Perfect Aire 1PAMSHH series, 2PAMSH series, 2PAMSHQC series, 2PAMSDH series, 2PAMSCH series User Manual
FOR SERIES:
1PAMSHH
2PAMSH
2PAMSCH
2PAMSDH
2PAMSHQC
USER MANUAL
REMOTE CONTROL
DUCTLESS MINI-SPLIT SYSTEM
Before using your air conditioner, please
read this manual carefully and keep it for
future reference, along with your receipt.
CONTENTS
Remote Control Specications.................................... 1
Operation of Buttons ................................................... 1
Indicators on the LCD ................................................. 3
How to Use the Buttons .............................................. 4
Auto Operation .......................................... 4
Cooling/Heating/Fan Operation ................4
Dehumidifying Operation ..........................5
Timer Operation ........................................5
Handling the Remote Control ...................................... 9
NOTE:
• Button design is based on standard model. Your remote may dier slightly based on
actual model purchased.
• All functions described herein are accomplished with the indoor unit. If your unit does
not have a certain feature or option there will be no corresponding function when that
specic button is pressed.
• If there are dierences between the Remote Control Manual and Indoor/Outdoor User
Manual on function descriptions, the description in the Indoor/Outdoor User Manual
shall prevail.
1
REMOTE CONTROL SPECIFICATIONS
OPERATION OF BUTTONS
PERFECT AIRE MODELS
• Hyper Heat High Wall Ductless Mini-Split Units 1PAMSHH Series (Single-Zone)
• High Wall Ductless Mini-Split Units 2PAMSH Series (Single-Zone & Multi-Zone)
• Cassette Indoor Units 2PAMSCH Series (Multi-Zone)
• Ducted Indoor Units 2PAMSDH Series (Multi-Zone)
• Quick Connect Ductless Mini-Split Units 2PAMSHQC Series (Single-Zone)
RATED VOLTAGE: 30.V (AAA Dry batteries R03/LR03 x 2)
SIGNAL RECEIVING RANGE: 26 ft (8m)
ENVIRONMENT: 2 3 ° F – 14 0 ° F
1. ON/OFF Button
This button turns the air conditioner ON and
OFF.
2. MODE Button
Press this button to select the air conditioner
mode in the following sequence:
AUTO COOL DRY HEAT FAN
3. FAN Button
Used to select the fan speed as shown:
AUTO LOW MED HIGH
4. SLEEP Button
Activate/Disable Sleep function. Maintains a
comfortable temperature and saves energy.
This function is available on COOL, HEAT,
or AUTO mode only. For more information,
see “Sleep Operation” in the Indoor/Outdoor
User Manual.
NOTE: While the unit is running in SLEEP
mode, if MODE, FAN SPEED, or ON/OFF
button is pressed, the SLEEP function will
be canceled.
5. TURBO Button
Activate/Disable Turbo function. Turbo
function allows for the unit to reach the
preset temperature for cooling or heating
operation in the shortest time. (If the indoor
unit does not support this function, there is
no corresponding operation when this button
is pressed.)
1
7
8
9
10
11
12
13
14
2
3
4
5
6
2
6. SELF CLEAN Button
Activate/Disable Self Clean function.
Under SELF CLEAN mode, the air
conditioner will automatically clan and dry
the Evaporator and keep it fresh for the
next operation.
7. UP Button (
)
Push this button to increase the indoor
temperature setting in 1°F increments to
86°F.
DOWN Button ( )
Push this button to decrease the indoor
temperature setting in 1°F increments to
62°F.
NOTE: Temperature control is not available
in FAN mode.
NOTE: Press and hold UP and DOWN
buttons together for 3 seconds to
alternate the temperature display between
the °F and °C scale.
8. SILENCE/FP Button
• Activate/Disable Silence function: Press
button for more than 2 seconds and the
FP button will be activated. Pressing again
for 2 seconds disables the FP function.
• When the Silence function is activated,
the compressor will operate at low
frequency and the indoor unit will blow
at a faint breeze, which will reduce noise
to the lowest level, creating a quiet and
comfortable room. Due to low frequency
operation of compressor,
it may result in insucient cooling and
heating output.
• The FP function can only be activated
during the heating operation (only when
the setting mode is HEAT). The unit will
operate at a setting temperature of 46°F.
The display window of indoor unit will
display ‘FP’. Pressing the ON/OFF, SLEEP,
FP, MODE, FAN SPEED, UP or DOWN
while operating will cancel the
FP function.
9. TIMER ON Button
Press the button to initiate the auto-on
time sequence. Each press of the button
will increase the auto-time setting in 30
minute increments. When the setting time
displays 10.0, each press of the button
will increase the auto-time setting in 60
minute increments. To cancel the autotime program, simply adjust the auto-on
time to 0.0.
10. TIMER OFF Button
Press the button to initiate the auto-o
time sequence. Each press of the button
will
increase the auto-time setting in 30
minute increments. When the setting time
displays 10.0, each press of the button
will increase the auto-time setting in 60
minute increments. To cancel the autotime program, simply adjust the auto-on
time to 0.0.
11. SWING Button
Used to stop or start horizontal louver
auto swing feature.
12. DIRECT Button
Used to change the louver movement and
set the desired up/down air ow direction.
The louver changes 6° in angle with each
press of the button.
13. FOLLOW ME Button
Push this button to initiate the Follow Me
feature. The remote will display actual
temperature at its location. The remote
control will send this signal to the air
conditioner in 3 minute intervals until the
FOLLOW ME button is pressed again. The
air conditioner will cancel the Follow Me
feature automatically if it does not receive
the signal during any 7 minute interval.
14. LED Button
Disable/Activate indoor screen display.
When pushing this button, the indoor unit
screen display is cleared. Press the button
again to light the display.
Loading...