
4
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
MADE IN CHINA/
FABRIQUÉ EN CHINE/
HECHO EN CHINA
Model No.: 904-005T
FCC ID: X5B-904005T
IC: 8814A-904005T
Rating: 3VDC/5mA
WWW.PDP.COM
www.pdp.com/support
Model No.: 904-005R
FCC ID: X5B-904005R
IC: 8814A-904005R
Rating: 5VDC/20mA
904-005
WIRELESS KEYBOARD

FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
ǂ Reorient or relocate the receiving antenna.
ǂ Increase the separation between the equipment and receiver.
ǂ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
ǂ Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENT
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two
This device complies with Industry Canada licence-exempt RSSs. Operation is
conditions:
subject to the following two conditions: (1) this device may not cause
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
interference, and (2) this device must accept any interference, including
device.
interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux
deux conditions suivantes :
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais
appareils radio exempts de licence. L'exploitation est autorisée aux deux
fonctionnement de l'appareil.
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.