Perlick 4410 Installation Manual
Installation Sheet
DIRECT BURY FOUNTAIN ADAPTER
For Use On 4400, 4410, 4420, & 4430 Model Fountains
Installer
T o assure you install this model easily and correctly , PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE ST ARTING THE INST ALLA TION. CHECK YOUR INST ALLATION FOR COMPLIANCE WITH PLUMBING , ELECTRICAL AND OTHER APPLICABLE CODES.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SER VICE PERSON
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. T O WA TER LINES IS
A COMMON PROCEDURE. THIS GROUNDING MA Y BE IN THE BUILDING OR MA Y OCCUR A WA Y FROM THE
BUILDING . THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNT AIN, CREA TING AN ELECTROL YSIS WHICH CAUSES A MET ALLIC T ASTE OR AN INCREASE IN THE MET AL CONTENT OF THE WA TER. THIS
CONDITION IS A VOIDABLE BY USING THE PROPER MA TERIALS AS INDICA TED. ANY DRAIN FITTINGS PROVIDED
BY THE INST ALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALL Y ISOLA TE THE FOUNT AIN FROM THE
BUILDING PLUMBING SYSTEM.
P AGE 1 97864C (Rev. B - 07/06)
P ARTS LIST
4400 Direct Bury Fountain Adapter
ITEM NO.
1
2
3
4
5
6
P AR T NO.
45835C
75618C
75616C
70204C
75611C
70421C
DESCRIPTION
Adapter - Direct Bury Fountain
Rod - 3/4" Dia.
Nut - 3/4" - 10UNC-2B Hex.
Bolt - 3/8"-16UNC-2A Hex. Hd.
Washer - 3/8" Lock
Washer - 3/8" Plain
INST ALLATION INSTRUCTIONS
1. Thread Nuts (Item 3) onto Rods (Item 2)(one Nut per Rod).
2. Thread Rods into Adapter Cylinder (Item 1) and tighten Nuts
against Cylinder Securely .
3. Place Washers (Item 6) on Bolts (Item 4)(one Washer per
Bolt), Assemble Bolt s into Adapter Flange. Thread Bolts
all the way in.
4. Secure Adapter into Concrete Forms as per S tandard
Practice and as Shown Below. Be sure to Align Adapter
for proper location of Water Inlet Line, Drain Line, and
required Fountain Alignment.
5. Af ter Sufficient Cure of Concrete, remove Flange Bolts and
Washers.
6. Mount Fountain Assembly per Instructions Supplied with
Fountain and Items 4, 5, & 6 (See Below).
FINISHED GRADE
FOUNT AIN BODY
4, 5, 6
2, 3
CONCRETE
PRINTED IN U.S.A.
97864C (Rev. B - 07/06)
1
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.260.6640
P AGE 2
Loading...