Perfect Aire PORTQ12000, PORT8000, PORT10000, PORT12000, PORT14000 User Manual
PORTABLE
AIR CONDITIONER
FOR MODEL:
PORTQ12000
Before using your air conditioner, please
read this manual carefully and keep it for
future reference, along with your receipt.
USER MANUAL
For your own records, please attach a copy of your sales receipt to this manual and complete the following:
Model Number: _____________________________________ Serial Number: _______________________________________
Purchase Date: ____________________________________ Store Purchased: _____________________________________
Installation Date: ___________________________________ Installation Co.: _______________________________________
Installer Name: _____________________________________ Installer Phone No.: ___________________________________
CONSUMER PRODUCT INFORMATION
SAFETY PRECAUTIONS ...................................................................1
IDENTIFICATION OF PARTS ...........................................................3
INSTALLATION INSTRUCTIONS .....................................................5
CARE AND MAINTENANCE ............................................................10
AIR CONDITIONER FEATURES .......................................................11
OPERATING INSTRUCTIONS ..........................................................12
TROUBLESHOOTING .......................................................................14
CONTENTS
This manual provides the information needed for proper use and maintenance
of this air conditioner. Basic preventative care can help extend the life of this
unit. The “Troubleshooting” section in this manual contains a chart with
solutions to the most common problems. Referring to this section may save
time and prevent the need for a service call in the event of a problem.
NOTE: The rating data indicated on the energy label is based on the testing condition of installing the
un-extended air exhaust duct without at mouth, round mouth, and wall exhaust adapters. (The duct
and the adapters are listed in the accessories chart of this Instruction Manual.)
ENERGY SAVING TIPS
• Use the unit in the recommended room size.
• Locate the unit where furniture cannot obstruct the air ow.
• Keep blinds/curtains closed during the sunniest part of the day (cooling mode).
• Keep the lters clean.
• Keep doors and windows closed to keep cool air in and warm air out (cooling mode) or keep warm air in and cool air
out (heating mode for units with heat function).
NOTE: All the illustrations in this manual are for explanation purposes only. Unit purchased may be slightly dierent.
The design and specications are subject to change without prior notice for product improvement. Contact Consumer
Services at 844-472-2473 for details.
OPERATING CONDITIONS
The air conditioner must be operated within the temperature range indicated below:
MODE ROOM TEMPERATURE
COOL 62°F (17°C) – 95°F (35°C)
DRY 55°F (13°C) – 95°F (35°C)
HEAT ≥86°F (30°C)
NOTE: Performance may be
reduced outside of these
operating temperatures.
1
WARNING
DO NOT store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance.
DO NOT use an extension cord or an adapter plug; avoid re hazard or electric shock. Do not remove any prong
from the power cord..
Be sure the electrical service is adequate for the model you have chosen. This information can be found on the
serial plate, which is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize shock or re hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to
use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualied electrician
install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
READ SAFETY PRECAUTIONS BEFORE INSTALLATION
To prevent injury to the user or other people and property damage, the following instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage.
NEVER DO THIS. ALWAYS DO THIS.
SAFETY PRECAUTIONS
CAUTION
• Contact a qualied installer for installation of this unit if necessary.
• Contact a qualied service technician for repair or maintenance of this unit.
• The air conditioner is not intended for use by young children without supervision. Young children should be supervised
to ensure that they do not play with the air conditioner.
• If the power cord is to be replaced, replacement work should be performed by authorized personnel only.
• Installation and repair work must be performed in accordance with the national wiring standards by authorized
personnel only.
• DO NOT operate your air conditioner in a wet room such as a bathroom or laundry room.
• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• Disabled persons may require assistance with setup and/or use.
• DO NOT operate the appliance with a damaged cord or plug. Call Consumer Services at 844-472-2473 if the power
supply cord and/or plug is damaged; it must be replaced by a qualied service technician in order to avoid a hazard.
• Prior to cleaning or other maintenance, the appliance must be disconnected from its main power supply.
• DO NOT install the appliance in a location that may be exposed to combustible gas.
• If combustible gas (or other ammable liquids or vapors) accumulates around the unit, it may cause re.
• DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from trac area and where it will not be tripped over.
• To reduce the risk of re or electric shock, do not use the appliance with any solid-state speed control device.
• The appliance shall be installed in accordance with national wiring regulations.
• When there are dierences between “USER MANUAL” and “Remote Control Manual” on function description, the
description on “USER MANUAL “ shall prevail.
2
SAFETY PRECAUTIONS
Please read through these instructions before you start the installation process. Improper installation can cause damage
to the unit, your personal property, and also poses a personal safety hazard.
• Installation must be performed according to the installation instructions. Improper installation can cause water
leakage, electrical shock, or re.
• Use only the included accessories and parts, and specied tools for the installation. Using non-standard parts can
cause water leakage, electrical shock, re, and injury or property damage.
• Make sure that the outlet you are using is grounded and has the appropriate voltage. The power cord is equipped
with a three-prong grounding plug to protect against shock. Voltage information can be found on the side of the unit,
behind the grille. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse
or circuit breaker, have a qualied electrician install the proper receptacle.
• Ensure the receptacle is accessible after the unit installation.
• Install the unit on a at, level, sturdy surface. Failure to do so could result in damage or excessive noise and vibration.
• The unit must be kept free from obstruction to ensure proper function and to mitigate safety hazards.
• DO NOT modify the length of the power cord or use an extension cord to power the unit.
• DO NOT share a single outlet with other electrical appliances. Improper power supply can cause re or electrical shock.
• DO NOT remove any prong from the power cord.
• DO NOT install your air conditioner in a wet room such as a bathroom or laundry room. Too much exposure to moisture
can cause electrical components to short circuit. Your air conditioner should be used in such a way that it is protected
from moisture (i.e. condensation, splashed water, etc.). Do not place your air conditioner where it can fall or be pulled
into water or any other liquid. If the unit does ever fall into water, unplug it immediately.
• DO NOT install the unit in a location that may be exposed to combustible gas or other ammable liquids or vapors as
this could cause re. Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any
other appliance.
• The unit has wheels to facilitate moving. Make sure not to use the wheels on thick carpet or to roll over objects, as
these could cause tipping. Always transport your air conditioner in a vertical position and stand on a stable, level
surface during use.
• DO NOT operate a unit that has been dropped or damaged.
• DO NOT remove any xed covers from the unit.
• Only use the included accessories and specied parts for installation. Using nonstandard parts can cause water
leakage, electrical shock, re, and injury or property damage.
• The unit must be kept free from obstruction to ensure proper function. Keep an air path of at least 12 in (30 cm) all
around the unit from alls, furniture, and curtains.
• DO NOT allow children to play with the air conditioner. Children must be supervised around the unit at all times.
• If the air conditioner is knocked over during use, turn the unit o and unplug it from the main power supply
immediately. Visually inspect the unit to ensure there is no damage. If you suspect the unit has been damaged, contact
a technician or customer service for assistance.
• In a thunderstorm, unplug the air conditioner to avoid potential lightning damage.
• Turn o the air conditioner when not in use.
• DO NOT touch the unit or plug with wet or damp hands or when barefoot.
• DO NOT press the buttons on the control panel with anything other than your ngers.
• DO NOT remove any xed covers. Never use this appliance if it is not working properly or if it has been dropped
or damaged.
• NEVER use the plug to start or stop the unit. (Always use the switch on the control panel or remote to power the unit on
and o.)
• DO NOT use this product for functions other than those described in the instruction manual.
3
IDENTIFICATION OF PARTS
ACCESSORIES
Check that all the accessories are included in the package (Fig. 1) and refer to the installation instructions for their usage.
Your Window Installation Kit ts windows 26.5 – 48 inches (67.5 – 123 cm) and can be shortened for smaller windows.
TOOLS NEEDED:
• Medium Phillips screwdriver
• Tape measure or ruler
• Knife or scissors
• Saw (optional, to shorten window adapter for narrow windows)
PART DESCRIPTION QUANTITY
Unit Adapter 1 pc
Exhaust Hose 1 pc
Window slider Adapter 1 pc
Bolt 1 pc
Window Slider A 1 pc
Window Slider B 1 pc
Foam Seal A (Adhesive) 2 pcs
Foam Seal B (Adhesive) 2 pcs
Foam Seal C (Non-Adhesive) 1 pc
Security Bracket and 2 Screws 1 set
Drain Hose 1 pc
Power Cord Buckle 1 pc
ON/OFF
TEMP
SHOR T
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEE P
SWING
LED
Remote Control and Batteries 1 set
NOTE: All of the illustrations in this manual are for explanation purposes only. Your air conditioner may be slightly dierent.
FIG. 1
ABOUT FLUORINATED GASES
• This air conditioning unit is a hermetically sealed unit that contains fluorinated gases. For specific
information on the type of gas and the amount, please refer to the relevant label on the unit itself.
• Installation, service, maintenance and repair of this unit must be performed by a certified technician.
• Product uninstallation and recycling must be performed by a certified technician.
• When the unit is checked for leaks, proper record-keeping of all checks is strongly recommended.
Loading...