INS8335C User’s Manual V1.1
www.perfectron.com
Safety Information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add a
device.
Before connecting or removing signal cables from the motherboard, ensure that
all power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using,
contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your local distributor.
Operation safety
Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
Place the product on a stable surface.
If you encounter any technical problems with the product, contact your local
distributor
Statement
All rights reserved. No part of this publication may be reproduced in any form or
by any means, without prior written permission from the publisher.
All trademarks are the properties of the respective owners.
All product specifications are subject to change without prior notice
1
INS8335C User’s Manual V1.1
www.perfectron.com
Revision History
Revision Date
(dd.mm.yyyy)
Changes
Version 1.0 27.05.2013 Initial release
Version 1.1 18.09.2013 Add GPIO feature
Packing list
□ INS8335C Mini-ITX Industrial MB
□ 1 x I/O shield
□ 1 x SATA cable
□ 2 x COM ports cable w/o bracket
□ 1 x USB cable
□ CD (Driver+ user’s manual)
□ Optional Accessories
Cable Kit: LPT Cable
Thermal Kit: CPU cooler
Processor:
a. Intel® Core™ i7-3610QE Processor (6M Cache, 2.30 GHz), 45 W
b. Intel® Core™ i5-3610ME Processor (3M Cache, 2.70 GHz), 35W
c. Intel® Core™ i3-3120ME Processor (3M Cache, 2.40 GHz), 35W
d. Intel® Celeron® Processor 1020E (2M Cache, 2.20 GHz), 35W
If any of the above items is damaged or missing, please contact
your local distributor.
Ordering Information
Part Number Description
INS8335C-ET Mini-ITX Industrial MB Intel® 22nm Ivy Bridge
Processor (Mobile) (-20 to 70°C)
INS8335C-UT Mini-ITX Industrial MB Intel® 22nm Ivy Bridge
Processor (Mobile) (-40 to 85°C optional)
2
INS8335C User’s Manual V1.1
www.perfectron.com
Table of Contents
Safety Information ...................................................................................................... 1
Electrical safety ..................................................................................................................1
Operation safety ................................................................................................................1
Statement ..........................................................................................................................1
Revision History .......................................................................................................... 2
Packing list ................................................................................................................. 2
Ordering Information .................................................................................................. 2
Table of Contents ........................................................................................................ 3
Chapter 1: Product Information ................................................................................... 6
1.1 Block Diagram ..............................................................................................................6
1.2 Key Features .................................................................................................................7
1.3 Board Placement ..........................................................................................................9
1.4 Mechanical Drawings .................................................................................................. 10
Chapter 2: Jumpers and Connectors ........................................................................... 11
2.1 Onboard Connector List .............................................................................................. 11
2.2 Jumper Settings and pin assignment ........................................................................... 13
SYSFAN2: System FAN2........................................................................................................................ 13
JP9: SYSFAN2_VCC 3.3/5/12V selectable ............................................................................................ 13
JCASE1: Case Open Warning ............................................................................................................... 13
PCIEX1_1: PCI Express x1 .................................................................................................................... 14
PCI1: PCI .............................................................................................................................................. 15
MCARD1: mPCIE/mSATA ..................................................................................................................... 16
BAT1: RTC battery connector .............................................................................................................. 16
DEBUG: Debug card connector ........................................................................................................... 17
AMP1: 4ohm 3Watt Amplifier output pin header............................................................................... 17
AUDIO1: LINE‐OUT/LINE‐IN/MIC‐IN .................................................................................................... 17
MINI_MPCIE: Mini PCIE connector ..................................................................................................... 18
LAN2_USB34: USB3.0 port 3,4 and LAN connector 2 ......................................................................... 19
LAN1_USB12: USB3.0 port 0,1 and LAN connector 1 ......................................................................... 19
COM1: RS232/422/485 and 5/12V selectable .................................................................................... 20
JP5: COM1 +12V/+5V selection ........................................................................................................... 20
HDMI: HDMI connector ...................................................................................................................... 20
VGA+DVI: VGA+DVI connector ............................................................................................................ 21
KB_MS1: PS2 Key Board / Mouse ....................................................................................................... 21
ATX_20P: 20 pin ATX Power Input Connector ..................................................................................... 21
ATX12V1: 4 pin ATX Power Input Connector ....................................................................................... 22
LVDS: LVDS connector ......................................................................................................................... 22
JP4: LVDS_VCC 3.3/5/12V selectable .................................................................................................. 22
JBKL1: Inverter connector ................................................................................................................... 23
JP3: BL_EN Level SELECT ..................................................................................................................... 23
JP3: BL_ADJ MODE SELECT .................................................................................................................. 23
SYSFAN1: System FAN1........................................................................................................................ 23
CPUFAN: CPU FAN ............................................................................................................................... 24
3
INS8335C User’s Manual V1.1
www.perfectron.com
DIMMA1: DDR3 SO-DIMM connector ................................................................................................. 24
DIMMB1: DDR3 SO-DIMM connector ................................................................................................. 24
SIM_CARD: SIM CARD ......................................................................................................................... 24
MSATA_CARD: MSATA ......................................................................................................................... 25
PSON1: ATX/AT mode .......................................................................................................................... 25
COM5: RS232/422/485 and 5/12V selectable .................................................................................... 26
COM6: RS232/422/485 and 5/12V selectable .................................................................................... 26
COM4: RS232 ...................................................................................................................................... 26
COM3: RS232 port 5/12V selectable ................................................................................................... 26
JP7: COM3 +12V/+5V selection ........................................................................................................... 26
COM2: RS232 port 5/12V selectable ................................................................................................... 27
JP6: COM2 +12V/+5V selection ........................................................................................................... 27
LPT1: LPT port pin header ................................................................................................................... 27
MCARD_SEL1: mPCIE/Msata selectable .............................................................................................. 27
SATA1, SATA2: Serial ATA 3.0 Connector .............................................................................................. 27
SATA3, SATA4: Serial ATA 2.0 Connector .............................................................................................. 28
F_USB2: USB2.0 pin header ................................................................................................................ 28
F_USB1: USB2.0 pin header ................................................................................................................ 28
JCMOS1: RTC Reset ............................................................................................................................. 29
JP2: Flash Descriptor Security Overide/Intel ME Debug Mode ........................................................... 29
FP1: Front Panel 1 ............................................................................................................................... 29
AFP1: LINE‐OUT/MIC‐IN ...................................................................................................................... 29
SPDIF1: SPDIF OUT .............................................................................................................................. 29
FP3: LAN LED ....................................................................................................................................... 29
Chapter 3: AMI BIOS UTILITY ..................................................................................... 30
3.1 Starting ...................................................................................................................... 30
3.2 Navigation Keys .......................................................................................................... 30
3.3 Main Menu ................................................................................................................ 31
3.4 Advanced Menu ......................................................................................................... 32
3.4.1 ACPI Settings .............................................................................................................................. 33
3.4.2 CPU Configuration ...................................................................................................................... 34
3.4.3 SATA Configuration ..................................................................................................................... 36
3.4.4 Thermal Configuration ............................................................................................................... 37
3.4.4.1 Platform thermal configuration .......................................................................................... 37
3.4.5 Intel Rapid Start Technology ...................................................................................................... 38
3.4.6 Intel TXT(LT) Configuration ......................................................................................................... 39
3.4.7 PCH-FW Configuration ............................................................................................................... 39
3.4.8 Intel Anti-Theft Technology Configuration ................................................................................. 40
3.4.9 AMT Configuration ..................................................................................................................... 41
3.4.10 USB Configuration .................................................................................................................... 42
3.4.11 F81866 Super IO Configuration ................................................................................................ 43
3.4.12 F81866 H/W Monitor ............................................................................................................... 44
3.4.13 Serial Port Console Redirection ................................................................................................ 45
3.4.14 CPU PPM Configuration ........................................................................................................... 46
3.5 Chipset ....................................................................................................................... 47
3.5.1 PCH-IO Configuration ................................................................................................................. 47
3.5.1.1 USB Configuration .............................................................................................................. 49
3.5.1.2 PCH Azalia Configuration .................................................................................................... 50
3.5.2 System Agent (SA) Configuration ............................................................................................... 51
3.5.2.1 Graphics Configuration ....................................................................................................... 52
3.5.2.2 Memory Configuration ....................................................................................................... 53
3.6 Boot Setting ............................................................................................................... 54
4
INS8335C User’s Manual V1.1
www.perfectron.com
3.7 Security ...................................................................................................................... 55
3.8 Save and exit .............................................................................................................. 56
5
INS8335C User’s Manual V1.1
www.perfectron.com
Chapter 1: Product Information
1.1 Block Diagram
6
INS8335C User’s Manual V1.1
www.perfectron.com
1.2 Key Features
Processor & System
CPU Type
Intel® 22nm Ivy Bridge Processor (Mobile) socket
rPGA988
Core™ i7-3610QE 2.3 GHz (6M Cache, 45W)
Core™ i5-3610ME 2.7 GHz (3M Cache, 35W)
Core™ i3-3120ME 2.4 GHz (3M Cache, 35W)
Chipset
Intel® QM77
Memory Type
2 x 204-pin SO-DIMM up to 16 GB dual channel
DDR3 1333/1600 MHz, Non-ECC
BIOS
AMI® UEFI BIOS
Supoer I/O
F81866D
iAMT
iAMT 8.0
Watchdog
1-255 sec. or 1-255 min. software
programmable, can generate system reset
Expansion Slot
1 x PCI
1 x PCIe x1
2 x Mini PCIe (one co-lay mSATA)
1 x mSATA
Display
Chipset
Integrated GFX in Ivy Bridge processor
Onboard VGA
Yes, (Max. resolution 2048 x 1536)
LVDS
Dual channel 24-bit LVDS, Max. 1920 x 1200
Onboard DVI-D
Yes, (Max. resolution 2048 x 1536)
Onboard HDMI
Yes, (Max. resolution 1920 x 1200)
Independent Display
Capability
VGA, DVI-D, HDMI, LVDS
Audio
Codec
Realtek ALC892 High De nition Audio Codec
Ethernet
Chipset
1 x Intel® 82579LM & 1 x Intel® 82574L GbE
WOL
Yes
Boot from LAN
Yes
Rear I/O
VGA
1
DVI-D
1
HDMI
1
Ethernet
2 x RJ45
USB
4 x USB 3.0
Audio
Mic-in, Line-in, Line-out
COM Port
1x RS232/422/485 with 5V/12V selectable
PS/2
1 x keyboard, 1 x mouse
7
INS8335C User’s Manual V1.1
www.perfectron.com
Internal I/O
SATA
2 x SATAIII (6 Gb/s), 2 x SATAII (3 Gb/s)
LVDS
30-pin connector
USB
4 x USB 2.0 ports by pin header
COM
5 x COM ports
COM2~3 ports RS232 with 5V/12V selectable by pin
header
COM4 port supports RS232 by pin header
COM5~6 ports RS232/422/485 by pin header
DIO
16-bit (8 in/8 out)
Fan
1 x CPU fan, 2 x System fan
Parallel Port
2 x 13-pin header
SIM Card Holder
1
Mechanical and Environment
Form Factor
Mini-ITX Industrial MB
Power Type
ATX (20-pin + 4-pin)
Dimension
170 x 170 mm (6.7" x 6.7")
Operating Temp.
-20 to 70°C
Storage Temp.
-20 to 85°C
Relative Humidity
10% to 90%, non-condensing
*All specifications and photos are subject to change without notice.
8
INS8335C User’s Manual V1.1
www.perfectron.com
1.3 Board Placement
9
INS8335C User’s Manual V1.1
www.perfectron.com
1.4 Mechanical Drawings
10
INS8335C User’s Manual V1.1
www.perfectron.com
Chapter 2: Jumpers and Connectors
2.1 Onboard Connector List
Label
Function
SYSFAN2
System FAN2
JCASE1
Case Open Warning
PCIEX1_1
PCI Express x1
PCI1
PCI
MCARD1
mPCIE/MSATA
BAT1
RTC battery connector
DEBUG
Debug card connector
MINI_MPCIE
Mini PCIE connector
AMP1
4ohm 3Watt Amplifier output pin header
AUDIO1
LINE‐OUT/LINE‐IN/MIC‐IN
LAN2_USB34
USB3.0 port 3,4 and LAN connector 2
LAN1_USB12
USB3.0 port 0,1 and LAN connector 1
COM1
RS232/422/485 and 5/12V selectable
HDMI
HDMI
VGA+DVI
VGA+DVI
KB_MS1
PS2 Key Board / Mouse
ATX_20P
20 pin ATX Power Input Connector
ATX12V1
4 pin ATX Power Input Connector
LVDS
LVDS connector
JBKL1
Inverter connector
SYSFAN1
System FAN1
CPUFAN
CPU FAN
DIMMB1
DDR3 SO-DIMM connector
DIMMA1
DDR3 SO-DIMM connector
SIM_CARD
SIM CARD
MSATA_CARD
MSATA
PSON1
ATX/AT mode
JP9
SYSFAN2_VCC 3.3/5/12V selectable
COM5
RS232/422/485 and 5/12V selectable
COM6
RS232/422/485 and 5/12V selectable
COM4
RS232
COM3
RS232 port 5/12V selectable
COM2
RS232 port 5/12V selectable
JP7
COM3 +12V/+5V selection
JP6
COM2 +12V/+5V selection
LPT1
LPT port pin header
MCARD_SEL1
mPCIE/Msata selectable
SATA1
Serial ATA 3.0 Connector
SATA2
Serial ATA 3.0 Connector
SATA3
Serial ATA 2.0 Connector
SATA4
Serial ATA 2.0 Connector
11
INS8335C User’s Manual V1.1
www.perfectron.com
DIO1
Digital input/output pin header
DIO2
Digital input/output pin header
F_USB2
USB2.0 pin header
F_USB1
USB2.0 pin header
JCMOS1
RTC Reset
JP2
Flash Descriptor Security Overide/Intel ME Debug Mode
FP1
Front Panel 1
AFP1
INE‐OUT/MIC‐IN
SPDIF1
SPDIF OUT
FP3
LAN LED
JP5
COM1 +12V/+5V selection
JP3
BL_EN Level SELECT&BL_ADJ MODE SELECT
JP4
LVDS_VCC 3.3/5/12V selectable
12
INS8335C User’s Manual V1.1
www.perfectron.com
2.2 Jumper Settings and pin assignment
SYSFAN2: System FAN2
Pin
Definition
1
NC 2 SYSFAN2_VCC
3
GND
JP9: SYSFAN2_VCC 3.3/5/12V selectable
Jumper
Function description
Setting
1-2
+3.3V
3-4
+5V
5-6
+12V
Default setting is 1-2
JCASE1: Case Open Warning
Pin
Definition
1
CASE OPEN#
2
GND
13
INS8335C User’s Manual V1.1
www.perfectron.com
PCIEX1_1: PCI Express x1
Pin
Side B Connector
Side A Connector
1
+12V
NC
2
+12V
+12V
3
+12V
+12V
4
GND
GND
5
SMBUS CLOCK
NC 6 SMBUS DATA
NC 7 GND
NC 8 +3.3V
NC 9 NC
+3.3V
10
+3.3VAUX
+3.3V
11
WAKE#
PCIE RESET
Mechanical Key
12
NC
GND
13
GND
PCIE CLOCK+
14
PCIE TXP
PCIE CLOCK-
15
PCIE TXN
GND
16
GND
PCIE RXP
17
NC
PCIE RXN
18
GND
GND
14
INS8335C User’s Manual V1.1
www.perfectron.com
PCI1: PCI
Pin
Definition
Pin
Definition
Pin
Definition
Pin
Definition
A1
Pull down 4.7K to
GND
A32
AD16
B1
-12V
B32
AD17
A2
+12V
A33
+3.3
B2
GND
B33
CBE2#
A3
GND
A34
FRAME#
B3
GND
B34
GND
A4
GND
A35
GND
B4
NC
B35
IRDY#
A5
+5V
A36
TRDY#
B5
+5V
B36
+3.3V
A6
INTA#
A37
GND
B6
+5V
B37
DEVSEL#
A7
INTC#
A38
STOP#
B7
INTB#
B38
GND
A8
+5V
A39
+3.3V
B8
INTD#
B39
LOCK#
A9
GNT1#
A40
SMBUS
CLOCK
B9
NC
B40
PERR#
A10
+5V
A41
SMBUS DATA
B10
REQ1#
B41
+3.3V
A11
NC
A42
GND
B11
NC
B42
SERR#
A12
GND
A43
PAR
B12
GND
B43
+3.3V
A13
GND
A44
AD15
B13
GND
B44
CBE1#
A14
+3.3VAUX
A45
+3.3V
B14
CLOCK1
B45
AD14
A15
RESET#
A46
AD13
B15
GND
B46
GND
A16
+5V
A47
AD11
B16
CLOCK0
B47
AD12
A17
GNT0#
A48
GND
B17
GND
B48
AD10
A18
GND
A49
AD9
B18
REQ0#
B49
M66EN
A19
PCI_PME#
A50
Keyway
B19
+5V
B50
Keyway
A20
AD30
A51
Keyway
B20
AD31
B51
Keyway
A21
+3.3V
A52
CBE0#
B21
AD29
B52
AD8
A22
AD28
A53
+3.3V
B22
GND
B53
AD7
A23
AD26
A54
AD6
B23
AD27
B54
+3.3V
A24
GND
A55
AD4
B24
AD25
B55
AD5
A25
AD24
A56
GND
B25
+3.3V
B56
AD3
A26
AD20
A57
AD2
B26
CBE3#
B57
GND
A27
+3.3V
A58
AD0
B27
AD23
B58
AD1
A28
AD22
A59
+5V
B28
GND
B59
+5V
A29
AD20
A60
REQ64#
B29
AD21
B60
ACK64#
A30
GND
A61
+5V
B30
AD19
B61
+5V
A31
AD18
A62
+5V
B31
+3.3V
B62
+5V
15
INS8335C User’s Manual V1.1
www.perfectron.com
MCARD1: mPCIE/mSATA
Pin
Definition
Pin
Definition
1
-PCH_WAKE
2
+3.3V_MINI
3
NC 4 GND
5
NC 6 +1.5V_PCH
7
NC 8 GND
9
GND
10
UIM_DATA
11
CLK_PCIE_mCARDN
12
UIM_CLK
13
CLK_PCIE_mCARDP
14
UIM_RESET
15
GND
16
UIM_VPP
17
NC
18
GND
19
NC
20
-W_DISABLE1
21
GND
22
-RST_PCIE
23
mCARD_PERN0
24
+3.3V_MINI
25
mCARD_PERP0
26
GND
27
GND
28
+1.5V_PCH
29
GND
30
SMB_CLK
31
mCARD_PETN0
32
SMB_DATA
33
mCARD_PETP0
34
GND
35
GND
36
-USB_MINI
37
GND
38
+USB_MINI
39
+3.3V_MINI
40
GND
41
+3.3V_MINI
42
WWAN_LED#
43
NC
44
WLAN_LED#
45
NC
46
WPAN_LED#
47
NC
48
+1.5V_PCH
49
NC
50
GND
51
NC
52
+3.3V_MINI
BAT1: RTC battery connector
Pin
Definition
1
GND
2
+3.3V
16
INS8335C User’s Manual V1.1
www.perfectron.com
DEBUG: Debug card connector
Pin
Definition
1
33Mhz
2
RST#
3
LFRAME#
4
LAD3
5
LAD2
6
LAD1
7
LAD0
8
+3.3V
9
GND
10
GND
AMP1: 4ohm 3Watt Amplifier output pin header
Pin
Definition
1
SP_OUTL-
2
SP_OUTL+
3
SP_OUTR+
4
SP_OUTR-
AUDIO1: LINE‐OUT/LINE‐IN/MIC‐IN
Pin
Definition
1
LINE-IN
2
LINE-OUT
3
MIC-IN
17
INS8335C User’s Manual V1.1
www.perfectron.com
MINI_MPCIE: Mini PCIE connector
Pin
Definition
Pin
Definition
1
-PCH_WAKE
2
+3VDUAL
3
NC 4 GND
5
NC 6 +1.5V_PCH
7
-CLK_PCIE_MINI_REQ
8
NC 9 GND
10
NC
11
CLK_PCIE_MININ
12
NC
13
CLK_PCIE_MINIP
14
NC
15
GND
16
NC
17
NC
18
GND
19
NC
20
-W_DISABLE1
21
GND
22
-MINI_RST
23
PCIE_RXN_MINI
24
+3VDUAL
25
PCIE_RXP_MINI
26
GND
27
GND
28
+1.5V_PCH
29
GND
30
SMB_CLK
31
PCIE_TXN_MINI
32
SMB_DATA
33
PCIE_TXP_MINI
34
GND
35
GND
36
USB2_PN4
37
GND
38
USB2_PP4
39
+3VDUAL
40
GND
41
+3VDUAL
42
NC
43
GND
44
WLAN_LED1#
45
CL_CLK
46
WPAN_LED1#
47
CL_DATA
48
+1.5V_PCH
49
-CL_RST
50
GND
51
-W_DISABLE_BT
52
+3VDUAL
18
INS8335C User’s Manual V1.1
www.perfectron.com
LAN2_USB34: USB3.0 port 3,4 and LAN connector 2
Upper USB
Lower USB
LAN
Pin
Definition
Pin
Definition
Pin
Definition
1
USBV2
1
USBV3
1
LAN2_MDI0+
2
USBD2-
2
USBD3-
2
LAN2_MDI0-
3
USBD2+
3
USBD3+
3
LAN2_MDI1+
4
GND
4
GND
4
LAN2_MDI1-
5
USB3RN3
5
USB3RN4
5
LAN2_MDI2+
6
USB3RP3
6
USB3RP4
6
LAN2_MDI2-
7
GND
7
GND
7
LAN2_MDI3+
8
USB3TN3
8
USB3TN4
8
LAN2_MDI3-
9
USB3TP3
9
USB3TP4
LAN1_USB12: USB3.0 port 0,1 and LAN connector 1
Upper USB
Lower USB
LAN
Pin
Definition
Pin
Definition
Pin
Definition
1
USBV0
1
USBV1
1
LAN1_MDI0+
2
USBD0-
2
USBD1-
2
LAN1_MDI0-
3
USBD0+
3
USBD1+
3
LAN1_MDI1+
4
GND
4
GND
4
LAN1_MDI1-
5
USB3RN1
5
USB3RN2
5
LAN1_MDI2+
6
USB3RP1
6
USB3RP2
6
LAN1_MDI2-
7
GND
7
GND
7
LAN1_MDI3+
8
USB3TN1
8
USB3TN2
8
LAN1_MDI3-
9
USB3TP1
9
USB3TP2
19
INS8335C User’s Manual V1.1
www.perfectron.com
COM1: RS232/422/485 and 5/12V selectable
Pin
RS-232
RS-422
Half Duplex RS-485
1
COM1_DCD-
TX-
DATA-
2
COM1_SIN
RX+
NA 3 COM1_SOUT
TX+
DATA+
4
COM1_DTR-
RX-
NA 5 GND
GND
GND
6
COM1_DSR-
NA
NA 7 COM1_RTS-
NA
NA 8 COM1_CTS-
NA
NA
9
COM1P9SEL
(Define by JP5)
COM1P9SEL
(Define by JP5)
COM1P9SEL
(Define by JP5)
JP5: COM1 +12V/+5V selection
Pin
Definition
Pin
Definition
1
COM1_RI-
2
COM1P9SEL
3
+5V
4
COM1P9SEL
5
+12V
6
COM1P9SEL
HDMI: HDMI connector
Pin
Definition
Pin
Definition
1
HDMI_2P
11
GND
2
GND
12
HDMI_CLKN
3
HDMI_2N
13
NC 4 HDMI_1P
14
NC 5 GND
15
HDMI_CLK
6
HDMI_1N
16
HDMI_DAT
7
HDMI_0P
17
GND
8
GND
18
+5V
9
HDMI_0N
19
HDMI_DET
10
HDMI_CLKP
20
INS8335C User’s Manual V1.1
www.perfectron.com
VGA+DVI: VGA+DVI connector
VGA DVI
Pin Definition Pin Definition Pin Definition Pin Definition
1 RED 9 +5V 1 TMDS2- 13 NC
2 GREEN 10 GND 2 TMDS2+ 14 +5V
3 BLUE 11 NC 3 GND 15 GND
4 NC 12 DDC
DATA
4 NC 16 HOTPLUG_DETE
CT
5 GND 13 HSYNC 5 NC 17 TMDS06 GND 14 VSYNC 6 DDC_CLK 18 TMDS0+
7 GND 15 DDC
CLOCK
7 DDC_DATA 19 GND
8 GND 8 NC 20 NC
9 TMDS1- 21 NC
10 TMDS1+ 22 GND
11 GND 23 TMDSCLK+
12 NC 24 TMDSCLK-
KB_MS1: PS2 Key Board / Mouse
Pin Definition
1 MS
2 KB
ATX_20P: 20 pin ATX Power Input Connector
Pin Definition Pin Definition
1 +3.3V 11 +3.3V
2 +3.3V 12 -12V
3 GND 13 GND
4 +5V 14 PS_ON
5 GND 15 GND
6 +5V 16 GND
7 GND 17 GND
8 POWER OK 18 N/C
9 +5VSB 19 5V
10 +12V 20 5V
21
INS8335C User’s Manual V1.1
www.perfectron.com
ATX12V1: 4 pin ATX Power Input Connector
Pin
Definition
1
GND
2
GND
3
+12V
4
+12V
LVDS: LVDS connector
Pin
Definition
Pin
Definition
1
LVDS1_CLK+
2
GND
3
LVDS1_CLK-
4
LVDS0_D3+
5
GND
6
LVDS0_D3-
7
LVDS1_D3+
8
GND
9
LVDS1_D3-
10
LVDS0_CLK+
11
LVDS1_D2+
12
LVDS0_CLK-
13
LVDS1_D2-
14
GND
15
LVDS1_D1+
16
LVDS0_D2+
17
LVDS1_D1-
18
LVDS0_D2-
19
LVDS1_D0+
20
LVDS0_D1+
21
LVDS1_D0-
22
LVDS0_D1-
23
GND
24
LVDS0_D0+
25
LVDS0_DDC_SC
26
LVDS0_D0-
27
LVDS0_DDC_SD
28
GND
29
+VDD_LVDS (Define by
JP4)
30
+VDD_LVDS (Define by
JP4)
JP4: LVDS_VCC 3.3/5/12V selectable
Jumper
Function description
Setting
1-2
+5V
3-4
+3.3V
5-6
+12V
Default setting is 1-2
22
INS8335C User’s Manual V1.1
www.perfectron.com
JBKL1: Inverter connector
Pin
Definition
1
Backlight power (+12V)
2
Backlight power (+12V)
3
Backlight power (+12V)
4
+5V
5
+5V
6
GND
7
GND
8
Backlight_EN (Voltage level Select by JP3)
9
Backlight_ADJ (Voltage level Select by JP3)
10
GND
JP3: BL_EN Level SELECT
Jumper
Function description
Setting
5-3
5V
1-3
3.3V
Default setting is 1-3
JP3: BL_ADJ MODE SELECT
Jumper
Function description
Setting
2-4
PWM mode
6-4
DAC mode
Default setting is 2-4
SYSFAN1: System FAN1
Pin
Definition
1
SYSFAN1
2
SYSFAN_VCC
3
GND
23
INS8335C User’s Manual V1.1
www.perfectron.com
CPUFAN: CPU FAN
Pin
Definition
1
PWM_CPUFAN
2
TACH_CPUFAN
3
CPUFAN_VCC
4
GND
DIMMA1: DDR3 SO-DIMM connector
DIMMB1: DDR3 SO-DIMM connector
SIM_CARD: SIM CARD
Pin
Definition
Pin
Definition
1
VCC
4
GND
2
RST 5 VPP
3
CLK 6 DATA
24
INS8335C User’s Manual V1.1
www.perfectron.com
MSATA_CARD: MSATA
Pin
Definition
Pin
Definition
1
NC 2 +3.3V
3
NC 4 GND
5
NC 6 +1.5V_PCH
7
NC 8 NC 9 GND
10
NC
11
NC
12
NC
13
NC
14
NC
15
GND
16
NC
17
NC
18
GND
19
NC
20
NC
21
GND
22
NC
23
mSATA2_RXP_C
24
+3.3V
25
mSATA2_RXN_C
26
GND
27
GND
28
+1.5V_PCH
29
GND
30
NC
31
mSATA2_TXN_C
32
NC
33
mSATA2_TXP_C
34
GND
35
GND
36
NC
37
GND
38
NC
39
+3.3V
40
GND
41
+3.3V
42
NC
43
GND
44
NC
45
NC
46
NC
47
NC
48
+1.5V_PCH
49
NC
50
GND
51
NC
52
+3.3V
PSON1: ATX/AT mode
Jumper
Function description
Setting
2 - 3
ATX Mode
1 - 2
AT Mode
Default setting is 2-3
25
INS8335C User’s Manual V1.1
www.perfectron.com
COM5: RS232/422/485 and 5/12V selectable
Pin
RS-232
RS-422
Half Duplex RS-485
1
COM5_DCD-
TX-
DATA-
2
COM5_RXD
TX+
NA 3 COM5_TXD
RX+
DATA+
4
COM5_DTR-
RX-
NA 5 GND
GND
GND
6
COM5_DSR-
NA
NA 7 COM5_RTS-
NA
NA 8 COM5_CTS-
NA
NA 9 COM5_RI-
COM5_RI-
COM5_RI-
COM6: RS232/422/485 and 5/12V selectable
Pin
RS-232
RS-422
Half Duplex RS-485
1
COM6_DCD-
TX-
DATA-
2
COM6_RXD
TX+
NA 3 COM6_TXD
RX+
DATA+
4
COM6_DTR-
RX-
NA 5 GND
GND
GND
6
COM6_DSR-
NA
NA 7 COM6_RTS-
NA
NA 8 COM6_CTS-
NA
NA 9 COM6_RI-
COM6_RI-
COM6_RI-
COM4: RS232
Pin
Definition
Pin
Definition
1
COM4_DCD-
2
COM4_RXD
3
COM4_TXD
4
COM4_DTR-
5
GND
6
COM4_DSR-
7
COM4_RTS-
8
COM4_CTS-
9
COM4_RI-
COM3: RS232 port 5/12V selectable
Pin
Definition
Pin
Definition
1
COM3_DCD-
2
COM3_RXD
3
COM3_TXD
4
COM3_DTR-
5
GND
6
COM3_DSR-
7
COM3_RTS-
8
COM3_CTS-
9
COM3P9SEL (Define by JP7)
JP7: COM3 +12V/+5V selection
Pin
Definition
Pin
Definition
1
COM3_RI-
2
COM3P9SEL
3
+5V
4
COM3P9SEL
5
+12V
6
COM3P9SEL
26
INS8335C User’s Manual V1.1
www.perfectron.com
COM2: RS232 port 5/12V selectable
Pin
Definition
Pin
Definition
1
COM2_DCD-
2
COM2_SIN
3
COM2_SOUT
4
COM2_DTR-
5
GND
6
COM2_DSR-
7
COM2_RTS-
8
COM2_CTS-
9
COM2P9SEL (Define by JP6)
JP6: COM2 +12V/+5V selection
Pin
Definition
Pin
Definition
1
COM2_RI-
2
COM2P9SEL
3
+5V
4
COM2P9SEL
5
+12V
6
COM2P9SEL
LPT1: LPT port pin header
Pin
Definition
Pin
Definition
1
-STB
2
-AFD
3
SPD0
4
-LPT1_ERR
5
SPD1
6
-PINIT
7
SPD2
8
-SLIN
9
SPD3
10
GND
11
SPD4
12
GND
13
SPD5
14
GND
15
SPD6
16
GND
17
SPD7
18
GND
19
-LPT1_ACK
20
GND
21
LPT1_BUSY
22
GND
23
LPT1_PE
24
GND
25
LPT1_SLCT
26
MCARD_SEL1: mPCIE/Msata selectable
Pin
Definition
1
mSATA_mPCIE_SEL
2
MCARD1_7
SATA1, SATA2: Serial ATA 3.0 Connector
Pin
Definition
1
GND
2
TXP 3 TXN
4
GND
5
RXN
6
RXP
7
GND
27
INS8335C User’s Manual V1.1
www.perfectron.com
SATA3, SATA4: Serial ATA 2.0 Connector
Pin
Definition
1
GND
2
TXP 3 TXN
4
GND
5
RXN
6
RXP
7
GND
DIO1: Digital input/output pin header
Pin
Definition
PCH
Pin
Definition
PCH
1
SBDO0
GPIO22
2
SBDI0
GPIO2
3
SBDO1
GPIO38
4
SBDI1
GPIO3
5
SBDO2
GPIO39
6
SBDI2
GPIO4
7
SBDO3
GPIO48
8
SBDI3
GPIO5
9
+5V
10
GND
DIO2: Digital input/output pin header
Pin
Definition
PCH
Pin
Definition
PCH
1
SBDO4
GPIO27
2
SBDI4
GPIO11
3
SBDO5
GPIO56
4
SBDI5
GPIO13
5
SBDO6
GPIO73
6
SBDI6
GPIO25
7
SBDO7
GPIO74
8
SBDI7
GPIO46
9
+5V
10
GND
F_USB2: USB2.0 pin header
Pin
Definition
Pin
Definition
1
USBV10
2
USBV11
3
USBD10-
4
USBD11-
5
USBD10+
6
USBD11+
7
GND
8
GND
9 10
GND
F_USB1: USB2.0 pin header
Pin
Definition
Pin
Definition
1
USBV8
2
USBV9
3
USBD8-
4
USBD9-
5
USBD8+
6
USBD9+
7
GND
8
GND
9 10
GND
28
INS8335C User’s Manual V1.1
www.perfectron.com
JCMOS1: RTC Reset
Pin
Definition
1
NC
2
-RTC_RST
3
GND
JP2: Flash Descriptor Security Overide/Intel ME Debug Mode
Pin
Definition
1
NC 2 HDA_SDOUT
3
VCC3_DSW
Flash Descriptor Security Overide/Intel ME Debug Mode
HDA_SDOUT
Low = Default (1-2)
High = Enable
FP1: Front Panel 1
Pin
Definition
Pin
Definition
1
HDLED+
2
PLED+
3
HDD_ACT-
4
PLED-
5
GND
6
-PWRBTN
7
-SYS_RST
8
GND
9
NC
AFP1: LINE‐OUT/MIC‐IN
Pin
Definition
Pin
Definition
1
MIC2_L
2
AGND
3
MIC2_R
4
A_GPIO
5
LIN2_R
6
SRTN1
7
SENSE_B
8
9
LIN2_L
10
SRTN2
SPDIF1: SPDIF OUT
Pin
Definition
1
+5V
2
SPDIF_OUT
3
GND
FP3: LAN LED
Pin
Definition
Pin
Definition
1
+V3.3M_LAN
2
+3.3V_LAN2
3
-LAN1_ACT_F
4
-LAN2_ACT_F
5
-LAN1_LINK1000_F
6
-LAN2_LINK1000_F
7
-LAN1_LINK100_F
8
-LAN2_LINK100_F
29
INS8335C User’s Manual V1.1
www.perfectron.com
Chapter 3: AMI BIOS UTILITY
This chapter provides users with detailed descriptions on how to set up a basic system
configuration through the AMI BIOS setup utility.
3.1 Starting
To enter the setup screens, perform the following steps:
Turn on the computer and press the <Del> key immediately.
After the <Del> key is pressed, the main BIOS setup menu displays. Other setup
screens can be accessed from the main BIOS setup menu, such as the Chipset and
Power menus.
3.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the
BIOS setup utility hot keys can be used at any time during the setup navigation process.
Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys.
Some of the navigation keys may differ from one screen to another.
Left/Right The Left and Right <Arrow> keys moves the cursor to select a menu.
Up/Down The Up and Down <Arrow> keys moves the cursor to select a setup
screen or sub-screen.
+− Plus/Minus The Plus and Minus <Arrow> keys changes the field value of a
particular setup setting.
Tab The <Tab> key selects the setup fields.
F1 The <F1> key displays the General Help screen.
F10 The <F10> key saves any changes made and exits the BIOS setup
utility.
Esc The <Esc> key discards any changes made and exits the BIOS setup
utility.
Enter The <Enter> key displays a sub-screen or changes a selected or
highlighted option in each menu.
30
INS8335C User’s Manual V1.1
www.perfectron.com
3.3 Main Menu
The Main menu is the first screen that you will see when you enter the BIOS Setup
Utility.
System Language
Use this function to select the system language.
31
INS8335C User’s Manual V1.1
www.perfectron.com
System Date
Use this function to change the system date.
Select System Date using the Up and Down <Arrow> keys. Enter the new values through
the keyboard. Press the Left and Right <Arrow> keys to move between fields.
The date setting must be entered in MM/DD/YY format.
System Time
Use this function to change the system time.
Select System Time using the Up and Down <Arrow> keys. Enter the new values through
the keyboard. Press the Left and Right <Arrow> keys to move between fields.
The time setting is entered in HH:MM:SS format.
Note: The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and
5:30 P.M. as 17:30:00.
Access Level
Displays the access level of the current user in the BIOS.
3.4 Advanced Menu
The Advanced Menu allows you to configure your system for basic operation. Some
entries are defaults required by the system board, while others, if enabled, will improve
the performance of your system or let you set some features according to your
preference. Setting incorrect field values may cause the system to malfunction.
32
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.1 ACPI Settings
System ACPI parameters
Enable ACPI Auto Configuration
Enables or disables BIOS ACPI auto configuration.
Enable Hibernation
Enables or disables system ability to hibernate (OS/S4 Sleep State). This option may not
be effective with some OS.
ACPI Sleep State
Select the ACPI sleep state the system will enter when the suspend button is pressed.
Lock Legacy Resources
Enables or Disables System Lock of Legacy Resources.
S3 Video Repost
Enable or disable S3 Video Repost.
33
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.2 CPU Configuration
This section is used to configure the CPU.
34
INS8335C User’s Manual V1.1
www.perfectron.com
Hyper-threading
Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and
Disabled for other OS (OS not optimized for Hyper-Threading Technology). When
disabled only one thread per enabled core is enabled.
Active Processor Cores
Number of cores to enable in each processor package.
Limit CPUID Maximum
Disabled for Windows XP.
Execute Disable Bit
XD can prevent certain classes of malicious buffer overflow attacks when combined with
a supporting OS (Windows Sever 2003 SP1, Windows XP SP2, SuSE Linux 9.2, RedHat
Enterprise 3 Update 3.)
Intel Virtualization Technology
When enabled, a VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology.
Hardware Prefetcher
To turn on/off the Mid Level Cache (L2) streamer prefectcher
Adjacent Cache Line Prefetche
To turn on/off prefectching of adjacent cache lines
TCC Activation Offset
Offset from the factory TCC activation temperature
Primary Plane Current Value
The Maximum instantaneous current allow for primary plane
Secondary Plane Current Value
The Maximum instantaneous current allow for secondary plane
35
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.3 SATA Configuration
This section is used to configure the SATA drives.
SATA Controller(s)
Enable or disable SATA device.
SATA Mode Selection
Determines how SATA controller(s) operate.
SATA Test Selection
Enable or disable Test Mode
IDE Legacy/Native Mode Selection
IDE Legacy/Native Mode Selection
Serial ATA Port 0 – 5
Displays information on the SATA devices detected
36
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.4 Thermal Configuration
Platform thermal configuration options
3.4.4.1 Platform thermal configuration
37
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.5 Intel Rapid Start Technology
38
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.6 Intel TXT(LT) Configuration
Intel Trusted Execution Technology
Intel TXT(LT) Support
Enables or disables Intel TXT(LT) support
3.4.7 PCH-FW Configuration
This section is used to configure Management Engine Technology parameters.
39
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.8 Intel Anti-Theft Technology Configuration
Disabling Intel AT allow user to login platform. This is strictly for testing only. This does
not disable Intel AT services in ME
Intel Anti-Theft Technology
Enable or Disable Intel AT in BIOS for testing only
Intel Anti-Theft Technology Rec
Set the number of times Recovery attemped will be allowed.
40
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.9 AMT Configuration
This section is used to configure Active Management Technology (AMT) options.
Intel AMT
Enable/disables Intel Active Management Technology BIOS extension.
Note: iAMT H/W is always enabled.
This option just controls the BIOS extension execution. If enabled, this requires
additional firmware in the SPI device.
BIOS Hotkey Pressed
Enable/disable BIOS hotkey press.
MEBx Selection Screen
Enable/disable MEBx Selection Screen
Hide Un-Configure ME Confirmation
Hide Un-Configure ME without password confirmation prompt
MEBx Debug Message Screen
Enable MEBx debug message output
Un-Configure ME
Perform AMT/ME unconfigure without password operation.
Amt Wait Timer
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Disable ME
Set ME to Soft Temporary Disabled
41
INS8335C User’s Manual V1.1
www.perfectron.com
ASF
Enable/Disable Alert specification Format
Activate Remote Assistance Process
Trigger CIRA boot.
USB Confirgure
Enable/Disable USB configure function.
PET Progress
User can Enable/Disable PET Events progress to receive PET events or not.
Watchdog Timer
Enable/Disable Watchdog Timer.
3.4.10 USB Configuration
This section is used to configure the USB
Legacy USB Support
Enables Legacy USB support.
AUTO option disables legacy support if no USB devices are connected.
DISABLE option will keep USB devices available only for EFI applications.
USB3.0 Support
Enable/Disable USB3.0 (XHCI) Controller support.
42
INS8335C User’s Manual V1.1
www.perfectron.com
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership
change should be claimed by XHCI driver.
EHCI Hand-off
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership
change should be claimed by EHCI driver.
Port 64/60 Emulation
Enables I/O port 60h/64h emulation support. This should be enabled for the complete
USB keyboard legacy support for non-USB aware OSes.
USB Transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host Controller.
‘Auto’ uses default value: for a Root port it is 100ms, for a Hub port the delay is taken
from Hub descriptor.
3.4.11 F81866 Super IO Configuration
System super IO chip parameters
Serial Port Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an
optimal settings for the Super IO Device.
43
INS8335C User’s Manual V1.1
www.perfectron.com
Parallel Port configuration
Set parameters of parallel port (LPT/LPTE)
3.4.12 F81866 H/W Monitor
This section is used to monitor hardware status such as temperature, fan speed and
voltages.
System Temperature
Detects and displays the current system temperature.
CPU Temperature
Detects and displays the current CPU temperature.
Fan1/2 Speed
Detects and displays the current CPU fan speed.
44
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.13 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console
Redirection configuration settings. Console redirection can be used to remotely operate
system settings and the EFI console.
Console Redirection
Console Redirection Enable or Disable.
Console Redirection Settings
The setting specify how the host computer and the remote computer (which the user is
using) will exchange data. Both computers should have the same or compatible settings.
45
INS8335C User’s Manual V1.1
www.perfectron.com
3.4.14 CPU PPM Configuration
CPU PPM configuration parameters
EIST
Enables or disables Intel SpeedStep.
CPU C3 Report
Enable or disable CPU C3 (ACPI C2) report to OS.
Config TDP LOCK
Lock the Config TDP control register
Long duration power limit
Long duration power limit in Watts, 0 means use factory default.
Long duration maintained
Time window which the long duration power is maintained.
Short duration power limit
Short duration power limit in Watts, 0 means use factory default.
ACPI T State
Enable or disable ACPI state support.
46
INS8335C User’s Manual V1.1
www.perfectron.com
3.5 Chipset
This section gives you functions to configure the system based on the specific features of
the chipset. The chipset manages bus speeds and access to system memory resources.
3.5.1 PCH-IO Configuration
This section allows you to configure the North Bridge Chipset.
47
INS8335C User’s Manual V1.1
www.perfectron.com
USB Configuration
USB configuration settings
PCH Azalia Configuration
PCH Azalia configuration settings
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be
disabled if ME is on at Sx state.)
PCIE LAN Controller
Enable or disable onboard PCIE LAN
Wireless LAN Controller
Enable or disable onboard MPCIE LAN-Wireless LAN.
SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.
Restore AC Power Loss
Select AC power state when power is re-applied after a power failure.
RI Wake Up
RI wake up function select.
Watch Dog Function select
Watch Dog function enabled or disabled.
48
INS8335C User’s Manual V1.1
www.perfectron.com
3.5.1.1 USB Configuration
XHCI Pre-Boot Driver
Enable or disable XHCI Pre-Boot driver support.
XHCI Mode
Mode of operation of XHCI controller
HS Port #1/2/3/4 Switchable
Allows for HS port switching between xHCI and EHCI. If disabled, port is routed to EHCI.
If HS port is routed to xHCI, the corresponding SS port is enabled.
xHCI Streams
Enable or disable xHCI Maximum Primary Stream Array Size.
EHCI1/2
Control the USAB EHCI (USB 2.0) functions. One EHCI controller must always be enabled.
USB Ports Per-Port Disable Control
Control each of the USB ports (0~13) disabling.
49
INS8335C User’s Manual V1.1
www.perfectron.com
3.5.1.2 PCH Azalia Configuration
Azalia
Control Detection of the Azalia device.
Disabled=Azalia will unconditionally disabled.
Enabled=Azalia will be unconditionally enabled.
Auto=Azalia will enabled if present, disabled otherwise.
Azalia PME
Enable or disable Power Management capability of audio controller.
Azalia Internal HDMI codec
Enable or disable internal HDMI codec for Azalia.
50
INS8335C User’s Manual V1.1
www.perfectron.com
3.5.2 System Agent (SA) Configuration
This section is used to configure the System Agent (SA) configuration.
VT-d
Check to enable VT-d function on MCH.
Enable NB CRID
Enable or disable NB CRID WorkAround.
C-State Pre-Wake
Controls C-State Pre-Wake feature for ARAT, in SSKPD[57].
Graphics Configuration
Configure graphics settings
Memory Configuration
Memory configuration parameters
51
INS8335C User’s Manual V1.1
www.perfectron.com
3.5.2.1 Graphics Configuration
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or select SG for
switchable Gfx.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the internal
graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal graphics device.
Gfx Low Power Mode
This option is applicable for SFF only.
Graphics Performance Analyzers
Enable or disable Intel graphics performance analyzers counters.
52
INS8335C User’s Manual V1.1
www.perfectron.com
3.5.2.2 Memory Configuration
53
INS8335C User’s Manual V1.1
www.perfectron.com
3.6 Boot Setting
This section is used to configure the boot features.
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite
waiting.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enables or Disables Quiet Boot option.
Fast Boot
Enables or Disables boot with initialization of a minimal set of devices required to launch
active boot option. Has no effect for BBS boot options.
GateA20 Active
UPON REQUEST – GA20 can be disabled using BIOS services.
ALWAYS – do not allow disabling GA20; this option is useful when any
RT code is executed above 1MB.
Option ROM Messages
Set display mode for Option ROM.
INT19 Trap Response
BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE – execute the trap right
away; POSTPONED – execute the trap during legacy boot.
54
INS8335C User’s Manual V1.1
www.perfectron.com
Boot Option Priorities
Sets the system boot order.
3.7 Security
Use the Security Menu to establish system passwords
Administrator Password
Set administrator password.
User Password
Set User Password.
Secure Boot
Secure boot flow control. Secure boot is possible only if system runs in user mode.
Secure Boot Mode
Secure boot mode selector. ‘Standard’ – fixed secure boot policy, ‘custom’ – changeable
image execution policy and secure boot key databases.
55
INS8335C User’s Manual V1.1
www.perfectron.com
3.8 Save and exit
This screen provides functions for handling changes made to the BIOS settings and the
exiting of the Setup program.
Save Changes and Exit
Exit system setup after saving the changes.
Restore Defaults
Restore or Load Defaults values for all the setup options.
56
Loading...