Performance Designed PL6390 User Manual

Thank you for purchasing the Game Stop wireless controller for the PLAYSTATION 3
video game system.

Contents:
1 Wireless Controller for PS3
1 USB Dongle (found attached to the controller)
1 USB Cable
1 Manual

Set up:

1) Remove the USB receiver that is attached to the bottom of the controller and plug it

into one of the free ports of your PLAYSTATION 3

2) USB receiver LED will flash rapidly while looking for positive connection with the

controller. USB receiver light will light up solid when the connection is established

3) Place the power switch is in “ON” position

4) Press the “HOME” button, the controller will be automatically assigned a player

number. (you can change the controller player number by pressing and holding the
HOME button and then changing the player number from the PS3 menu – refer to
your console manual for more information

5) The battery of the controller is low when its LED start flashing.

Power Save Mode:

Controller will go into Power Save Mode after 3 (three) minutes of inactivity. You need
to press the START button to turn it back to the ACTIVE mode

Important Notice

1. Recommended us er age range 14+.

2. Adult supervision is necessary when controller is used by child

CAUTION:

Changes or modifications to thi s e quipment not expressly approved by the manufacturer
could void the users author ity to operate the equipment.

This equipment has been tested an d f o un d t o comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provi de
reasonable protecti on against harmful interfe rence in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determ ine d by tur ning the equipm e nt of f and on, the
user is encouraged to try to correct th e interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separati on between the equipment and rec eiver.
—Connect the equipment into an outlet on a circuit differe nt from that to which the

receiver is connected.
—Consult the dealer or an experienced radio/TV technician f or h elp.

FCC ID for Controller: X5B-PL6390 FCC ID for Dongle: X5B-PL6390A
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled

environment and it also complies with Part 15 of the FCC RF Rules. This transmitter
must not be co-located or operating in conjuncti on wit h any othe r ante n na or transm itter.
Operation is subject to the following two conditions:
(1) this device may not cause harmf ul inte rference, and
(2) this device must accept any interference received, including interferen ce that may
cause undesired operatio n.

© 2010 Performance Designed Products LLC. All rights re served. PDP and
AFTERGLOW™ are trademarks of Performance Designed Products LLC. PlayStation
3® is a registered trademark of Sony Computer Entertainment, Inc. This product is not
designed, manufactured, sponsored or endorsed by Sony Computer Entertainment.

Please keep this information for future reference.