Air quality detector Instruction of AQ9600
www.perfect-prime.com
cs@perfect-prime.com
Please register product warranty on our website
Table of Content
I. Product overview
II. Considerations
III. Product description
IV. Function setting operation
V. Measurement
VI. New air quality level
VII. Charging
VIII. Product specification
I. Product overview
AQ9600 has the function of measuring PM2.5, PM10, counting of dust particles,
temperature and humidity. The product is provided with high measurement
precision, stable performance and simple operation and convenient to carry. It is
suitable for indoor environment of family, office, inside of cars and natural
environment, etc.
II. Considerations
1. The electronic sensors and microprocessors used on the product belong to
precision electronic device. The product must be kept away from water, fire,
inflammable oil and gas or sites with strong electromagnetic interference to
prevent influence on/damage to the device.
2. Don’t block; or avoid strong air or hot air blowing to the air inlet for air
sampling.
3. Please use dry cloth to wipe the instrument case. Don’t use damp cloth or
corrosive detergents.
4. Don’t dismantle and remodel the product without authorization.
III.Product description
1. Product structure and appearance description
1
Case
2
Temperature and humidity
detection port
3
9V/500mA power supply and
charging interface
4
USB power supply interface
5
Sampling air inlet
6
LCD display screen
7
Keys
8
Exhaust port
2. LCD display description
Number
Display description
1
Hour/minute/second
2
Year/month/day
3
Battery level indication
4
Counting unit
5
Schematic diagram of concentration grade
6
Display area of particle counting
7
Humidity
8
Temperature
9
Measuring object
10
Weight unit
11
Display area of particle weight calculation
3. Key function description
Key
number
Key name and brief function
1
Power key [ ]: press to power on/off.
2
Operating measurement key [RUN]
(1) At the main interface, press to start data sampling.
(2) During the sampling period of 50s, other keys are disabled and cannot
operate. Only power key can function.
3
Enter key [ENTER]
(1)
At the mode of historical record, press--confirm the page number of
the selected pages.
(2)
At the mode of functional parameters, press—confirm to enter
function change.
(3)
At the mode of functional parameters, press—confirm the saved items
after change.
4
SHIFT key [SHIFT]
(1)
At the mode of historical record, press—select the unit’s place, ten's
place and hundred’s place of page number.
(2)
At the mode of functional parameters, press—select the functional
parameter items to be changed.
5
Page up key [▲]
(1)
At the mode of historical record, used to increase by 1 (+1) and page
up by one page.
(2)
At the mode of functional parameters and at the change state: used to
increase by 1 (+1); switching unit and select “yes” or “No”.
6
Page down key[▼]
(1) At the main interface, press in order to enter the historical record→
the functional parameter.
(2) At the mode of historical record, used to decrease by 1 (-1) and page
down by one page.
At the mode of functional parameters and at the change state: used to
decrease by1 ( -1); switching unit and select “yes” or “No”.
7
Back key [BACK]
(1) At the mode of historical record and functional parameters,
press—back to the main interface.
(2) At the mode of historical record, when to change a parameter,
press—exit from the change.
IV. Function setting operation
Function
type
Function
items
Function setting operation
Historical
record
Page
number:
Unit’s
place/ten’s
place/hund
red’s place
Check historical record: at the main interface, press [▼]
key to enter historical record mode; press [ENTER] key and
the current page is selected. At the moment, press [▲] key
or [▼] key to go through the data. If you want to skip to
certain page directly, input the page number directly. Press
[SHIFT] key to select the unit’s place, ten’s place and
hundred’s place of the page number. Press [▲] key to
increase the value by 1 (+1) and press [▼] key to decrease
the value by 1 (-1).
Particle
unit:
piece/L,
ug/m
3
Change the particle unit: at the main interface, press [▼]
key twice to enter the functional parameter mode, press
[ENTER] key to enter the change state. Press [SHIFT] key to
select piece/L or ug/m3. At the moment, press [▲] key or
[▼] key to select your desirable unit and press [ENTER]
key to confirm. Press [BACK] key to return to the main
interface.
Functional
parameters
Time
change
At the main interface, press [▼] key twice to enter the
functional parameter mode, press [ENTER] key to enter the
change state. Press [SHIFT] three times to select “No” in
the item of “changing time”. Press [▲] key or [▼] key to
select “Yes”. Press [ENTER] key to enter time change
interface. Press [SHIFT] key to select the items to be
changed. Press [▲] key to increase the value by 1 (+1) and
press [▼] key to decrease the value by 1 (-1). Press
[ENTER] to confirm. Press [BACK] key to return to the
main interface.
Temperatu
re unit:
°C/°F
At the main interface, press [▼] key twice to enter the
functional parameter mode, and press [ENTER] key to enter
the change state. Press [SHIFT] key six times to select the
items to be changed in “temperature unit”. Press [▲] key
or [▼] key to select “degree centigrade” or “Fahrenheit
degree”. Press [ENTER] key to confirm. Press [BACK] key
to return to the main interface.
Restore
factory-set
value
At the main interface, press [▼] key twice to enter the
functional parameter mode, and press [ENTER] key to enter
the change state. Press [SHIFT] key seven times to select
the items to be changed in “Restore factory-set value”.
Press [▲] key or [▼] key to select “Yes”. Press [ENTER]
key to confirm. The screen displays “restoring factory set
value…”. After completion, press [BACK] key to return to
the main interface. (Users may also use the method to
delete data record).
-
V. Measurement
The instrument should be placed in an open space before measurement to avoid blocking
VI. New air quality standard
Schematic diagram of
concentration grade
Air quality level
PM2.5 average standard
value in 24 hours.
Excellent
0-35
Good
35-75
Slight pollution
75-115
Moderate
pollution
115-150
Heavy pollution
150-250
Serious pollution
>250
VII. Charging
1. The device is provided with the function of display of battery level. When the battery
2. When the adapter is inserted to charge the device, this should be done after
3. Charging should be made in a cool and ventilated room. If the surrounding
4.
Charging may also be made by connecting with a computer through USB. But such
of the sensors. Press the power key to switch on. Press [RUN] key at the main interface
and the instrument will enter the sampling state of 50 seconds. At the moment, do not
operate the instrument first. After completion of sampling, the measurement result will be
displayed on the display screen finally. Users may enter “functional parameter" interface
to set the particle unit so as to realize the switching of measurement mode (counting
mode/weighing mode).
Note: don’t carry out measurement at the time of charging in order to achieve a more
accurate measurement result.
level symbol is displayed as or , please charge in time.
powering off. It takes 2 to 3 hours to charge from empty battery to a full battery.
When it is fully charged, the battery symbol is . The charging should be stopped at
the moment.
temperature is too high, this may cause abnormal heat of the battery and circuit board
or even explosion.
method is not good for the instrument’s service life and suggested to be used seldom.
VIII. Product specification
Principle of PM2.5 Sensors
Optoelectronic type
Sampling method
Pumping type
Light sources
Laser diode
Grain size channels
0. 3um 2.5um 10 um
Flowrate
1L/min
Measurement range
0-1000ug/m3
Resolution ratio
1 ug
Test method
Manual
Sampling time
50s
Sampling method
Pumping type
Typical precision
<20%
Concentration unit
Piece/L | ug/m3
Temperature range
0 〜50°C
Typical precision
土 1°C
Humidity range
0 〜99%RH
Typical precision
±2%RH
Work temperature
-10〜50°C
Working humidity
10〜90%RH
Stored data
999 sets
Automatic power off
2 minutes(no key operation)
Technical specification of adapter
Input: AC100〜240V -50/60Hz;
output: 9VDC, 500mA
Power supply
7.4V chargeable lithium battery
USB
May provide power (unable to
download data)
Startup current
120mA
Working current
200mA
Display method
LCD value display. Color backlight
Screen size
2.8 inches
Screen resolution
320*240
Reset
325g (battery included)
Dimension
245×85×40mm
Loading...