phone] perlick.com

Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning

BUMPER, ADHESIVE POLY

LATCH STRIKE

48" & 72" Mounting Plate

-1-

Grille

95010 REV C

STACKING KIT INSTALLATION

These cabinets are extremely heavy. Ensure that you have

enough people on hand to help in repositioning of the unitsCAUTION:

so that it can be done safely and without damage.

Step 1: Drill out top row of rivets along back of the bottom cabinet

using 5/32" drill bit.

2 rivets on 24 and 15
inch wide cabinets.

Back View

5 rivets on 48 and 72
inch wide cabinets.

Back View

Step 2: Lay upper cabinet on its back and remove leg levelers and

grille(s) from unit.

Remove 2 additional
leg levelers from

Remove 4 leg
levelers from all
sizes of upper units.

8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: [phone] Fax: [phone] perlick.com

Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning

48 and 72 units.

-2-

95010 REV C