
Read this user guide carefully before using the device.
Welcome to the Perfect Choice world
Connection
To insert the batteries remove the cover and install 2 AAA batteries with the right polarity and then close the
compartment.
USER GUIDE
PC-217213
To use the mouse be sure that the ON/OFF switch is in the ON position.
To connect the dongle just turn on your computer and plug the dongle on any USB free port on your computer.
This mouse is plug & play. Synchronization is done automatically.
Note: When the LED light is on, batteries need to be replaced.

Compatibility
Windows® 8 / 8.1 -> Virtual touch and standard mode
Windows® XP/ Vista / 7 and Mac -> Standard mode
Operation
1 Mode Indicator : Green LED
Press the mode switch button on the wheel to switch between the 2 modes.
Standard Mouse Mode : Green LED Off
When the mouse is switched to the mode, the Green LED will flash for 3
times, 3 cycles of LED on for 0.5 seconds and off for 0.5 seconds.
2. Dpi switch indicator : Red LED
The resolution of the mouse is 800/1600 dpi switchable. Simultaneously press the middle button and the right button for 3
seconds to switch between 800 dpi and 1600 dpi.
To 800 dpi : The Red LED will blink for one time.
To 1600 dpi : The Red LED will blink for two times.
3. Power On Indicator : Red LED
When batteries are installed or power is switched to on, the Red LED on the scroll wheel will be on for 6 seconds.
4. Low Power Indicator : Red LED
If the battery power is low, the Red LED as the low power indicator on the scroll wheel will blink for six seconds when the
mouse is back to start working.
Note: To use Virtual Touch function for win 8 install driver from CD
Special functions
To use the touch emulator, changes to virtual Touch mode with the mode selector button:
• Sliding screen: hold press the left button and move the mouse right / left or above / below.

• Zoom + /- : hold press the side button page up and moving the mouse forward to reduce the image and back to enlarge.
Change home screen to desktop: press the upper side button to change interface Windows 8 meter to display Desktop and vice
versa by pressing the lower button. In the Web browser would run as buttons "Forward" and "back".
Troubleshooting
The mouse does not work
Be sure that dongle is correctly plugged into USB port or change USB port.
Replace batteries.
Make sure the distance between mouse and dongle is 8 meters or less avoiding walls.
Vitual Touch mode do not support dual screens.
Safety and care information
Avoid spilling liquids or water in your equipment.
Handle carefully. Do not drop.

Keep your device away from dust.
Clean your equipment with a dry cloth.
Technical specifications
Dongle:
Voltage……………………………………………………………….. 5 Vdc 100 mA
Mouse:
Voltage………………………………………………………………… 3 Vdc 10 mA
Operation frequency………………………………………………..2.4 GHz
Wireless range……………………………………………………….. 8 meters
Resolution ………………………………………………………………1 000 DPI
Technical specifications are subject to change without prior notice
If you have any question or doubts please do not hesitate to contact us:
Technical support
MEXICO
MX, GDL y MTY 4777 0853
Rest of the country 01800 148 1828
soporte@perfectchoice.me
REST OF THE WORLD
+52 33 3283 1500
+1 855 7373 246
support@perfectchoice.me